cdata

Module

Description

$Id$

Global variables are defined in this module.

Only truly global variables are put in Cdata. Module-specific variables should be defined in the relevant modules. Sharing of module-specific variables is not recommended, but may be accomplished using the subroutines in the SharedVariables module.

Quick access

Variables:

a0_spec, ab_kzspec, ab_phispec, ab_polar, ab_spec, abs_u_spec, advec2, advec2_hypermesh, advec_cs2, allproc_print, alpha_ts, ampl_kinflow_x, ampl_kinflow_y, ampl_kinflow_z, ang_jb_pdf1d, ang_ou_pdf1d, ang_ub_pdf1d, appa_target, appa_target_save, area_xy, area_xz, area_yz, ascale, ascale_type, astaroth_dest, aux_count, aux_var, awig, azbz_spec, b2_spec, b_ell, bb2_spec, bb_fft3d, bb_k00z, bb_kx0z, bb_xkyz, bc_slc_dir, bcx, bcx12, bcy, bcy12, bcz, bcz12, beta_ts, bhat_ts, border_frac_r, border_frac_x, border_frac_y, border_frac_z, box_volume, bxy_spec, c_light, c_light_set, cc_pdf, cc_spec, cdt, cdt_poly, cdtc, cdtf, cdtr, cdts, cdtsrc, cdtv, cdtv2, cdtv3, cform, cform_sound, cformr, cformrz, cformv, cformx, cformxy, cformxz, cformy, cformz, chih, chih_, cname, cname_half, cname_sound, cnamer, cnamerz, cnamev, cnamex, cnamexy, cnamexz, cnamey, cnamez, coeff_grid, coeffs_1_x, coeffs_1_y, coeffs_1_z, comment_char, coord_system, cor_uu, core_ids, cos1th, coseb_pdf, cosph, costh, cotth, cp_set, cr_spec, crash_file_dtmin_factor, cross_spec, crosssec_w, crosssec_x1, crosssec_x2, cvsid, cyinyang_intpol_type, d1davg, d2davg, datadir, datadir_prestart, datadir_snap, daxy_x, daxy_y, daxz_x, daxz_z, dayz_y, dayz_z, ddt, deltay, deltay_save, density_scale_factor, der2_type, df_ode, dfixed_points, dim_mask, directory, directory_collect, directory_dist, directory_prestart, directory_snap, dit1, dline_1, downsampl, drcyl, dsnap, dsnap_down, dsound, dspec, dsurfxy, dsurfyz, dsurfzx, dt, dt0, dt1_max, dt_beta_ts, dt_bhat_ts, dt_epsi, dt_incr, dt_next, dt_ratio, dtdec, dtdiagnos, dtinc, dtmax, dtmin, dtphase_kinflow, dtracers, dvid, dvol, dvol1_x, dvol1_y, dvol1_z, dvol_glob, dvol_x, dvol_y, dvol_z, dx, dx1_scalar, dx1grid, dx2, dx2_bound, dx2_scalar, dx4_scalar, dx6_scalar, dx_1, dx_tilde, dxi_fact, dxmax, dxmax_pencil, dxmin, dxmin_pencil, dxtgrid, dxyz_2, dxyz_4, dxyz_6, dy, dy1_scalar, dy1grid, dy2, dy2_bound, dy2_scalar, dy4_scalar, dy6_scalar, dy_1, dy_tilde, dytgrid, dz, dz1_scalar, dz1grid, dz2, dz2_bound, dz2_scalar, dz4_scalar, dz6_scalar, dz_1, dz_tilde, dztgrid, ee_k00z, ele_spec, em_specflux, emf_spec, enum_ascale_type, enum_unit_system, ep_spec, eps_rkf, eps_rkf0, eps_rkf_diagnos, eps_stiff, errormsg, ev, f_ode, f_ode_diagnostics, farray_smooth_width, fbcx, fbcx_2, fbcx_bot, fbcx_top, fbcy, fbcy_1, fbcy_2, fbcy_bot, fbcy_top, fbcz, fbcz_1, fbcz_2, fbcz_bot, fbcz_top, fi_mixfrac_pdf2d, firstind, fmt_avgs, fname, fname_half, fname_keep, fname_sound, fnamer, fnamerz, fnamex, fnamexy, fnamexz, fnamey, fnamez, force_lower_bound, force_upper_bound, fraction_tborder, fran1, fran2, fshift_ext, fshift_int, fweight, g_newton, gab_spec, gan_spec, gbb_spec, gcc_pdf, glncrosssec, glncrosssec0, gph_spec, grads0, grid_func, gwd_spec, gwe_spec, gwf_spec, gwg_spec, gwh_spec, gwh_spec_boost, gwm_spec, gws_spec, gws_spec_boost, gwt_fft3d, har_spec, hav_spec, hbar, hc_specflux, headt, headtt, hep_spec, hm_specflux, hp_target, hp_target_save, hubble, i_adv_der, i_adv_derx, i_adv_dery, i_adv_derz, iaa, iaak, iaakim, iaatest, iacc, ialfven, ialive, ialpm, iam, iamx, iamy, iamz, iaphi, iapn, iax, iaxtest, iay, iaytest, iaz, iaztest, iaztestpq, ibb, ibb_sph, ibb_sphp, ibb_sphr, ibb_spht, ibbf, ibbt, ibdivu, ibdivux, ibdivuy, ibdivuz, ibgu, ibgux, ibguy, ibguz, ibphi, ibx, ibxf, ibxt, iby, ibyf, ibyt, ibz, ibzf, ibzt, icc, icctest, icctestpq, ichannel1, ichannel2, ichemspec, icool_prof, icooling, icp, idc, idcj, idet, idiag_dt, idiag_dtdiffus, idiag_dtdiffus2, idiag_dtdiffus3, idiag_dtv, idiag_dtvmaxz, idiag_eps_rkf, idiag_it, idiag_maxadvec, idiag_phimphi, idiag_rcylmphi, idiag_rmesh, idiag_rmesh3, idiag_rmphi, idiag_t, idiag_timeperstep, idiag_walltime, idiag_zmphi, iecr, iee, ieek, ieekim, ieta_planet, ietasmag, ietat, ieth, iex, iey, iez, ifcr, ifcrx, ifcry, ifcrz, ifenth, iff_char_c, iff_diff, iff_diff1, iff_diff2, iff_div_aa, iff_div_rho, iff_div_ss, iff_div_uu, iff_heat, iflameind, iggt, iggtim, iggx, iggxim, ighosts_updated, igij, iglobal_ax_ext, iglobal_ay_ext, iglobal_az_ext, iglobal_bx_ext, iglobal_by_ext, iglobal_bz_ext, iglobal_eext, iglobal_glhcx, iglobal_glhcy, iglobal_glhcz, iglobal_jext, iglobal_lnrho0, iglobal_ss0, igpotselfx, igpotselfy, igpotselfz, igpx, igpy, igradu11, igradu12, igradu13, igradu21, igradu22, igradu23, igradu31, igradu32, igradu33, igu11, igu12, igu13, igu21, igu22, igu23, igu31, igu32, igu33, iguij, ihht, ihhtestpq, ihhtim, ihhx, ihhxim, ihij, ihypres, ihypvis, iinvgrid, ij2t, ijbt, ijj, ijjt, ijx, ijxb, ijxbtest, ijxbx, ijxby, ijxbz, ijxt, ijy, ijyt, ijz, ijzt, ikapparho, ikr_frad, ikr_fradx, ikr_frady, ikr_fradz, ilncc, ilndc, ilndcj, ilnnd, ilnrho, ilnrhon, ilorentz, imd, imi, imixfrac, imn, imn_array, ind, inds_max_diags, inds_sum_diags, inetheat, init_loops, inucl, inucrate, inusmag, ioo, ioost, ioot, iox, ioxst, ioxt, ioy, ioyst, ioyt, ioz, iozst, iozt, ip, ip11, ip12, ip13, ip21, ip22, ip23, ip31, ip32, ip33, ipatch, ipencil_swap, iphiuu, ipoly, ipoly_fr, ipotself, ipp, iproc_comm, iproc_p2, iproc_pt, iproc_world, iqrad, iqx, iqy, iqz, ireset_tstart, irho, irho_b, irho_flucz, irhoe, irhon, irhs, irhsx, irhsy, irhsz, irr, isave, isaveglobal, isghtest, ishock, ishock_perp, isld_char, ismagorinsky, ispecialvar, ispecialvar2, ispx, ispy, ispz, israd, iss, iss_b, iss_flucz, iss_run_aver, issat, istress_ij, istresst, istresstim, istressx, istressxim, isupsat, it, it1, it1d, it1start, it_rmv, it_timing, itauascalar, itdiagnos, iterations, itorder, itsnap, itspec, itsub, itt, itt_flucz, ittc, ittold, itype_name, itype_name_half, itype_name_z, iu0x, iu0y, iu0z, iudx, iudy, iudz, iug, iugb, iugbx, iugby, iugbz, iughtest, iugutest, iunx, iuny, iunz, iuu, iuu0, iuu_fluc, iuu_flucx, iuu_flucy, iuu_flucz, iuu_sph, iuu_sphp, iuu_sphr, iuu_spht, iuud, iuun, iuust, iuut, iuutest, iux, iuxb, iuxbtest, iuxbx, iuxby, iuxbz, iuxst, iuxt, iuy, iuyst, iuyt, iuz, iuzst, iuzt, iuztestpq, ivar_omit, ivisc_forc, ivisc_forcx, ivisc_forcy, ivisc_forcz, ivisc_heat, iviscosity, ivv, ivx, ivy, ivz, iwig, iww, iww1, iww2, iww3, ix, ix_loc, iy, iy2, iy2_loc, iy_loc, iyh, iyinyang_intpol_type, iz, iz2, iz2_loc, iz3, iz3_loc, iz4, iz4_loc, iz_loc, j_spec, ja_spec, jb_polar, jb_spec, jj2_spec, jj_fft3d, jj_kx0z, jj_xkyz, jxbxy_spec, k_b, k_b_set, kappa_es, km0em, km1em, kx_kinflow, kx_nyq, ky_kinflow, ky_nyq, kz_kinflow, kz_nyq, l1davg, l1davg_save, l1davgfirst, l1davgfirst_save, l1dphiavg, l1dphiavg_save, l2, l2davg, l2davg_save, l2davgfirst, l2davgfirst_save, l2i, ladv_der_as_aux, lall_onesided, lalpm, lalpm_alternate, lambda5, lappend_pc_constants, lastaroth_output, lav_smallx, lbackup_snap, lbaryons, lbidiagonal_derij, lborder_hyper_diff, lcaproot, lcart_equi, lcartesian_coords, lchemistry_diag_save, lchemonly, lcoarse, lcoarse_mn, lconcurrent, lcooling_ss_mz, lcopysnapshots_exp, lcorotational_frame, lcubed_sphere, lcutoff_corners, lcylinder_in_a_box, lcylindrical_coords, lcylindrical_gravity, ldcore, ldebug, ldensity_linearstart, ldensity_nolog, ldiagnos, ldiagnos_need_zaverages, ldiagnos_save, ldiagnostic_output, ldirect_access, ldisp_current, ldistribute_persist, ldivu_perp, ldownsampl, ldownsampling, ldt, ldt_paronly, ldustdensity_log, ldynamical_diffusion, ldyndiff_useumax, lemergency_brake, lenforce_maux_check, leps_fixed, lequatory, lequatorz, lequidist, lfargo_advection, lfatal_num_vector_369, lfft, lfirst, lfirstpoint, lfix_unit_std, lfixed_points, lfold_df, lfold_df_3points, lforcing_cont, lforeign, lforeign_comm_nblckg, lformat, lfractional_tstep_advance, lfractional_tstep_negative, lfreeze_varext, lfreeze_varint, lfreeze_varsquare, lfrozen_bcs_x, lfrozen_bcs_y, lfrozen_bcs_z, lfrozen_bot_var_x, lfrozen_bot_var_y, lfrozen_bot_var_z, lfrozen_top_var_x, lfrozen_top_var_y, lfrozen_top_var_z, lfullvar_in_slices, lghostfold_usebspline, lglob, lgravr, lgravx, lgravx_dust, lgravx_gas, lgravy, lgravy_dust, lgravy_gas, lgravz, lgravz_dust, lgravz_gas, lignore_nonequi, lini_t_eq_zero, lini_t_eq_zero_once, linterpol_on_repair, lisotropic_advection, lit1_logspacing, lkinflow_as_aux, lklein_gordon, llast, llocal_iso, llsode, lmaxadvec_sum, lmaximal_cdt, lmaximal_cdtv, lmdvar, lmeridional_border_drive, lmodify, lmonolithic_io, lmorton_curve, lmultithread, lnamelist_error, lncc_pdf, lneutraldensity_nolog, lngcc_pdf, lnoghost_strati, lnorth_pole, lnowrite, lnrho_pdf, lnspecial_pdf, lode, lomit_add_data, lor_spec, lout, lout_save, lout_sound, lout_sound_save, loutput_varn_at_exact_tsnap, loutside_avg, lparam_nml, lpdfb, lpdfu, lpdfz1, lpdfz2, lpenc_diagnos, lpenc_diagnos2d, lpenc_requested, lpenc_video, lpencil, lpencil_check, lpencil_check_at_work, lpencil_check_diagnos_opti, lpencil_check_no_zeros, lpencil_check_small, lpencil_diagnos_swap, lpencil_init, lpencil_requested_swap, lpencil_save, lperi, lpersist, lpersistent_it, lphase, lpipe_coords, lpoint, lpoint2, lpole, lproc_p2, lproc_print, lproc_pt, lprocz_slowest, lproper_averages, lpscalar_nolog, lr_spec, lread_aux, lread_from_other_prec, lread_global, lread_less, lread_nogrid, lread_oldsnap, lread_oldsnap_lnrho2rho, lread_oldsnap_mskipvar, lread_oldsnap_nocoolprof, lread_oldsnap_nohydro, lread_oldsnap_nohydro_efield, lread_oldsnap_nohydro_ekfield, lread_oldsnap_nohydro_nomu5, lread_oldsnap_noisothmhd, lread_oldsnap_nomag, lread_oldsnap_nopscalar, lread_oldsnap_noshear, lread_oldsnap_nosink, lread_oldsnap_notestfield, lread_oldsnap_notestflow, lread_oldsnap_notestscalar, lread_oldsnap_onlya, lread_oldsnap_rho2lnrho, lread_scl_factor_file, lread_scl_factor_file_new, lreference_state, lreiterate, lreloading, lrepair_snap, lreport_undefined_diagnostics, lrescaling_magnetic, lrescaling_testfield, lrescaling_testscalar, lreset_boundary_values, lreset_seed, lrhs_test_at_work, lrmv, lrmwig_full, lrmwig_rho, lrmwig_xyaverage, lrotation, lrun, lsave, lseed_global, lseed_procdependent, lseparate_persist, lserial_io, lsfb, lsfflux, lsfu, lsfz1, lsfz2, lshift_datacube_x, lshift_origin, lshift_origin_lower, lshock_heat, lslope_limit_diff, lsmooth_farray, lsnap, lsnap_down, lsnap_tcrit, lsouth_pole, lspec, lspec_at_tplusdt, lspec_start, lspec_tcrit, lspecial_substepped, lsphere_in_a_box, lspherical_coords, lsplit_second, lstart, lstep1, lstop_on_ioerror, lstratz, lsubstepping_in_time, lsubstract_reference_state, lsuppress_parallel_reductions, lswap_init_lnrho_uu, lsymmgrid, ltec, ltemperature_nolog, ltestperturb, ltime_integrals, ltimestep_diagnostics, ltiming_io, ltolerate_namelist_errors, ltracers, luniform_z_mesh_aspect_ratio, lupdate_courant_dt, lupdate_cvs, luse_latitude, luse_oldgrid, luse_xyz1, lvid_tcrit, lvideo, lvideo_save, lvisc_smag, lweno_transport, lwrite_1daverages, lwrite_2d, lwrite_2daverages, lwrite_aux, lwrite_avg1d_binary, lwrite_dim_again, lwrite_dvar, lwrite_fixed_points, lwrite_fsum, lwrite_ic, lwrite_last_powersnap, lwrite_phiaverages, lwrite_phizaverages, lwrite_prof, lwrite_slice_r, lwrite_slice_xy, lwrite_slice_xy2, lwrite_slice_xy3, lwrite_slice_xy4, lwrite_slice_xz, lwrite_slice_xz2, lwrite_slice_yz, lwrite_slices, lwrite_sound, lwrite_tracers, lwrite_ts_hdf5, lwrite_var_anyway, lwrite_xyaverages, lwrite_xzaverages, lwrite_yaverages, lwrite_yzaverages, lwrite_zaverages, lx, lxyz, lxyz_loc, ly, lyinyang, lz, lzaver_on_input, lzorder, m, m2, m2i, m_e, m_h, m_he, m_p, m_u, m_u_set, mag_phispec, mag_spec, mailaddress, mailcmd, maux_down, maux_vtxbuf_index, max_walltime, maxadvec, maxdiffus, maxdiffus2, maxdiffus3, maxsrc, mexts, mm, modify_filename, mpoint, mpoint2, mskipvar, mu0, mu01, mu_spec, mvar_down, mvar_io, n, n2, n2i, n_odevars, name_half_max, naux, naux_com, ncoarse, nconformal, ncoords_sound, ncountsz, nd_spec, ndown, necessary, necessary_imn, neighbors, nexts, nfilter, nghost_read_fewer, nglobal, ngrid_down, ninds, nn, nname, nname_sound, nnamer, nnamerz, nnamev, nnamex, nnamexy, nnamexz, nnamey, nnamez, noghost_for_isave, np_ap_spec, np_spec, nph_rslice, nphis, nphis1, nphis2, npoint, npoint2, nproc_comm, nprocx_node, nprocy_node, nprocz_node, nr_directions, nscratch, nseed, nsnap_backups, nt, ntestfield, ntestflow, ntestlnrho, ntestscalar, nth_rslice, ntmax1dav, ntmax2dav, nu_sts, num_after_timestep, num_helper_threads, num_substeps, number_of_substeps_per_timestep, nv1_capitalvar, nvar, nvol, nvol1, nycut, nzcut, nzgrid_eff, offset_min_calc, old_cdtv, omega_corot, omu_spec, oned, onedall, oo_fft3d, oo_kx0z, oo_spec, oo_xkyz, ou_kzspec, ou_omega, ou_phispec, ou_polar, ou_spec, oun_spec, ouout2_spec, ouout_polar, ouout_spec, out_spec, pdfs, penc0, permute_sts, phi, pipe_func, poleneigh, pot_spec, pretend_lntt, procx_bounds, procy_bounds, procz_bounds, qshear, r1_mn, r2_mn, r2_weight, r2u_spec, r3u_spec, r_ext, r_ext_border, r_int, r_int_border, r_mn, r_ref, r_rslice, radius_diag, rbound, rcorot, rcyl, rcyl_mn, rcyl_mn1, rcyl_mn2, rcyl_weight, re_mesh, reac_chem, reac_dust, reac_pchem, read_vtxbuf_from_gpu, rel_dang, relvel_spec, rfreeze_ext, rfreeze_int, rhocc_pdf, rhop_spec, ro_spec, rsmooth, saffman_aa, saffman_aa_c, saffman_bb, saffman_eem, saffman_eem_uc, saffman_mag, saffman_mag_c, saffman_mag_uc, saffman_ub, save_lastsnap, scl_factor_target, scl_factor_target_save, scl_spec, scl_spec_boost, seed, seed0, seed2, shared_mem_name, sigma_thomson, sigmah_, sigmasb, sigmasb_set, sin1th, sin2th, sinph, sinth, sinth12, sinth_weight, sinth_weight_across_proc, slice_position, sound_coords_list, soundeps, sp_spec, special_module_index, special_pdf, sqrt_ascale, ss_spec, sshear, ssmask1, ssmask2, ssp_spec, sssp_spec, stg_spec, str_spec, stt_spec, stx_spec, submithost, t, t1ddiagnos, t1ddiagnos_save, t2davgfirst, t2davgfirst_save, t_save, t_snap_save, tag_foreign, tanth, tau_aver1, tavg, tborder, tdiagnos, test_nonblocking, tgw_spec, theta, theta_lower_border, theta_upper_border, thetamin, thread_id, timestep_scaling, tmax, tmax_logspacing, toutoff, tphys, tpq_spec, tra_spec, trans_delta, trans_width, trelax_poly, trigger_snap, trigger_spec, trigger_vid, tslice_save, tsnap_crit_log_interval, tsound, tsound_save, tspec, tspec_crit_log_interval, tspec_save, tstart, tt_spec, ttransient, tvid_crit_log_interval, twod, ub_spec, ucp_spec, ud_spec, udrift_bc, unit_density, unit_energy, unit_entropy, unit_flux, unit_length, unit_magnetic, unit_mass, unit_pressure, unit_system, unit_temperature, unit_time, unit_velocity, uot_spec, updated_var_ranges, uu_fft3d, uu_kx0z, uu_xkyz, uut_polar, uut_spec, ux_spec, uxj_phispec, uxj_spec, uxy_spec, uy_spec, uz_spec, uzs_spec, variable_substepped, varname, vct_spec, vct_spec_boost, vec_phispec, vec_spec, vel_phispec, vel_spec, wav1, wav1z, wborder, wborder_ext, wborder_int, wborder_theta_lower, wborder_theta_upper, wfreeze, wfreeze_ext, wfreeze_int, workdir, wweos_target, x, x0, x12, xav_max, xbot_slice, xfreeze_square, xglobal, xgrid, xi_step_frac, xi_step_width, xlneigh, xprim, xtop_slice, xuneigh, xy_spec, xy_specs, xyz0, xyz0_loc, xyz1, xyz1_loc, xyz_star, xyz_step, xyz_units, y, y0, y12, ybot_slice, yequator, yfreeze_square, yglobal, ygrid, ylneigh, yprim, ytop_slice, yuneigh, yy_biquad_weights, z, z0, z12, zbot_slice, zequator, zeta_grid0, zglobal, zgrid, zlneigh, zprim, ztop_slice, zuneigh

