hydrostat-pload

Module

Description

$Id$

** AUTOMATIC CPARAM.INC GENERATION ************************ Declare (for generation of cparam.inc) the number of f array variables and auxiliary variables added by this module

CPARAM logical, parameter :: linitial_condition = .true.

Quick access

Variables:

a_blob, a_d, a_d_cgs, a_hill, a_s, a_s_cgs, aa_init, aa_save, actos_data, add_noise, air_field_local, alpha_mlt, amp_scale, ampl_diffrot, ampl_kz, ampl_kz0, ampl_norm, amplaa_cgs, amplnrho, ampltt, ampluu, ampluu_cs_factor, ampluu_noise, apara, asym_factor, b0_scale, b0_spiral, b_bkg, b_field, b_theta1, b_theta2, bb0, bb_left, bb_right, blob_scale, blob_sgn, bmax, bonnor_ebert_sphere, braid_margin, braid_shift_x, braid_shift_y, bump_ampl, bump_radius, bump_width, bv, bz_const, calc_phi, cap_field, cb20, chib, chisgs_top, chit0, coeff_cs2, config, configuration, const_alfven, const_alfven_speed, cooling_select, correct_azimuthal_velocity, correct_azimuthal_velocityn, correct_lorentz_numerical, correct_selfgravity, cs0_c, ct0, d, d0, delrho, deltat0, den, density_power_law, direction, dlnndlntaus, dlnrhodlnr, dsize0, dsteep, edtog, ekman, enforce_numerical_equilibrium, eta_vk, etamu0_spiral, extent, fbottom, file, find_max, find_procno, fluxrings, generate_random_hel, grad_p, gravitational_const_init, h_cr, h_d, h_ss, hd, he_factor, heating_select, hel, hscale, hscale_cgs, hydrostatic_lntt, hydrostatic_x, hydrostatic_z, i_point, iglobal_d2rho0, imidplane, infile, infileprefix, init_amp0, init_k0, init_phase0, init_shallow_density, init_shallow_hydro, init_water1, init_water2, init_yk_1, init_yk_2, initaa_dc, initcond_aa, initial_condition, initial_condition_aa, initial_condition_aatest, initial_condition_all, initial_condition_cctest, initial_condition_chemistry, initial_condition_chiral, initial_condition_clean_up, initial_condition_ecr, initial_condition_fcr, initial_condition_lncc, initial_condition_lnrhon, initial_condition_nd, initial_condition_solid_cells, initial_condition_ss, initial_condition_uu, initial_condition_uud, initial_condition_uun, initial_condition_uutest, initial_condition_vvp, initial_condition_xxp, initring, inittt, inituu, input_fac, integrate, integrate_field, ionbeta, ipressurebump, k_aa, k_eta, k_floor, kav, kkx, kky, kkz, kproftype, kramers_hcond0, ksi, kx_ro, kx_tt, kx_uy, kz0, kz_tt, kzspec, l0_d, l_blob, l_d1, l_sigma, lactos_read, lactos_write, ladd_field, ladd_field_azimuthal, ladd_field_vertical, ladd_noise_propto_cs, ladd_points, lane_emden, lcap_field, lcap_field_radius, lcap_field_theta, lcorona, lcorrect_lorentzforce, lcorrect_pressuregradient, lcorrect_selfgravity, lcurved_xy, lcurved_xz, ld2rho0_global, ldragforce_gas, les_data, lgaussian_distributed_noise, lhelaa, lheluu, lin_inpol, linitial_diffrot, lintegrate_potential, lkappa_constchi, lkvec_allocated, llog_distribution, llowk_noise, lnrho0_c, lnrho_init, lntt, lntt_init, lnumerical_mhsequilibrium, logtausmax, logtausmin, lowk_noise_gaussian_rprof, lp_aver, lperturb, lpolynomial_fit_cs2, lreflectua, lregriding, lreinit_water, lrho_const, lscale_kvector_fac, lscale_kvector_tobox, lselfgravity_logspirals, lsi_random, lsinhron, lsmooth, lsplit_temperature, ltanh_prof_xy, ltanh_prof_xz, ltaus_log_center, lthermal_hse, luse_extfield_file, luse_only_botbdry, lwet_spots, lwrite_cooling_profile, lwrite_hcond_profile, lxn, lzerow, m0, machs, mag_prandtl, magnetic_power_law, major_axis, max_rheat, mdot, minor_axis, mk, mphi, mpoly_special, n_blobs, n_foil, n_pot, n_rings, n_smooth, nad, nadd_points, nagrid, ndata, nfraction_cgs, ngamma, nikz, no_of_modes, nohel, npoly1, npoly2, npoly_exp, npoly_fac, npoly_jump, npolyk1, npolyk2, npot, nsmooth, nsteps, ntot_data, nval, nxtab, nytab, nztab, om, om_inner, omega0_spiral, omega_bkg, omega_exponent, omega_vortex, omegab, oo, oocorot, oog, orientation_a, orientation_b, orientation_c, p_ss, parker_wind_iteration, passive_scalar, pbeta, pert, phase, pi2, pi4, pi6, piecewice_poly, pjump, plasma_beta, poly_fit, power_kz, pp_left, pp_right, prandtl, pressure_offset, prof, profile, profile_cc, psi0, psi0d, psi1, psipn0, psipn1, qgshear, r0_d, r0_pot, r0_spiral, r1_k, r1_poly, r_b, r_cyl, r_jet_cent, r_sph, r_ss, ran0, rayleigh, rborder_ext, rborder_int, rbot, rboundb, rbreak, rcav, rcoreb, read_inputk, reality_check, reinitialization, relhel, rescale_ff, rho0_c, rho0ts, rho0ts_cgs, rho_b, rho_exp, rho_fraction, rho_m_0, rho_ratio, rho_rmax, rho_rmin, rho_rms, rho_save, rho_ss, rhoc, rhoin, rhon_to_rho_ratio, rhopj, rhopload, rhow_coeff, rhox, rk4, rm, rmode_mag, ro_pert, ronyblob, rout, rpos, rs, rstar, rtran, s0, scale_aa, scale_kvectorx, scale_kvectory, scale_kvectorz, set_field, set_field_constbeta, set_lntt_first, set_sound_speed, set_thermodynamical_quantities, setup_profiles, setup_tanh, setup_vert_profiles, sharpblob, shocktube, si_amp, si_ev, si_kx, si_kz, sigma_b, sin_th, spine_resolution, spot_init, spot_number, spot_size, ss_save, star_luminosity, steepness, strat_type, stratitype, stretch, t_0, t_b, t_cr, t_init_cgs, t_ss, tc, tcor_jump, thn, ths, time0, tm_bot, tm_top, tout, truncation_degree, truncation_scale, tt, twist, twist_a, twist_b, twist_c, u0, u_hill, upert, uu_right, vdampl_dust, vk0, vm, vtkfile, vv, wbot, weight, wid, width_k, width_npoly, width_ring, width_ring_a, width_ring_b, width_ring_c, width_tanh, width_tube, widthbb1, widthbb2, widthrho, widthuu, word, write_stratification_dat, wtran, x0_drop, x1, x_0, x_b, x_wind, xblobi, xi, xi0, xmax, xmid, xmin, xmodes, xpos, xscale, xshift, xv0, y0_drop, y1, y2, y_b, ybias_aa, yblobi, ymodes, yscale, yshift, yv0, z0_tanh, z1aa, z_0, z_b, z_cr, z_d, z_d_cgs, z_s, z_s_cgs, z_ss, z_tr, zblobi, zc, zmode_mag, zmodes, zpoly, zrho, zscale, zshift