Needed modules

• cparam: $Id$

• iso_fortran_env (int64())

Variables

• cdata/a0_spec [logical,public/optional/default=.false.]

• cdata/ab_kzspec [logical,public/optional/default=.false.]

• cdata/ab_phispec [logical,public/optional/default=.false.]

• cdata/ab_polar [logical,public/optional/default=.false.]

• cdata/ab_spec [logical,public/optional/default=.false.]

• cdata/abs_u_spec [logical,public/optional/default=.false.]

• cdata/advec2 (nx) [real,public/optional/default=0.]

• cdata/advec2_hypermesh (nx) [real,public/optional/default=0.]

• cdata/advec_cs2 (nx) [real,public/optional/default=0.]

• cdata/allproc_print [logical,public/optional/default=.true.]

• cdata/alpha_ts (5) [real,public/optional/default=0.0]

• cdata/ampl_kinflow_x [real,public/optional/default=0.0]

• cdata/ampl_kinflow_y [real,public/optional/default=0.0]

• cdata/ampl_kinflow_z [real,public/optional/default=0.0]

• cdata/ang_jb_pdf1d [logical,public/optional/default=.false.]

• cdata/ang_ou_pdf1d [logical,public/optional/default=.false.]

• cdata/ang_ub_pdf1d [logical,public/optional/default=.false.]

• cdata/appa_target [real,public]

• cdata/appa_target_save [real,public]

• cdata/area_xy [real,public/optional/default=1.0]

• cdata/area_xz [real,public/optional/default=1.0]

• cdata/area_yz [real,public/optional/default=1.0]

• cdata/ascale [real,public/optional/default=1.0]

• cdata/ascale_type [character,public/optional/default='default']

• cdata/astaroth_dest [character,public/optional/default='']

• cdata/aux_count [integer,public/optional/default=1]

• cdata/aux_var (maux) [character,public]

• cdata/awig [real,public/optional/default=1.0]

• cdata/azbz_spec [logical,public/optional/default=.false.]

• cdata/b2_spec [logical,public/optional/default=.false.]

• cdata/b_ell [real,public/optional/default=1.0]

• cdata/bb2_spec [logical,public/optional/default=.false.]

• cdata/bb_fft3d [logical,public/optional/default=.false.]

• cdata/bb_k00z [logical,public/optional/default=.false.]

• cdata/bb_kx0z [logical,public/optional/default=.false.]

• cdata/bb_xkyz [logical,public/optional/default=.false.]

• cdata/bc_slc_dir [character,public/optional/default='']

• cdata/bcx (mcom) [character,public/optional/default='p']

• cdata/bcx12 (mcom,2) [character,public/optional/default='']

• cdata/bcy (mcom) [character,public/optional/default='p']

• cdata/bcy12 (mcom,2) [character,public/optional/default='']

• cdata/bcz (mcom) [character,public/optional/default='p']

• cdata/bcz12 (mcom,2) [character,public/optional/default='']

• cdata/beta_ts (5) [real,public/optional/default=0.0]

• cdata/bhat_ts (5) [real,public/optional/default=0.0]

• cdata/border_frac_r (2) [real,public/optional/default=0.0]

• cdata/border_frac_x (2) [real,public/optional/default=0.0]

• cdata/border_frac_y (2) [real,public/optional/default=0.0]

• cdata/border_frac_z (2) [real,public/optional/default=0.0]

• cdata/box_volume [real,public/optional/default=1.0]

• cdata/bxy_spec [logical,public/optional/default=.false.]

• cdata/c_light [real,public/optional/default=impossible]

• cdata/c_light_set [real,public/optional/default=1.0]

• cdata/cc_pdf [logical,public/optional/default=.false.]

• cdata/cc_spec [logical,public/optional/default=.false.]

• cdata/cdt [real,public/optional/default=0.9]

• cdata/cdt_poly [real,public/optional/default=1.0]

• cdata/cdtc [real,public/optional/default=1.0]

• cdata/cdtf [real,public/optional/default=0.9]

• cdata/cdtr [real,public/optional/default=1.0]

• cdata/cdts [real,public/optional/default=1.0]

• cdata/cdtsrc [real,public/optional/default=1.0]

  PAR_DOC: empirical time step factor for source terms (1/time)

• cdata/cdtv [real,public/optional/default=0.25]

• cdata/cdtv2 [real,public/optional/default=0.03]

• cdata/cdtv3 [real,public/optional/default=0.01]

• cdata/cform (*) [character,public/allocatable]

• cdata/cform_sound (*) [character,public/allocatable]

• cdata/cformr (*) [character,public/allocatable]

• cdata/cformrz (*) [character,public/allocatable]

• cdata/cformv (*) [character,public/allocatable]

• cdata/cformx (*) [character,public/allocatable]

• cdata/cformxy (*) [character,public/allocatable]

• cdata/cformxz (*) [character,public/allocatable]

• cdata/cformy (*) [character,public/allocatable]

• cdata/cformz (*) [character,public/allocatable]

• cdata/chih [real,public]

• cdata/chih_ [real,public]

• cdata/cname (*) [character,public/allocatable]

• cdata/cname_half (mname_half) [character,public]

• cdata/cname_sound (*) [character,public/allocatable]

• cdata/cnamer (*) [character,public/allocatable]

• cdata/cnamerz (*) [character,public/allocatable]

• cdata/cnamev (*) [character,public/allocatable]

• cdata/cnamex (*) [character,public/allocatable]

• cdata/cnamexy (*) [character,public/allocatable]

• cdata/cnamexz (*) [character,public/allocatable]

• cdata/cnamey (*) [character,public/allocatable]

• cdata/cnamez (*) [character,public/allocatable]

• cdata/coeff_grid (3) [real,public/optional/default=1.0]

• cdata/coeffs_1_x (1 + 2 * nghost,2) [real,public]

• cdata/coeffs_1_y (1 + 2 * nghost,2) [real,public]

• cdata/coeffs_1_z (1 + 2 * nghost,2) [real,public]

• cdata/comment_char [character,public/optional/default='#']

• cdata/coord_system [character,public/optional/default='cartesian']

• cdata/cor_uu [logical,public/optional/default=.false.]

• cdata/core_ids (max_threads_possible) [integer,public]

• cdata/cos1th (my) [real,public]

• cdata/coseb_pdf [logical,public/optional/default=.false.]

• cdata/cosph (mz) [real,public]

• cdata/costh (my) [real,public]

• cdata/cotth (my) [real,public]

• cdata/cp_set [real,public/optional/default=1.0]

• cdata/cr_spec [logical,public/optional/default=.false.]

• cdata/crash_file_dtmin_factor [real,public/optional/default=-1.0]

• cdata/cross_spec [character,public/optional/default='']

  used to calculate cross spectra. Example: cross_spec=’u.ru’

• cdata/crosssec_w [real,public/optional/default=0.1]

• cdata/crosssec_x1 [real,public/optional/default=-1.0]

• cdata/crosssec_x2 [real,public/optional/default=1.0]

• cdata/cvsid [character,public/optional/default='no cvsid is given in start.in or run.in!']

  ‘ !PAR_DOC:

• cdata/cyinyang_intpol_type [character,public/optional/default='bilinear']

• cdata/d1davg [real,public/optional/default=impossible]

  PAR_DOC: save 1D (xy, yz, …) averages every d1davg time units (overrides it1d)

• cdata/d2davg [real,public/optional/default=100.0]

  PAR_DOC: save 2D (x, y, …) averages every d2davg time units

• cdata/datadir [character,public/optional/default='data']

• cdata/datadir_prestart [character,public/optional/default='data_prestart']

• cdata/datadir_snap [character,public/optional/default='']

• cdata/daxy_x (mx) [real,public]

• cdata/daxy_y (my) [real,public]

• cdata/daxz_x (mx) [real,public]

• cdata/daxz_z (mz) [real,public]

• cdata/dayz_y (my) [real,public]

• cdata/dayz_z (mz) [real,public]

• cdata/ddt [real,public/optional/default=0.0]

• cdata/deltay [real,public/optional/default=0.0]

• cdata/deltay_save [real,public]

• cdata/density_scale_factor [real,public/optional/default=impossible]

• cdata/der2_type [character,public/optional/default='standard']

• cdata/df_ode (*) [real,public/allocatable]

• cdata/dfixed_points [real,public/optional/default=0.0]

• cdata/dim_mask (3) [integer,public/optional/default=(/1,2,3/)]

• cdata/directory [character,public/optional/default='']

• cdata/directory_collect [character,public/optional/default='']

• cdata/directory_dist [character,public/optional/default='']

• cdata/directory_prestart [character,public/optional/default='']

• cdata/directory_snap [character,public/optional/default='']

• cdata/dit1 [real,public/optional/default=impossible]

• cdata/dline_1 (nx,3) [real,public]

• cdata/downsampl (3) [integer,public/optional/default=1]

• cdata/drcyl [real,public]

• cdata/dsnap [real,public/optional/default=100.0]

  PAR_DOC: save a snapshot (VAR file) every dsnap time units

• cdata/dsnap_down [real,public/optional/default=0.0]

  PAR_DOC: save a downsampled snapshot every dsnap_down time units

• cdata/dsound [real,public/optional/default=0.0]

• cdata/dspec [real,public/optional/default=impossible]

  PAR_DOC: save power spectra every dspec time units

• cdata/dsurfxy [real,public]

• cdata/dsurfyz [real,public]

• cdata/dsurfzx [real,public]

• cdata/dt [real,public/optional/default=0.0]

• cdata/dt0 [real,public/optional/default=0.0]

• cdata/dt1_max (nx) [real,public/target]

• cdata/dt_beta_ts (5) [real,public/optional/default=1.0]

• cdata/dt_bhat_ts (5) [real,public/optional/default=1.0]

• cdata/dt_epsi [real,public/optional/default=1e-07]

• cdata/dt_incr [real,public/optional/default=0.0]

• cdata/dt_next [real,public/optional/default=0.0]

• cdata/dt_ratio [real,public/optional/default=1e-05]

• cdata/dtdec [real,public/optional/default=0.5]

• cdata/dtdiagnos [real,public]

• cdata/dtinc [real,public/optional/default=0.5]

• cdata/dtmax [real,public/optional/default=1e+37]

• cdata/dtmin [real,public/optional/default=1e-06]

• cdata/dtphase_kinflow [real,public/optional/default=0.0]

• cdata/dtracers [real,public/optional/default=0.0]

• cdata/dvid [real,public/optional/default=0.0]

  PAR_DOC: save slice (video) files every dvid time units.

• cdata/dvol (nx) [real,public]

• cdata/dvol1_x (mx) [real,public]

• cdata/dvol1_y (my) [real,public]

• cdata/dvol1_z (mz) [real,public]

• cdata/dvol_glob [real,public]

• cdata/dvol_x (mx) [real,public]

• cdata/dvol_y (my) [real,public]

• cdata/dvol_z (mz) [real,public]

• cdata/dx [real,public]

• cdata/dx1_scalar [real,public/optional/default=0.0]

• cdata/dx1grid (nxgrid) [real,public]

• cdata/dx2 (mx) [real,public]

• cdata/dx2_bound (1 + 2 * nghost) [real,public/optional/default=0.]

• cdata/dx2_scalar [real,public]

• cdata/dx4_scalar [real,public]

• cdata/dx6_scalar [real,public]

• cdata/dx_1 (mx) [real,public]

• cdata/dx_tilde (mx) [real,public]

• cdata/dxi_fact (3) [real,public/optional/default=1.0]

• cdata/dxmax [real,public]

• cdata/dxmax_pencil (nx) [real,public]

• cdata/dxmin [real,public]

• cdata/dxmin_pencil (nx) [real,public]

• cdata/dxtgrid (nxgrid) [real,public]

• cdata/dxyz_2 (nx) [real,public]

• cdata/dxyz_4 (nx) [real,public]

• cdata/dxyz_6 (nx) [real,public]

• cdata/dy [real,public]

• cdata/dy1_scalar [real,public/optional/default=0.0]

• cdata/dy1grid (nygrid) [real,public]

• cdata/dy2 (my) [real,public]

• cdata/dy2_bound (1 + 2 * nghost) [real,public/optional/default=0.]

• cdata/dy2_scalar [real,public]

• cdata/dy4_scalar [real,public]

• cdata/dy6_scalar [real,public]

• cdata/dy_1 (my) [real,public]

• cdata/dy_tilde (my) [real,public]

• cdata/dytgrid (nygrid) [real,public]

• cdata/dz [real,public]

• cdata/dz1_scalar [real,public/optional/default=0.0]

• cdata/dz1grid (nzgrid) [real,public]

• cdata/dz2 (mz) [real,public]

• cdata/dz2_bound (1 + 2 * nghost) [real,public/optional/default=0.]

• cdata/dz2_scalar [real,public]

• cdata/dz4_scalar [real,public]

• cdata/dz6_scalar [real,public]

• cdata/dz_1 (mz) [real,public]

• cdata/dz_tilde (mz) [real,public]

• cdata/dztgrid (nzgrid) [real,public]

• cdata/ee_k00z [logical,public/optional/default=.false.]

• cdata/ele_spec [logical,public/optional/default=.false.]

• cdata/em_specflux [logical,public/optional/default=.false.]

• cdata/emf_spec [logical,public/optional/default=.false.]

• cdata/enum_ascale_type [integer,public/optional/default=0]

• cdata/enum_unit_system [integer,public/optional/default=0]

• cdata/ep_spec [logical,public/optional/default=.false.]

• cdata/eps_rkf [real,public/optional/default=1e-05]

• cdata/eps_rkf0 [real,public/optional/default=0.0]

• cdata/eps_rkf_diagnos [real,public]

• cdata/eps_stiff [real,public/optional/default=1e-06]

• cdata/errormsg [character,public]

• cdata/ev [real,public]

• cdata/f_ode (*) [real,public/allocatable]

• cdata/f_ode_diagnostics (*) [real,public/allocatable]

• cdata/farray_smooth_width [integer,public/optional/default=6]

• cdata/fbcx (mcom,2) [real,public/optional/default=0.]

• cdata/fbcx_2 (mcom,2) [real,public/optional/default=0.]

• cdata/fbcx_bot (mcom) [real,public/optional/default=0.]

• cdata/fbcx_top (mcom) [real,public/optional/default=0.]

• cdata/fbcy (mcom,2) [real,public/optional/default=0.]

• cdata/fbcy_1 (mcom,2) [real,public/optional/default=0.]

• cdata/fbcy_2 (mcom,2) [real,public/optional/default=0.]

• cdata/fbcy_bot (mcom) [real,public/optional/default=0.]

• cdata/fbcy_top (mcom) [real,public/optional/default=0.]

• cdata/fbcz (mcom,2) [real,public/optional/default=0.]

• cdata/fbcz_1 (mcom,2) [real,public/optional/default=0.]

• cdata/fbcz_2 (mcom,2) [real,public/optional/default=0.]

• cdata/fbcz_bot (mcom) [real,public/optional/default=0.]

• cdata/fbcz_top (mcom) [real,public/optional/default=0.]

• cdata/fi_mixfrac_pdf2d [logical,public/optional/default=.false.]

• cdata/firstind (3) [integer,public/optional/default=1]

• cdata/fmt_avgs [character,public/optional/default='e14.5e3']

• cdata/fname (*) [real,public/target/allocatable]

• cdata/fname_half (mname_half,2) [real,public]

• cdata/fname_keep (*) [real,public/target/allocatable]

• cdata/fname_sound (*,*) [real,public/target/allocatable]

• cdata/fnamer (*,*) [real,public/target/allocatable]

• cdata/fnamerz (*,*,*,*) [real,public/target/allocatable]

• cdata/fnamex (*,*,*) [real,public/target/allocatable]

• cdata/fnamexy (*,*,*) [real,public/target/allocatable]

• cdata/fnamexz (*,*,*) [real,public/target/allocatable]

• cdata/fnamey (*,*,*) [real,public/target/allocatable]

• cdata/fnamez (*,*,*) [real,public/target/allocatable]

• cdata/force_lower_bound [character,public/optional/default='']

• cdata/force_upper_bound [character,public/optional/default='']

• cdata/fraction_tborder [real,public/optional/default=1.0]

• cdata/fran1 (2) [real,public]

• cdata/fran2 (2) [real,public]

• cdata/fshift_ext [real,public/optional/default=1.0]

• cdata/fshift_int [real,public/optional/default=-1.0]

• cdata/fweight (mname) [real,public/optional/default=0.0]

• cdata/g_newton [real,public/optional/default=impossible]

• cdata/gab_spec [logical,public/optional/default=.false.]

• cdata/gan_spec [logical,public/optional/default=.false.]

• cdata/gbb_spec [logical,public/optional/default=.false.]

• cdata/gcc_pdf [logical,public/optional/default=.false.]