Routines:

initial_condition_aa(), initial_condition_aatest(), initial_condition_all(), initial_condition_cctest(), initial_condition_chemistry(), initial_condition_chiral(), initial_condition_clean_up(), initial_condition_ecr(), initial_condition_fcr(), initial_condition_lncc(), initial_condition_lnrho(), initial_condition_lnrhon(), initial_condition_nd(), initial_condition_solid_cells(), initial_condition_ss(), initial_condition_uu(), initial_condition_uud(), initial_condition_uun(), initial_condition_uutest(), initial_condition_vvp(), initial_condition_xxp(), initialize_initial_condition(), read_initial_condition_pars(), register_initial_condition(), write_initial_condition_pars()

Needed modules

Variables

  • initialcondition/initial_condition_vvp [public]
  • initialcondition/initial_condition_xxp [public]
  • initialcondition/rhopload [real,private/optional/default=1.0]

Subroutines and functions

subroutine  initialcondition/register_initial_condition()

Register variables associated with this module; likely none.

07-may-09/wlad: coded

Call to:

svn_id(), fatal_error()

subroutine  initialcondition/initialize_initial_condition(f)

Initialize any module variables which are parameter dependent.

07-may-09/wlad: coded

Parameters:

f (mx,my,mz,mfarray) [real]

Call to:

fatal_error()

subroutine  initialcondition/initial_condition_all([f[, profiles]])

Initializes all the f arrays in one call. This subroutine is called last.

10-feb-15/MR: added optional parameter ‘profiles’ (intended to replace f)

Parameters:
Use :

equationofstate (cs20(), rho0()), gravity (gravz())

Call to:

fatal_error()

subroutine  initialcondition/read_initial_condition_pars(iomsg)
Parameters:

iomsg [character,out]

Use :

file_io (parallel_unit())

subroutine  initialcondition/write_initial_condition_pars(unit)
Parameters:

unit [integer,in]