• cdata/glncrosssec (nx) [real,public]

• cdata/glncrosssec0 [real,public/optional/default=0.0]

• cdata/gph_spec [logical,public/optional/default=.false.]

• cdata/grads0 [real,public/optional/default=0.0]

  (1/c_p)ds/dz

• cdata/grid_func (3) [character,public/optional/default='linear']

• cdata/gwd_spec [logical,public/optional/default=.false.]

• cdata/gwe_spec [logical,public/optional/default=.false.]

• cdata/gwf_spec [logical,public/optional/default=.false.]

• cdata/gwg_spec [logical,public/optional/default=.false.]

• cdata/gwh_spec [logical,public/optional/default=.false.]

• cdata/gwh_spec_boost [logical,public/optional/default=.false.]

• cdata/gwm_spec [logical,public/optional/default=.false.]

• cdata/gws_spec [logical,public/optional/default=.false.]

• cdata/gws_spec_boost [logical,public/optional/default=.false.]

• cdata/gwt_fft3d [logical,public/optional/default=.false.]

• cdata/har_spec [logical,public/optional/default=.false.]

• cdata/hav_spec [logical,public/optional/default=.false.]

• cdata/hbar [real,public/optional/default=impossible]

• cdata/hc_specflux [logical,public/optional/default=.false.]

• cdata/headt [logical,public/optional/default=.false.]

• cdata/headtt [logical,public/optional/default=.true.]

• cdata/hep_spec [logical,public/optional/default=.false.]

• cdata/hm_specflux [logical,public/optional/default=.false.]

• cdata/hp_target [real,public]

• cdata/hp_target_save [real,public]

• cdata/hubble [real,public/optional/default=0.0]

• cdata/i_adv_der [integer,public/optional/default=0]

• cdata/i_adv_derx [integer,public/optional/default=0]

• cdata/i_adv_dery [integer,public/optional/default=0]

• cdata/i_adv_derz [integer,public/optional/default=0]

• cdata/iaa [integer,public/optional/default=0]

• cdata/iaak [integer,public]

• cdata/iaakim [integer,public]

• cdata/iaatest [integer,public/optional/default=0]

• cdata/iacc [integer,public/optional/default=0]

• cdata/ialfven [integer,public/optional/default=0]

• cdata/ialive [integer,public/optional/default=0]

• cdata/ialpm [integer,public/optional/default=0]

• cdata/iam [integer,public/optional/default=0]

• cdata/iamx [integer,public/optional/default=0]

• cdata/iamy [integer,public/optional/default=0]

• cdata/iamz [integer,public/optional/default=0]

• cdata/iaphi [integer,public/optional/default=0]

• cdata/iapn (ndustrad) [integer,public/optional/default=0]

• cdata/iax [integer,public/optional/default=0]

• cdata/iaxtest [integer,public/optional/default=0]

• cdata/iay [integer,public/optional/default=0]

• cdata/iaytest [integer,public/optional/default=0]

• cdata/iaz [integer,public/optional/default=0]

• cdata/iaztest [integer,public/optional/default=0]

• cdata/iaztestpq [integer,public/optional/default=0]

• cdata/ibb [integer,public/optional/default=0]

• cdata/ibb_sph [integer,public/optional/default=0]

• cdata/ibb_sphp [integer,public/optional/default=0]

• cdata/ibb_sphr [integer,public/optional/default=0]

• cdata/ibb_spht [integer,public/optional/default=0]

• cdata/ibbf [integer,public/optional/default=0]

• cdata/ibbt [integer,public/optional/default=0]

• cdata/ibdivu [integer,public/optional/default=0]

• cdata/ibdivux [integer,public/optional/default=0]

• cdata/ibdivuy [integer,public/optional/default=0]

• cdata/ibdivuz [integer,public/optional/default=0]

• cdata/ibgu [integer,public/optional/default=0]

• cdata/ibgux [integer,public/optional/default=0]

• cdata/ibguy [integer,public/optional/default=0]

• cdata/ibguz [integer,public/optional/default=0]

• cdata/ibphi [integer,public/optional/default=0]

• cdata/ibx [integer,public/optional/default=0]

• cdata/ibxf [integer,public/optional/default=0]

• cdata/ibxt [integer,public/optional/default=0]

• cdata/iby [integer,public/optional/default=0]

• cdata/ibyf [integer,public/optional/default=0]

• cdata/ibyt [integer,public/optional/default=0]

• cdata/ibz [integer,public/optional/default=0]

• cdata/ibzf [integer,public/optional/default=0]

• cdata/ibzt [integer,public/optional/default=0]

• cdata/icc [integer,public/optional/default=0]

• cdata/icctest [integer,public/optional/default=0]

• cdata/icctestpq [integer,public/optional/default=0]

• cdata/ichannel1 [integer,public/optional/default=1]

• cdata/ichannel2 [integer,public/optional/default=1]

• cdata/ichemspec (nchemspec) [integer,public/optional/default=0]

• cdata/icool_prof [integer,public/optional/default=0]

• cdata/icooling [integer,public/optional/default=0]

• cdata/icp [integer,public/optional/default=0]

• cdata/ics [integer,public/optional/default=0]

• cdata/idc (ndustspec) [integer,public/optional/default=0]

• cdata/idcj (ndustspec,ndustspec0) [integer,public/optional/default=0]

• cdata/idet [integer,public/optional/default=0]

• cdata/idiag_dt [integer,public/optional/default=0]

  DIAG_DOC: time step $delta t$

• cdata/idiag_dtdiffus [integer,public/optional/default=0]

  DIAG_DOC: diffusive timestep as a

• cdata/idiag_dtdiffus2 [integer,public/optional/default=0]

  DIAG_DOC: hyperdiffusive (hyper2) timestep

• cdata/idiag_dtdiffus3 [integer,public/optional/default=0]

  DIAG_DOC: hyperdiffusive (hyper3) timestep

• cdata/idiag_dtv [integer,public/optional/default=0]

  DIAG_DOC: advective timestep as a

• cdata/idiag_dtvmaxz [integer,public/optional/default=0]

  XYAVG_DOC: z-dependent version of dtv

• cdata/idiag_eps_rkf [integer,public/optional/default=0]

  DIAG_DOC: time step accuracy threshold

• cdata/idiag_it [integer,public/optional/default=0]

  DIAG_DOC: number of time step

• cdata/idiag_maxadvec [integer,public/optional/default=0]

  DIAG_DOC: maxadvec

• cdata/idiag_phimphi [integer,public/optional/default=0]

  PHIAVG_DOC: azimuthal angle

• cdata/idiag_rcylmphi [integer,public/optional/default=0]

  PHIAVG_DOC: cylindrical radius

• cdata/idiag_rmesh [integer,public/optional/default=0]

  DIAG_DOC: $R_{rm mesh}$

• cdata/idiag_rmesh3 [integer,public/optional/default=0]

  DIAG_DOC: $R_{rm mesh}^{(3)}$

• cdata/idiag_rmphi [integer,public/optional/default=0]

  PHIAVG_DOC: spherical radius

• cdata/idiag_t [integer,public/optional/default=0]

  DIAG_DOC: time $t$ quad(since start.csh)

• cdata/idiag_timeperstep [integer,public/optional/default=0]

  DIAG_DOC:

• cdata/idiag_walltime [integer,public/optional/default=0]

  DIAG_DOC: wall clock time since start of

• cdata/idiag_zmphi [integer,public/optional/default=0]

  PHIAVG_DOC: $z$-coordinate

• cdata/iecr [integer,public/optional/default=0]

• cdata/iee [integer,public/optional/default=0]

• cdata/ieek [integer,public]

• cdata/ieekim [integer,public]

• cdata/ieta_planet [integer,public/optional/default=0]

• cdata/ietasmag [integer,public/optional/default=0]

• cdata/ietat [integer,public/optional/default=0]

• cdata/ieth [integer,public/optional/default=0]

• cdata/iex [integer,public/optional/default=0]

• cdata/iey [integer,public/optional/default=0]

• cdata/iez [integer,public/optional/default=0]

• cdata/ifcr [integer,public/optional/default=0]

• cdata/ifcrx [integer,public/optional/default=0]

• cdata/ifcry [integer,public/optional/default=0]

• cdata/ifcrz [integer,public/optional/default=0]

• cdata/ifenth [integer,public/optional/default=0]

• cdata/iff_char_c [integer,public/optional/default=0]

• cdata/iff_diff [integer,public/optional/default=0]

• cdata/iff_diff1 [integer,public/optional/default=0]

• cdata/iff_diff2 [integer,public/optional/default=0]

• cdata/iff_div_aa [integer,public/optional/default=0]

• cdata/iff_div_rho [integer,public/optional/default=0]

• cdata/iff_div_ss [integer,public/optional/default=0]

• cdata/iff_div_uu [integer,public/optional/default=0]

• cdata/iff_heat [integer,public/optional/default=0]

• cdata/iflameind [integer,public]

• cdata/iggt [integer,public/optional/default=0]

• cdata/iggtim [integer,public/optional/default=0]

• cdata/iggx [integer,public/optional/default=0]

• cdata/iggxim [integer,public/optional/default=0]

• cdata/ighosts_updated [integer,public/optional/default=-1]

• cdata/igij [integer,public/optional/default=0]

• cdata/iglobal_ax_ext [integer,public/optional/default=0]

• cdata/iglobal_ay_ext [integer,public/optional/default=0]

• cdata/iglobal_az_ext [integer,public/optional/default=0]

• cdata/iglobal_bx_ext [integer,public/optional/default=0]

• cdata/iglobal_by_ext [integer,public/optional/default=0]

• cdata/iglobal_bz_ext [integer,public/optional/default=0]

• cdata/iglobal_eext (3) [integer,public]

• cdata/iglobal_glhc [integer,public/optional/default=0]

• cdata/iglobal_glhcx [integer,public/optional/default=0]

• cdata/iglobal_glhcy [integer,public/optional/default=0]

• cdata/iglobal_glhcz [integer,public/optional/default=0]

• cdata/iglobal_hcond [integer,public/optional/default=0]

• cdata/iglobal_jext (3) [integer,public/optional/default=0]

• cdata/iglobal_lnrho0 [integer,public/optional/default=0]

• cdata/iglobal_ss0 [integer,public/optional/default=0]

• cdata/igpotselfx [integer,public/optional/default=0]

• cdata/igpotselfy [integer,public/optional/default=0]

• cdata/igpotselfz [integer,public/optional/default=0]

• cdata/igpx [integer,public/optional/default=0]

• cdata/igpy [integer,public/optional/default=0]

• cdata/igradu11 [integer,public/optional/default=0]

• cdata/igradu12 [integer,public/optional/default=0]

• cdata/igradu13 [integer,public/optional/default=0]

• cdata/igradu21 [integer,public/optional/default=0]

• cdata/igradu22 [integer,public/optional/default=0]

• cdata/igradu23 [integer,public/optional/default=0]

• cdata/igradu31 [integer,public/optional/default=0]

• cdata/igradu32 [integer,public/optional/default=0]

• cdata/igradu33 [integer,public/optional/default=0]

• cdata/igu11 [integer,public/optional/default=0]

• cdata/igu12 [integer,public/optional/default=0]

• cdata/igu13 [integer,public/optional/default=0]

• cdata/igu21 [integer,public/optional/default=0]

• cdata/igu22 [integer,public/optional/default=0]

• cdata/igu23 [integer,public/optional/default=0]

• cdata/igu31 [integer,public/optional/default=0]

• cdata/igu32 [integer,public/optional/default=0]

• cdata/igu33 [integer,public/optional/default=0]

• cdata/iguij [integer,public/optional/default=0]

• cdata/ihht [integer,public/optional/default=0]

• cdata/ihhtestpq [integer,public/optional/default=0]

• cdata/ihhtim [integer,public/optional/default=0]

• cdata/ihhx [integer,public/optional/default=0]

• cdata/ihhxim [integer,public/optional/default=0]

• cdata/ihij [integer,public/optional/default=0]

• cdata/ihypres [integer,public/optional/default=0]

• cdata/ihypvis [integer,public/optional/default=0]

• cdata/iinvgrid [integer,public/optional/default=0]

• cdata/ij2t [integer,public/optional/default=0]

• cdata/ijbt [integer,public/optional/default=0]

• cdata/ijj [integer,public/optional/default=0]

• cdata/ijjt [integer,public/optional/default=0]

• cdata/ijx [integer,public/optional/default=0]

• cdata/ijxb [integer,public/optional/default=0]

• cdata/ijxbtest [integer,public/optional/default=0]

• cdata/ijxbx [integer,public/optional/default=0]

• cdata/ijxby [integer,public/optional/default=0]

• cdata/ijxbz [integer,public/optional/default=0]

• cdata/ijxt [integer,public/optional/default=0]

• cdata/ijy [integer,public/optional/default=0]

• cdata/ijyt [integer,public/optional/default=0]

• cdata/ijz [integer,public/optional/default=0]

• cdata/ijzt [integer,public/optional/default=0]

• cdata/ikapparho [integer,public/optional/default=0]

• cdata/ikr_frad [integer,public/optional/default=0]

• cdata/ikr_fradx [integer,public/optional/default=0]

• cdata/ikr_frady [integer,public/optional/default=0]

• cdata/ikr_fradz [integer,public/optional/default=0]

• cdata/ilncc [integer,public/optional/default=0]

• cdata/ilndc (ndustspec) [integer,public/optional/default=0]

• cdata/ilndcj (ndustspec,ndustspec0) [integer,public/optional/default=0]

• cdata/ilnnd (ndustspec) [integer,public/optional/default=0]

• cdata/ilnrho [integer,public/optional/default=0]

• cdata/ilnrhon [integer,public/optional/default=0]

• cdata/ilntt [integer,public/optional/default=0]

• cdata/ilorentz [integer,public/optional/default=0]

• cdata/imd (ndustspec) [integer,public/optional/default=0]

• cdata/imi (ndustspec) [integer,public/optional/default=0]

• cdata/imixfrac [integer,public]

• cdata/imn [integer,public]

• cdata/imn_array (my,mz) [integer,public]

• cdata/ind (ndustspec) [integer,public/optional/default=0]

• cdata/inds_max_diags (*) [integer,public/allocatable]

• cdata/inds_sum_diags (*) [integer,public/allocatable]

• cdata/inetheat [integer,public/optional/default=0]

• cdata/init_loops [integer,public/optional/default=1]

• cdata/inucl [integer,public/optional/default=0]

• cdata/inucrate [integer,public/optional/default=0]

• cdata/inusmag [integer,public/optional/default=0]

• cdata/ioo [integer,public/optional/default=0]

• cdata/ioost [integer,public/optional/default=0]

• cdata/ioot [integer,public/optional/default=0]

• cdata/iox [integer,public/optional/default=0]

• cdata/ioxst [integer,public/optional/default=0]

• cdata/ioxt [integer,public/optional/default=0]

• cdata/ioy [integer,public/optional/default=0]

• cdata/ioyst [integer,public/optional/default=0]

• cdata/ioyt [integer,public/optional/default=0]

• cdata/ioz [integer,public/optional/default=0]

• cdata/iozst [integer,public/optional/default=0]

• cdata/iozt [integer,public/optional/default=0]

• cdata/ip [integer,public/optional/default=14]

  PAR_DOC: (anti-)verbosity level: code{ip=1} produces lots of

• cdata/ip11 [integer,public/optional/default=0]

• cdata/ip12 [integer,public/optional/default=0]

• cdata/ip13 [integer,public/optional/default=0]

• cdata/ip21 [integer,public/optional/default=0]

• cdata/ip22 [integer,public/optional/default=0]

• cdata/ip23 [integer,public/optional/default=0]

• cdata/ip31 [integer,public/optional/default=0]

• cdata/ip32 [integer,public/optional/default=0]

• cdata/ip33 [integer,public/optional/default=0]

• cdata/ipatch [integer,public/optional/default=0]

• cdata/ipencil_swap [integer,public/optional/default=0]

• cdata/iphiuu [integer,public/optional/default=0]

• cdata/ipoly [integer,public/optional/default=0]

• cdata/ipoly_fr [integer,public/optional/default=0]

• cdata/ipotself [integer,public/optional/default=0]

• cdata/ipp [integer,public]

• cdata/iproc [integer,public/optional/default=0]

• cdata/iproc_comm (26) [integer,public/optional/default=-1]

• cdata/iproc_p2 [integer,public/optional/default=0]

• cdata/iproc_pt [integer,public/optional/default=0]

• cdata/iproc_world [integer,public/optional/default=0]

• cdata/ipx [integer,public/optional/default=0]

• cdata/ipy [integer,public/optional/default=0]

• cdata/ipz [integer,public/optional/default=0]

• cdata/iqq [integer,public/optional/default=0]

• cdata/iqrad [integer,public/optional/default=0]

• cdata/iqx [integer,public/optional/default=0]

• cdata/iqy [integer,public/optional/default=0]

• cdata/iqz [integer,public/optional/default=0]

• cdata/ireset_tstart [integer,public/optional/default=2]

• cdata/irho [integer,public/optional/default=0]

• cdata/irho_b [integer,public/optional/default=0]

• cdata/irho_flucz [integer,public/optional/default=0]

• cdata/irhoe [integer,public/optional/default=0]

• cdata/irhon [integer,public/optional/default=0]

• cdata/irhs [integer,public/optional/default=0]

• cdata/irhsx [integer,public/optional/default=0]

• cdata/irhsy [integer,public/optional/default=0]

• cdata/irhsz [integer,public/optional/default=0]

• cdata/irr [integer,public/optional/default=0]

• cdata/isave [integer,public/optional/default=100]

• cdata/isaveglobal [integer,public/optional/default=0]

• cdata/isghtest [integer,public/optional/default=0]

• cdata/ishock [integer,public/optional/default=0]

• cdata/ishock_perp [integer,public/optional/default=0]

• cdata/isld_char [integer,public/optional/default=0]

• cdata/ismagorinsky [integer,public]

• cdata/ispecialvar [integer,public/optional/default=0]

• cdata/ispecialvar2 [integer,public/optional/default=0]

• cdata/ispx [integer,public/optional/default=0]

• cdata/ispy [integer,public/optional/default=0]

• cdata/ispz [integer,public/optional/default=0]

• cdata/israd [integer,public/optional/default=0]

• cdata/iss [integer,public/optional/default=0]

• cdata/iss_b [integer,public/optional/default=0]

  Anelastic auxiliary variables (base state)

• cdata/iss_flucz [integer,public/optional/default=0]

• cdata/iss_run_aver [integer,public/optional/default=0]

• cdata/issat [integer,public/optional/default=0]

• cdata/istress_ij [integer,public/optional/default=0]

• cdata/istresst [integer,public/optional/default=0]

• cdata/istresstim [integer,public/optional/default=0]

• cdata/istressx [integer,public/optional/default=0]

• cdata/istressxim [integer,public/optional/default=0]

• cdata/isupsat [integer,public/optional/default=0]

• cdata/it [integer,public/optional/default=0]

• cdata/it1 [integer,public/optional/default=10]

• cdata/it1d [integer,public/optional/default=impossible_int]

• cdata/it1start [integer,public/optional/default=0]

• cdata/it_rmv [integer,public/optional/default=0]

• cdata/it_timing [integer,public/optional/default=0]

• cdata/itauascalar [integer,public/optional/default=0]

• cdata/itdiagnos [integer,public]

• cdata/iterations [integer,public/optional/default=0]

• cdata/itorder [integer,public/optional/default=3]

• cdata/itsnap [integer,public/optional/default=impossible_int]

• cdata/itspec [integer,public/optional/default=impossible_int]

• cdata/itsub [integer,public/optional/default=0]

• cdata/itt [integer,public/optional/default=0]

• cdata/itt_flucz [integer,public/optional/default=0]

• cdata/ittc [integer,public/optional/default=0]

• cdata/ittold [integer,public/optional/default=0]

• cdata/itype_name (*) [integer,public/allocatable]

• cdata/itype_name_half (mname_half) [integer,public/optional/default=0]

• cdata/itype_name_z (*) [integer,public/allocatable]

• cdata/iu0x [integer,public/optional/default=0]

• cdata/iu0y [integer,public/optional/default=0]

• cdata/iu0z [integer,public/optional/default=0]

• cdata/iudx (ndustspec) [integer,public/optional/default=0]

• cdata/iudy (ndustspec) [integer,public/optional/default=0]

• cdata/iudz (ndustspec) [integer,public/optional/default=0]

• cdata/iug [integer,public/optional/default=0]

• cdata/iugb [integer,public/optional/default=0]

• cdata/iugbx [integer,public/optional/default=0]

• cdata/iugby [integer,public/optional/default=0]

• cdata/iugbz [integer,public/optional/default=0]

• cdata/iughtest [integer,public/optional/default=0]

• cdata/iugutest [integer,public/optional/default=0]

• cdata/iunx [integer,public/optional/default=0]

• cdata/iuny [integer,public/optional/default=0]

• cdata/iunz [integer,public/optional/default=0]

• cdata/iuu [integer,public/optional/default=0]

• cdata/iuu0 [integer,public/optional/default=0]

• cdata/iuu_fluc [integer,public/optional/default=0]

• cdata/iuu_flucx [integer,public/optional/default=0]

• cdata/iuu_flucy [integer,public/optional/default=0]

• cdata/iuu_flucz [integer,public/optional/default=0]

• cdata/iuu_sph [integer,public/optional/default=0]

• cdata/iuu_sphp [integer,public/optional/default=0]

• cdata/iuu_sphr [integer,public/optional/default=0]

• cdata/iuu_spht [integer,public/optional/default=0]

• cdata/iuud (ndustspec) [integer,public/optional/default=0]

• cdata/iuun [integer,public/optional/default=0]

• cdata/iuust [integer,public/optional/default=0]

• cdata/iuut [integer,public/optional/default=0]

• cdata/iuutest [integer,public/optional/default=0]

• cdata/iux [integer,public/optional/default=0]

• cdata/iuxb [integer,public/optional/default=0]

• cdata/iuxbtest [integer,public/optional/default=0]

• cdata/iuxbx [integer,public/optional/default=0]

• cdata/iuxby [integer,public/optional/default=0]

• cdata/iuxbz [integer,public/optional/default=0]

• cdata/iuxst [integer,public/optional/default=0]

• cdata/iuxt [integer,public/optional/default=0]

• cdata/iuy [integer,public/optional/default=0]

• cdata/iuyst [integer,public/optional/default=0]

• cdata/iuyt [integer,public/optional/default=0]

• cdata/iuz [integer,public/optional/default=0]

• cdata/iuzst [integer,public/optional/default=0]

• cdata/iuzt [integer,public/optional/default=0]

• cdata/iuztestpq [integer,public/optional/default=0]

• cdata/ivar_omit (2) [integer,public/optional/default=(/0,0/)]

• cdata/ivisc_forc [integer,public/optional/default=0]

• cdata/ivisc_forcx [integer,public/optional/default=0]

• cdata/ivisc_forcy [integer,public/optional/default=0]

• cdata/ivisc_forcz [integer,public/optional/default=0]

• cdata/ivisc_heat [integer,public/optional/default=0]

• cdata/iviscosity [integer,public/optional/default=0]

• cdata/ivv [integer,public/optional/default=0]

• cdata/ivx [integer,public/optional/default=0]

• cdata/ivy [integer,public/optional/default=0]

• cdata/ivz [integer,public/optional/default=0]

• cdata/iwig [integer,public/optional/default=0]

• cdata/iww [integer,public/optional/default=0]

• cdata/iww1 [integer,public/optional/default=0]

• cdata/iww2 [integer,public/optional/default=0]

• cdata/iww3 [integer,public/optional/default=0]

• cdata/ix [integer,public/optional/default=-1]

• cdata/ix_loc [integer,public/optional/default=1]

• cdata/iy [integer,public/optional/default=-1]

• cdata/iy2 [integer,public/optional/default=-1]

• cdata/iy2_loc [integer,public/optional/default=1]

• cdata/iy_loc [integer,public/optional/default=1]

• cdata/iyh [integer,public/optional/default=0]

• cdata/iyinyang_intpol_type [integer,public/optional/default=bilin]

• cdata/iz [integer,public/optional/default=-1]

• cdata/iz2 [integer,public/optional/default=-1]

• cdata/iz2_loc [integer,public/optional/default=1]

• cdata/iz3 [integer,public/optional/default=-1]

• cdata/iz3_loc [integer,public/optional/default=1]

• cdata/iz4 [integer,public/optional/default=-1]

  MR: dangerous names ix -> ix_slice

• cdata/iz4_loc [integer,public/optional/default=1]

• cdata/iz_loc [integer,public/optional/default=1]

• cdata/j_spec [logical,public/optional/default=.false.]

• cdata/ja_spec [logical,public/optional/default=.false.]

• cdata/jb_polar [logical,public/optional/default=.false.]

• cdata/jb_spec [logical,public/optional/default=.false.]

• cdata/jj2_spec [logical,public/optional/default=.false.]

• cdata/jj_fft3d [logical,public/optional/default=.false.]

• cdata/jj_kx0z [logical,public/optional/default=.false.]

• cdata/jj_xkyz [logical,public/optional/default=.false.]

• cdata/jxbxy_spec [logical,public/optional/default=.false.]

• cdata/k_b [real,public]

• cdata/k_b_set [real,public/optional/default=1.0]

• cdata/kappa_es [real,public]

• cdata/kinflow [character,public/optional/default='']

• cdata/km0em [real,public/optional/default=0.0]

• cdata/km1em [real,public/optional/default=0.0]

• cdata/kx_kinflow [real,public/optional/default=1.0]

• cdata/kx_nyq [real,public]

• cdata/ky_kinflow [real,public/optional/default=1.0]

• cdata/ky_nyq [real,public]

• cdata/kz_kinflow [real,public/optional/default=1.0]

• cdata/kz_nyq [real,public]

• cdata/l1davg [logical,public/optional/default=.false.]

• cdata/l1davg_save [logical,public]

• cdata/l1davgfirst [logical,public/optional/default=.false.]

• cdata/l1davgfirst_save [logical,public]

• cdata/l1dphiavg [logical,public/optional/default=.false.]

• cdata/l1dphiavg_save [logical,public]

• cdata/l2 [integer,public/optional/default=mx-nghost]

• cdata/l2davg [logical,public/optional/default=.false.]

• cdata/l2davg_save [logical,public]

• cdata/l2davgfirst [logical,public/optional/default=.false.]

• cdata/l2davgfirst_save [logical,public]

• cdata/l2i [integer,public/optional/default=mx-2*nghost+1]

• cdata/ladv_der_as_aux [logical,public/optional/default=.false.]

• cdata/lall_onesided [logical,public/optional/default=.false.]

• cdata/lalpm [logical,public/optional/default=.false.]

• cdata/lalpm_alternate [logical,public/optional/default=.false.]

• cdata/lambda5 [real,public/optional/default=0.0]

• cdata/lappend_pc_constants [logical,public/optional/default=.false.]

  PAR_DOC: always append when true to preserve history

• cdata/lastaroth_output [logical,public/optional/default=.false.]

• cdata/lav_smallx [logical,public/optional/default=.false.]

• cdata/lbackup_snap [logical,public/optional/default=.false.]

• cdata/lbaryons [logical,public/optional/default=.true.]

  PAR_DOC: interpret rho as the baryon velocity; it affects vA2 pencil.

• cdata/lbidiagonal_derij [logical,public/optional/default=.true.]

• cdata/lborder_hyper_diff [logical,public/optional/default=.true.]

• cdata/lcaproot [logical,public/optional/default=.false.]

• cdata/lcart_equi [logical,public/optional/default=.true.]

• cdata/lcartesian_coords [logical,public/optional/default=.true.]

• cdata/lchemistry_diag_save [logical,public]

• cdata/lchemonly [logical,public/optional/default=.false.]

• cdata/lcoarse [logical,public/optional/default=.false.]

• cdata/lcoarse_mn [logical,public/optional/default=.false.]

• cdata/lconcurrent [logical,public/optional/default=.true.]

• cdata/lcooling_ss_mz [logical,public/optional/default=.false.]

• cdata/lcopysnapshots_exp [logical,public/optional/default=.false.]

• cdata/lcorotational_frame [logical,public/optional/default=.false.]

• cdata/lcubed_sphere [logical,public/optional/default=.false.]

• cdata/lcutoff_corners [logical,public/optional/default=.false.]

• cdata/lcylinder_in_a_box [logical,public/optional/default=.false.]

• cdata/lcylindrical_coords [logical,public/optional/default=.false.]

• cdata/lcylindrical_gravity [logical,public/optional/default=.false.]

• cdata/ldcore [logical,public/optional/default=.false.]

• cdata/ldebug [logical,public/optional/default=.false.]

• cdata/ldensity_linearstart [logical,public/optional/default=.false.]

• cdata/ldensity_nolog [logical,public/optional/default=.false.]

• cdata/ldiagnos [logical,public/optional/default=.false.]

• cdata/ldiagnos_need_zaverages [logical,public/optional/default=.false.]

• cdata/ldiagnos_save [logical,public]

• cdata/ldiagnostic_output [logical,public/optional/default=.false.]

• cdata/ldirect_access [logical,public/optional/default=.false.]

• cdata/ldisp_current [logical,public/optional/default=.false.]

• cdata/ldistribute_persist [logical,public/optional/default=.false.]

• cdata/ldivu_perp [logical,public/optional/default=.false.]

• cdata/ldownsampl [logical,public/optional/default=.false.]

• cdata/ldownsampling [logical,public/optional/default=.false.]

• cdata/ldt [logical,public/optional/default=.true.]

• cdata/ldt_paronly [logical,public/optional/default=.false.]

• cdata/ldustdensity_log [logical,public/optional/default=.false.]

• cdata/ldynamical_diffusion [logical,public/optional/default=.false.]

• cdata/ldyndiff_useumax [logical,public/optional/default=.true.]

• cdata/lemergency_brake [logical,public/optional/default=.false.]

• cdata/lenforce_maux_check [logical,public/optional/default=.true.]

• cdata/leps_fixed [logical,public/optional/default=.true.]

• cdata/lequatory [logical,public]

• cdata/lequatorz [logical,public]

• cdata/lequidist (3) [logical,public/optional/default=.true.]

  grid equidistant in every direction

• cdata/lfargo_advection [logical,public/optional/default=.false.]

• cdata/lfatal_num_vector_369 [logical,public/optional/default=.true.]

• cdata/lfft [logical,public/optional/default=.true.]

• cdata/lfirst [logical,public/optional/default=.false.]

• cdata/lfirst_proc_x [logical,public/optional/default=.true.]

• cdata/lfirst_proc_xy [logical,public/optional/default=.true.]

• cdata/lfirst_proc_xyz [logical,public/optional/default=.true.]

• cdata/lfirst_proc_xz [logical,public/optional/default=.true.]

• cdata/lfirst_proc_y [logical,public/optional/default=.true.]

• cdata/lfirst_proc_yz [logical,public/optional/default=.true.]

• cdata/lfirst_proc_z [logical,public/optional/default=.true.]

• cdata/lfirstpoint [logical,public/optional/default=.false.]

• cdata/lfix_unit_std [logical,public/optional/default=.false.]

• cdata/lfixed_points [logical,public/optional/default=.false.]

• cdata/lfold_df [logical,public/optional/default=.false.]

• cdata/lfold_df_3points [logical,public/optional/default=.false.]

• cdata/lforcing_cont [logical,public/optional/default=.false.]

• cdata/lforeign [logical,public/optional/default=.false.]

• cdata/lforeign_comm_nblckg [logical,public/optional/default=.false.]

• cdata/lformat [logical,public/optional/default=.false.]

• cdata/lfractional_tstep_advance [logical,public/optional/default=.false.]

• cdata/lfractional_tstep_negative [logical,public/optional/default=.true.]

• cdata/lfreeze_varext (mcom) [logical,public/optional/default=.false.]

• cdata/lfreeze_varint (mcom) [logical,public/optional/default=.false.]

• cdata/lfreeze_varsquare (mcom) [logical,public/optional/default=.false.]

• cdata/lfrozen_bcs_x [logical,public/optional/default=.false.]

• cdata/lfrozen_bcs_y [logical,public/optional/default=.false.]

• cdata/lfrozen_bcs_z [logical,public/optional/default=.false.]

• cdata/lfrozen_bot_var_x (mcom) [logical,public/optional/default=.false.]

• cdata/lfrozen_bot_var_y (mcom) [logical,public/optional/default=.false.]

• cdata/lfrozen_bot_var_z (mcom) [logical,public/optional/default=.false.]

• cdata/lfrozen_top_var_x (mcom) [logical,public/optional/default=.false.]

• cdata/lfrozen_top_var_y (mcom) [logical,public/optional/default=.false.]

• cdata/lfrozen_top_var_z (mcom) [logical,public/optional/default=.false.]

• cdata/lfullvar_in_slices [logical,public/optional/default=.false.]

• cdata/lghostfold_usebspline [logical,public/optional/default=.false.]

• cdata/lglob [integer,public/optional/default=1]

• cdata/lgravr [logical,public/optional/default=.false.]

• cdata/lgravx [logical,public/optional/default=.false.]

• cdata/lgravx_dust [logical,public/optional/default=.true.]

• cdata/lgravx_gas [logical,public/optional/default=.true.]

• cdata/lgravy [logical,public/optional/default=.false.]

• cdata/lgravy_dust [logical,public/optional/default=.true.]

• cdata/lgravy_gas [logical,public/optional/default=.true.]

• cdata/lgravz [logical,public/optional/default=.false.]

• cdata/lgravz_dust [logical,public/optional/default=.true.]

• cdata/lgravz_gas [logical,public/optional/default=.true.]

• cdata/lignore_nonequi [logical,public/optional/default=.false.]

• cdata/lini_t_eq_zero [logical,public/optional/default=.false.]

• cdata/lini_t_eq_zero_once [logical,public/optional/default=.false.]

• cdata/linterpol_on_repair [logical,public/optional/default=.false.]

• cdata/lisotropic_advection [logical,public/optional/default=.false.]

• cdata/lit1_logspacing [logical,public/optional/default=.false.]

• cdata/lkinflow_as_aux [logical,public/optional/default=.false.]

• cdata/lklein_gordon [logical,public/optional/default=.false.]

• cdata/llast [logical,public/optional/default=.false.]

• cdata/llast_proc_x [logical,public/optional/default=.true.]

• cdata/llast_proc_xy [logical,public/optional/default=.true.]

• cdata/llast_proc_xyz [logical,public/optional/default=.true.]

• cdata/llast_proc_xz [logical,public/optional/default=.true.]

• cdata/llast_proc_y [logical,public/optional/default=.true.]

• cdata/llast_proc_yz [logical,public/optional/default=.true.]

• cdata/llast_proc_z [logical,public/optional/default=.true.]

• cdata/llocal_iso [logical,public/optional/default=.false.]

• cdata/llsode [logical,public/optional/default=.false.]

• cdata/lmaxadvec_sum [logical,public/optional/default=.false.]

• cdata/lmaximal_cdt [logical,public/optional/default=.false.]

• cdata/lmaximal_cdtv [logical,public/optional/default=.false.]

• cdata/lmdvar [logical,public/optional/default=.false.]

• cdata/lmeridional_border_drive [logical,public/optional/default=.false.]

• cdata/lmodify [logical,public/optional/default=.false.]

• cdata/lmonolithic_io [logical,public/optional/default=.false.]

• cdata/lmorton_curve [logical,public/optional/default=.false.]

• cdata/lmultithread [logical,public/optional/default=.false.]

• cdata/lnamelist_error [logical,public/optional/default=.false.]

• cdata/lncc_pdf [logical,public/optional/default=.false.]

• cdata/lneutraldensity_nolog [logical,public/optional/default=.false.]

• cdata/lngcc_pdf [logical,public/optional/default=.false.]

• cdata/lnoghost_strati [logical,public/optional/default=.false.]

• cdata/lnorth_pole [logical,public/optional/default=.false.]

• cdata/lnowrite [logical,public/optional/default=.false.]

  PAR_DOC: if set code{T}, all initialization files

• cdata/lnrho_pdf [logical,public/optional/default=.false.]

• cdata/lnspecial_pdf [logical,public/optional/default=.false.]

• cdata/lode [logical,public/optional/default=.false.]

• cdata/lomit_add_data [logical,public/optional/default=.false.]

• cdata/lor_spec [logical,public/optional/default=.false.]

• cdata/lout [logical,public/optional/default=.false.]

• cdata/lout_save [logical,public]

• cdata/lout_sound [logical,public/optional/default=.false.]

• cdata/lout_sound_save [logical,public]

• cdata/loutput_varn_at_exact_tsnap [logical,public/optional/default=.false.]

• cdata/loutside_avg [logical,public/optional/default=.false.]

• cdata/lparam_nml [logical,public/optional/default=.false.]

• cdata/lpdfb [logical,public/optional/default=.false.]

• cdata/lpdfu [logical,public/optional/default=.false.]

• cdata/lpdfz1 [logical,public/optional/default=.false.]

• cdata/lpdfz2 [logical,public/optional/default=.false.]

• cdata/lpenc_diagnos (npencils) [logical,public/optional/default=.false.]

• cdata/lpenc_diagnos2d (npencils) [logical,public/optional/default=.false.]

• cdata/lpenc_requested (npencils) [logical,public/optional/default=.false.]

• cdata/lpenc_video (npencils) [logical,public/optional/default=.false.]

• cdata/lpencil (npencils) [logical,public/optional/default=.false.]

• cdata/lpencil_check [logical,public/optional/default=.false.]

• cdata/lpencil_check_at_work [logical,public/optional/default=.false.]

• cdata/lpencil_check_diagnos_opti [logical,public/optional/default=.false.]

• cdata/lpencil_check_no_zeros [logical,public/optional/default=.true.]

• cdata/lpencil_check_small [logical,public/optional/default=.true.]

• cdata/lpencil_diagnos_swap [logical,public/optional/default=.false.]

• cdata/lpencil_init [logical,public/optional/default=.false.]

• cdata/lpencil_requested_swap [logical,public/optional/default=.true.]

• cdata/lpencil_save (npencils) [logical,public/optional/default=.false.]

• cdata/lperi (3) [logical,public/optional/default=.true.]

  PAR_DOC: vector of the form ($x$,$y$,$z$);

• cdata/lpersist [logical,public/optional/default=.true.]

• cdata/lpersistent_it [logical,public/optional/default=.false.]

• cdata/lphase [logical,public/optional/default=.false.]

• cdata/lpipe_coords [logical,public/optional/default=.false.]

• cdata/lpoint [integer,public/optional/default=(mx+1)/2]

• cdata/lpoint2 [integer,public/optional/default=(mx+1)/4]

• cdata/lpole (3) [logical,public/optional/default=.false.]

  in spherical coords: pole excluded

• cdata/lproc_p2 [logical,public/optional/default=.false.]

• cdata/lproc_print [logical,public/optional/default=.true.]

• cdata/lproc_pt [logical,public/optional/default=.false.]

• cdata/lprocz_slowest [logical,public/optional/default=.true.]

  PAR_DOC: if set to code{F}, the ordering

• cdata/lproper_averages [logical,public/optional/default=.false.]

• cdata/lpscalar_nolog [logical,public/optional/default=.false.]

• cdata/lr_spec [logical,public/optional/default=.false.]

• cdata/lread_aux [logical,public/optional/default=.false.]

  PAR_DOC: This controls whether auxiliary variables

• cdata/lread_from_other_prec [logical,public/optional/default=.false.]

  works so far only with io_dist!

• cdata/lread_global [logical,public/optional/default=.true.]

• cdata/lread_less [logical,public/optional/default=.false.]

• cdata/lread_nogrid [logical,public/optional/default=.false.]

• cdata/lread_oldsnap [logical,public/optional/default=.false.]

  PAR_DOC: if set code{T}, the old snapshot

• cdata/lread_oldsnap_lnrho2rho [logical,public/optional/default=.false.]

• cdata/lread_oldsnap_mskipvar [logical,public/optional/default=.false.]

• cdata/lread_oldsnap_nocoolprof [logical,public/optional/default=.false.]

• cdata/lread_oldsnap_nohydro [logical,public/optional/default=.false.]

• cdata/lread_oldsnap_nohydro_efield [logical,public/optional/default=.false.]

• cdata/lread_oldsnap_nohydro_ekfield [logical,public/optional/default=.false.]

• cdata/lread_oldsnap_nohydro_nomu5 [logical,public/optional/default=.false.]

• cdata/lread_oldsnap_noisothmhd [logical,public/optional/default=.false.]

• cdata/lread_oldsnap_nomag [logical,public/optional/default=.false.]

  PAR_DOC: if set code{T}, the

• cdata/lread_oldsnap_nopscalar [logical,public/optional/default=.false.]

  PAR_DOC: if set code{T}, the old

• cdata/lread_oldsnap_noshear [logical,public/optional/default=.false.]

• cdata/lread_oldsnap_nosink [logical,public/optional/default=.false.]

• cdata/lread_oldsnap_notestfield [logical,public/optional/default=.false.]

• cdata/lread_oldsnap_notestflow [logical,public/optional/default=.false.]

• cdata/lread_oldsnap_notestscalar [logical,public/optional/default=.false.]

• cdata/lread_oldsnap_onlya [logical,public/optional/default=.false.]

• cdata/lread_oldsnap_rho2lnrho [logical,public/optional/default=.false.]

• cdata/lread_scl_factor_file [logical,public/optional/default=.false.]

• cdata/lread_scl_factor_file_new [logical,public/optional/default=.false.]

• cdata/lreference_state [logical,public/optional/default=.false.]

• cdata/lreiterate [logical,public/optional/default=.true.]

• cdata/lreloading [logical,public/optional/default=.false.]

• cdata/lrepair_snap [logical,public/optional/default=.false.]

• cdata/lreport_undefined_diagnostics [logical,public/optional/default=.true.]

• cdata/lrescaling_magnetic [logical,public/optional/default=.false.]

• cdata/lrescaling_testfield [logical,public/optional/default=.false.]

• cdata/lrescaling_testscalar [logical,public/optional/default=.false.]

• cdata/lreset_boundary_values [logical,public/optional/default=.false.]

• cdata/lreset_seed [logical,public/optional/default=.false.]

• cdata/lrhs_test_at_work [logical,public/optional/default=.false.]

• cdata/lrmv [logical,public/optional/default=.false.]

• cdata/lrmwig_full [logical,public/optional/default=.false.]

• cdata/lrmwig_rho [logical,public/optional/default=.false.]

• cdata/lrmwig_xyaverage [logical,public/optional/default=.false.]

• cdata/lroot [logical,public/optional/default=.true.]

• cdata/lrotation [logical,public/optional/default=.false.]

• cdata/lrun [logical,public/optional/default=.false.]

• cdata/lsave [logical,public/optional/default=.false.]

• cdata/lseed_global [logical,public/optional/default=.true.]

• cdata/lseed_procdependent [logical,public/optional/default=.false.]

• cdata/lseparate_persist [logical,public/optional/default=.false.]

• cdata/lserial_io [logical,public/optional/default=.false.]

• cdata/lsfb [logical,public/optional/default=.false.]

• cdata/lsfflux [logical,public/optional/default=.false.]

• cdata/lsfu [logical,public/optional/default=.false.]

• cdata/lsfz1 [logical,public/optional/default=.false.]

• cdata/lsfz2 [logical,public/optional/default=.false.]

• cdata/lshift_datacube_x [logical,public/optional/default=.false.]

• cdata/lshift_origin (3) [logical,public/optional/default=.false.]

  PAR_DOC: if set code{T} for any or some of the three directions,

• cdata/lshift_origin_lower (3) [logical,public/optional/default=.false.]

  PAR_DOC: same as above, but downward.

• cdata/lshock_heat [logical,public/optional/default=.true.]

• cdata/lslope_limit_diff [logical,public/optional/default=.false.]

• cdata/lsmooth_farray [logical,public/optional/default=.false.]

• cdata/lsnap [logical,public/optional/default=.false.]

• cdata/lsnap_down [logical,public/optional/default=.false.]

• cdata/lsnap_tcrit [logical,public/optional/default=.false.]

  PAR_DOC: allow setting critical time for switching to log interval for dsnap.

• cdata/lsouth_pole [logical,public/optional/default=.false.]

• cdata/lspec [logical,public/optional/default=.false.]

• cdata/lspec_at_tplusdt [logical,public/optional/default=.false.]

• cdata/lspec_start [logical,public/optional/default=.false.]

• cdata/lspec_tcrit [logical,public/optional/default=.false.]

  PAR_DOC: allow setting critical time for switching to log interval for dspec.

• cdata/lspecial_substepped (100) [logical,public/optional/default=.false.]

• cdata/lsphere_in_a_box [logical,public/optional/default=.false.]

• cdata/lspherical_coords [logical,public/optional/default=.false.]

• cdata/lsplit_second [logical,public/optional/default=.false.]

• cdata/lstart [logical,public/optional/default=.false.]

• cdata/lstep1 [logical,public/optional/default=.true.]

• cdata/lstop_on_ioerror [logical,public/optional/default=.true.]

• cdata/lstratz [logical,public/optional/default=.false.]

• cdata/lsubstepping_in_time [logical,public/optional/default=.false.]

• cdata/lsubstract_reference_state [logical,public/optional/default=.false.]

• cdata/lsuppress_parallel_reductions [logical,public/optional/default=.false.]

• cdata/lswap_init_lnrho_uu [logical,public/optional/default=.false.]

• cdata/lsymmgrid (3) [logical,public/optional/default=.true.]

• cdata/ltec [logical,public/optional/default=.false.]

• cdata/ltemperature_nolog [logical,public/optional/default=.false.]

• cdata/ltestperturb [logical,public/optional/default=.false.]

• cdata/ltime_integrals [logical,public/optional/default=.false.]

• cdata/ltimestep_diagnostics [logical,public/optional/default=.false.]

• cdata/ltiming_io [logical,public/optional/default=.false.]

• cdata/ltolerate_namelist_errors [logical,public/optional/default=.false.]

• cdata/ltracers [logical,public/optional/default=.false.]

• cdata/luniform_z_mesh_aspect_ratio [logical,public/optional/default=.false.]

• cdata/lupdate_courant_dt [logical,public/optional/default=.false.]

• cdata/lupdate_cvs [logical,public/optional/default=.false.]

• cdata/luse_latitude [logical,public/optional/default=.false.]

• cdata/luse_oldgrid [logical,public/optional/default=.true.]

• cdata/luse_xyz1 [logical,public/optional/default=.false.]

• cdata/lvid_tcrit [logical,public/optional/default=.false.]

  PAR_DOC: allow setting critical time for switching to log interval for dvid.

• cdata/lvideo [logical,public/optional/default=.false.]

• cdata/lvideo_save [logical,public]

• cdata/lvisc_smag [logical,public/optional/default=.false.]

• cdata/lweno_transport [logical,public/optional/default=.false.]

• cdata/lwrite_1daverages [logical,public/optional/default=.false.]

• cdata/lwrite_2d [logical,public/optional/default=.false.]

  PAR_DOC: if set code{T}, only 2D-snapshots are

• cdata/lwrite_2daverages [logical,public/optional/default=.false.]

• cdata/lwrite_aux [logical,public/optional/default=.false.]

  PAR_DOC: if set code{T}, write auxiliary

• cdata/lwrite_avg1d_binary [logical,public/optional/default=.false.]

• cdata/lwrite_dim_again [logical,public/optional/default=.true.]

• cdata/lwrite_dvar [logical,public/optional/default=.false.]

• cdata/lwrite_fixed_points [logical,public/optional/default=.false.]

• cdata/lwrite_fsum [logical,public/optional/default=.false.]

• cdata/lwrite_ic [logical,public/optional/default=.true.]

  PAR_DOC: if set code{T}, the initial data are

• cdata/lwrite_last_powersnap [logical,public/optional/default=.false.]

• cdata/lwrite_phiaverages [logical,public/optional/default=.false.]

• cdata/lwrite_phizaverages [logical,public/optional/default=.false.]

• cdata/lwrite_prof [logical,public/optional/default=.true.]

• cdata/lwrite_slice_r [logical,public/optional/default=.false.]

• cdata/lwrite_slice_xy [logical,public/optional/default=.false.]

• cdata/lwrite_slice_xy2 [logical,public/optional/default=.false.]

• cdata/lwrite_slice_xy3 [logical,public/optional/default=.false.]

• cdata/lwrite_slice_xy4 [logical,public/optional/default=.false.]

• cdata/lwrite_slice_xz [logical,public/optional/default=.false.]

• cdata/lwrite_slice_xz2 [logical,public/optional/default=.false.]

• cdata/lwrite_slice_yz [logical,public/optional/default=.false.]

• cdata/lwrite_slices [logical,public/optional/default=.false.]

• cdata/lwrite_sound [logical,public/optional/default=.false.]

• cdata/lwrite_tracers [logical,public/optional/default=.false.]

• cdata/lwrite_ts_hdf5 [logical,public/optional/default=.true.]

• cdata/lwrite_var_anyway [logical,public/optional/default=.false.]

• cdata/lwrite_xyaverages [logical,public/optional/default=.false.]

• cdata/lwrite_xzaverages [logical,public/optional/default=.false.]

• cdata/lwrite_yaverages [logical,public/optional/default=.false.]

• cdata/lwrite_yzaverages [logical,public/optional/default=.false.]

• cdata/lwrite_zaverages [logical,public/optional/default=.false.]

• cdata/lx [real,public]

• cdata/lxyz (3) [real,public/optional/default=impossible]

  PAR_DOC: vector of the form ($x$, $y$, $z$);

• cdata/lxyz_loc (3) [real,public]

• cdata/ly [real,public]

• cdata/lyang [logical,public/optional/default=.false.]

• cdata/lyinyang [logical,public/optional/default=.false.]

• cdata/lz [real,public]

• cdata/lzaver_on_input [logical,public/optional/default=.false.]

• cdata/lzorder [logical,public/optional/default=.false.]

• cdata/m [integer,public/target]

• cdata/m2 [integer,public/optional/default=my-nghost]

• cdata/m2i [integer,public/optional/default=my-2*nghost+1]

• cdata/m_e [real,public]

• cdata/m_h [real,public]

• cdata/m_he [real,public]

• cdata/m_p [real,public]

• cdata/m_u [real,public]

• cdata/m_u_set [real,public/optional/default=1.0]

• cdata/mag_phispec [logical,public/optional/default=.false.]

• cdata/mag_spec [logical,public/optional/default=.false.]

• cdata/mailaddress [character,public/optional/default='']

• cdata/mailcmd [character,public/optional/default='']

• cdata/maux_down [integer,public/optional/default=-1]

• cdata/maux_vtxbuf_index (mfarray) [integer,public/optional/default=-1]

• cdata/max_walltime [real,public/optional/default=0.0]

  in seconds

• cdata/maxadvec (nx) [real,public/optional/default=0.]

• cdata/maxdiffus (nx) [real,public/optional/default=0.]

• cdata/maxdiffus2 (nx) [real,public/optional/default=0.]

• cdata/maxdiffus3 (nx) [real,public/optional/default=0.]

• cdata/maxsrc (nx) [real,public/optional/default=0.]

• cdata/mexts (2) [integer,public/optional/default=(/-1,-1/)]

• cdata/mm (ny * nz) [integer,public]

• cdata/modify_filename [character,public/optional/default='modify.dat']

• cdata/mpoint [integer,public/optional/default=(my+1)/2]

• cdata/mpoint2 [integer,public/optional/default=(my+1)/4]

• cdata/mskipvar [integer,public/optional/default=0]

• cdata/mu0 [real,public/optional/default=1.0]

• cdata/mu01 [real,public/optional/default=0.0]

  magnetic permeability [should be in Magnetic]

• cdata/mu_spec [logical,public/optional/default=.false.]

• cdata/mvar_down [integer,public/optional/default=-1]

• cdata/mvar_io [integer,public/optional/default=0]

• cdata/n [integer,public/target]

• cdata/n2 [integer,public/optional/default=mz-nghost]

• cdata/n2i [integer,public/optional/default=mz-2*nghost+1]

• cdata/n_odevars [integer,public/optional/default=0]

• cdata/name_half_max [integer,public/optional/default=0]

• cdata/naux [integer,public]

• cdata/naux_com [integer,public]

• cdata/ncoarse [integer,public/optional/default=0]

• cdata/nconformal [real,public/optional/default=1.5]

• cdata/ncoords_sound [integer,public/optional/default=0]

• cdata/ncountsz (*,*) [integer,public/target/allocatable]

• cdata/nd_spec [logical,public/optional/default=.false.]

• cdata/ndown (3) [integer,public/optional/default=0]

• cdata/necessary (ny * nz) [logical,public/optional/default=.false.]

• cdata/necessary_imn [integer,public/optional/default=0]

• cdata/neighbors (3,3,3) [integer,public/optional/default=0]

• cdata/nexts (*,*) [integer,public/allocatable]

• cdata/nfilter [integer,public/optional/default=0]

• cdata/nghost_read_fewer [integer,public/optional/default=0]

• cdata/nglobal [integer,public]

• cdata/ngrid_down (3) [integer,public]

• cdata/ninds (*,*,*) [integer,public/allocatable]

• cdata/nn (ny * nz) [integer,public]

• cdata/nname [integer,public/optional/default=0]

• cdata/nname_sound [integer,public/optional/default=0]

• cdata/nnamer [integer,public/optional/default=0]

• cdata/nnamerz [integer,public/optional/default=0]

• cdata/nnamev [integer,public/optional/default=0]

• cdata/nnamex [integer,public/optional/default=0]

• cdata/nnamexy [integer,public/optional/default=0]

• cdata/nnamexz [integer,public/optional/default=0]

• cdata/nnamey [integer,public/optional/default=0]

• cdata/nnamez [integer,public/optional/default=0]

• cdata/noghost_for_isave [logical,public/optional/default=.false.]

• cdata/np_ap_spec [logical,public/optional/default=.false.]

• cdata/np_spec [logical,public/optional/default=.false.]

• cdata/nph_rslice [integer,public/optional/default=min(nxgrid,nygrid,nzgrid)]

• cdata/nphis (*) [integer,public/allocatable]

• cdata/nphis1 (*) [real,public/allocatable]

• cdata/nphis2 (*) [real,public/allocatable]

• cdata/npoint [integer,public/optional/default=floor(((mz+1)/2.)+0.1)]

• cdata/npoint2 [integer,public/optional/default=floor(((mz+1)/4.)+0.1)]

• cdata/nproc_comm [integer,public/optional/default=0]

• cdata/nprocx_node [integer,public/optional/default=0]

• cdata/nprocy_node [integer,public/optional/default=0]

• cdata/nprocz_node [integer,public/optional/default=0]

• cdata/nr_directions [integer,public/optional/default=1]

• cdata/nscratch [integer,public]

• cdata/nseed [integer,public/optional/default=0]

• cdata/nsnap_backups [integer,public/optional/default=1]

• cdata/nt [integer,public/optional/default=10000000]

• cdata/ntestfield [integer,public/optional/default=0]

• cdata/ntestflow [integer,public/optional/default=0]

• cdata/ntestlnrho [integer,public/optional/default=0]

• cdata/ntestscalar [integer,public/optional/default=0]

• cdata/nth_rslice [integer,public/optional/default=floor((min(nxgrid,nygrid,nzgrid)/2.)+.1)]

• cdata/ntmax1dav [integer,public/optional/default=500]

• cdata/ntmax2dav [integer,public/optional/default=500]

• cdata/nu_sts [real,public/optional/default=0.1]

• cdata/num_after_timestep [integer,public/parameter/optional/default=5]

• cdata/num_helper_threads [integer,public/optional/default=1]

• cdata/num_substeps [integer,public/optional/default=3]

• cdata/number_of_substeps_per_timestep [integer,public/optional/default=0]

• cdata/nv1_capitalvar [integer,public/optional/default=1]

• cdata/nvar [integer,public]

• cdata/nvol [real,public]

• cdata/nvol1 [real,public]

  For calculating averages in non-Cartesian coordinates

• cdata/nycut [integer,public/optional/default=my]

• cdata/nzcut [integer,public/optional/default=mz]

• cdata/nzgrid_eff [integer,public/optional/default=nzgrid]

• cdata/offset_min_calc [real,public/optional/default=0.0]

  PAR_DOC: offset value for computing negative minima,

• cdata/old_cdtv [logical,public/optional/default=.false.]

• cdata/omega [real,public/optional/default=0.0]

• cdata/omega_corot [real,public/optional/default=0.0]

• cdata/omu_spec [logical,public/optional/default=.false.]

• cdata/oned [logical,public/optional/default=.false.]

• cdata/onedall [logical,public/optional/default=.false.]

• cdata/oo_fft3d [logical,public/optional/default=.false.]

• cdata/oo_kx0z [logical,public/optional/default=.false.]

• cdata/oo_spec [logical,public/optional/default=.false.]

• cdata/oo_xkyz [logical,public/optional/default=.false.]

• cdata/ou_kzspec [logical,public/optional/default=.false.]

• cdata/ou_omega [logical,public/optional/default=.false.]

• cdata/ou_phispec [logical,public/optional/default=.false.]

• cdata/ou_polar [logical,public/optional/default=.false.]

• cdata/ou_spec [logical,public/optional/default=.false.]

• cdata/oun_spec [logical,public/optional/default=.false.]

• cdata/ouout2_spec [logical,public/optional/default=.false.]

• cdata/ouout_polar [logical,public/optional/default=.false.]

• cdata/ouout_spec [logical,public/optional/default=.false.]

• cdata/out_spec [logical,public/optional/default=.false.]

• cdata/pdfs [character,public/optional/default='']

  used to calculate PDFs of any variables in the f-array. Example: pdfs=’ux,uy,lnrho’

• cdata/penc0 [real,public/optional/default=2.345678]

  `impossible’ value – must not be

• cdata/permute_sts [integer,public/optional/default=0]

• cdata/phi [real,public/optional/default=0.0]

• cdata/pipe_func [character,public/optional/default='error_function']

• cdata/poleneigh [integer,public]

  `pole’ processor neighbours

• cdata/pot_spec [logical,public/optional/default=.false.]

• cdata/pretend_lntt [logical,public/optional/default=.false.]

  PAR_DOC: index{pretend_lnTT}

• cdata/procx_bounds (1 + nprocx) [real,public]

• cdata/procy_bounds (1 + nprocy) [real,public]

• cdata/procz_bounds (1 + nprocz) [real,public]

• cdata/qshear [real,public/optional/default=0.0]

• cdata/r1_mn (nx) [real,public]

• cdata/r2_mn (nx) [real,public]

• cdata/r2_weight (nx) [real,public]

• cdata/r2u_spec [logical,public/optional/default=.false.]

• cdata/r3u_spec [logical,public/optional/default=.false.]

• cdata/r_ext [real,public/optional/default=impossible]

  for spherical shell problems

• cdata/r_ext_border [real,public/optional/default=impossible]

• cdata/r_int [real,public/optional/default=0.0]

• cdata/r_int_border [real,public/optional/default=impossible]

• cdata/r_mn (nx) [real,public]

• cdata/r_ref [real,public/optional/default=1.0]

• cdata/r_rslice [real,public/optional/default=0.0]

• cdata/radius_diag [real,public/optional/default=1.0]

• cdata/rbound [real,public/optional/default=1.0]

• cdata/rcorot [real,public/optional/default=1.0]

• cdata/rcyl (nrcyl) [real,public]

  used for phi-averages

• cdata/rcyl_mn (nx) [real,public/optional/default=1.]

• cdata/rcyl_mn1 (nx) [real,public/optional/default=1.]

• cdata/rcyl_mn2 (nx) [real,public/optional/default=1.]

• cdata/rcyl_weight (nx) [real,public]

• cdata/re_mesh [real,public/optional/default=0.5]

• cdata/reac_chem (nx) [real,public]

• cdata/reac_dust (nx) [real,public]

• cdata/reac_pchem [real,public]

• cdata/read_vtxbuf_from_gpu (mfarray) [integer,public/optional/default=0]

• cdata/rel_dang [real,public/optional/default=0.0]

• cdata/relvel_spec [logical,public/optional/default=.false.]

• cdata/rfreeze_ext [real,public/optional/default=-impossible]

• cdata/rfreeze_int [real,public/optional/default=-impossible]

• cdata/rhocc_pdf [logical,public/optional/default=.false.]

• cdata/rhop_spec [logical,public/optional/default=.false.]

• cdata/ro_spec [logical,public/optional/default=.false.]

• cdata/rsmooth [real,public/optional/default=0.0]

• cdata/saffman_aa [logical,public/optional/default=.false.]

• cdata/saffman_aa_c [logical,public/optional/default=.false.]

• cdata/saffman_bb [logical,public/optional/default=.false.]

• cdata/saffman_eem [logical,public/optional/default=.false.]

• cdata/saffman_eem_uc [logical,public/optional/default=.false.]

• cdata/saffman_mag [logical,public/optional/default=.false.]

• cdata/saffman_mag_c [logical,public/optional/default=.false.]

• cdata/saffman_mag_uc [logical,public/optional/default=.false.]

• cdata/saffman_ub [logical,public/optional/default=.false.]

• cdata/save_lastsnap [logical,public/optional/default=.true.]

• cdata/scl_factor_target [real,public]

• cdata/scl_factor_target_save [real,public]

• cdata/scl_spec [logical,public/optional/default=.false.]

• cdata/scl_spec_boost [logical,public/optional/default=.false.]

• cdata/seed (mseed) [integer,public/optional/default=0]

• cdata/seed0 [integer,public/optional/default=1812]

• cdata/seed2 (mseed) [integer,public/optional/default=0]

• cdata/shared_mem_name [character,public/optional/default='']

• cdata/sigma_thomson [real,public/optional/default=impossible]

• cdata/sigmah_ [real,public]

• cdata/sigmasb [real,public]

• cdata/sigmasb_set [real,public/optional/default=1.0]

• cdata/sin1th (my) [real,public]

• cdata/sin2th (my) [real,public]

• cdata/sinph (mz) [real,public]

• cdata/sinth (my) [real,public]

• cdata/sinth12 (my) [real,public]

  for slope-limted-diffusion

• cdata/sinth_weight (my) [real,public]

• cdata/sinth_weight_across_proc (nygrid) [real,public]

• cdata/slice_position [character,public/optional/default='p']

• cdata/sound_coords_list (*,*) [integer,public/allocatable]

• cdata/soundeps [real,public/optional/default=0.0001]

• cdata/sp_spec [logical,public/optional/default=.false.]

• cdata/special_module_index [integer,public/optional/default=1]

• cdata/special_pdf [logical,public/optional/default=.false.]

• cdata/sqrt_ascale [real,public/optional/default=1.0]

• cdata/ss_spec [logical,public/optional/default=.false.]

• cdata/sshear [real,public/optional/default=0.0]

• cdata/ssmask1 [real,public/optional/default=0.0]

• cdata/ssmask2 [real,public/optional/default=0.0]

• cdata/ssp_spec [logical,public/optional/default=.false.]

• cdata/sssp_spec [logical,public/optional/default=.false.]

• cdata/stg_spec [logical,public/optional/default=.false.]

• cdata/str_spec [logical,public/optional/default=.false.]

• cdata/stt_spec [logical,public/optional/default=.false.]

• cdata/stx_spec [logical,public/optional/default=.false.]

• cdata/submithost [character,public/optional/default='']

• cdata/t [real,public/optional/default=0.0]

• cdata/t1ddiagnos [real,public]

• cdata/t1ddiagnos_save [real,public]

• cdata/t2davgfirst [real,public]

• cdata/t2davgfirst_save [real,public]

• cdata/t_save [real,public]

• cdata/t_snap_save [real,public]

• cdata/tag_foreign [integer,public/optional/default=0]

• cdata/tanth (my) [real,public]

• cdata/tau_aver1 [real,public/optional/default=1.0]

• cdata/tavg [real,public/optional/default=0.0]

• cdata/tborder [real,public/optional/default=0.0]

• cdata/tdiagnos [real,public]

• cdata/test_nonblocking [logical,public/optional/default=.false.]

• cdata/tgw_spec [logical,public/optional/default=.false.]

• cdata/theta [real,public/optional/default=0.0]

• cdata/theta_lower_border [real,public/optional/default=impossible]

• cdata/theta_upper_border [real,public/optional/default=impossible]

• cdata/thetamin [real,public/optional/default=0.0]

• cdata/thread_id [integer,public/optional/default=1]

• cdata/timestep_scaling (mvar) [character,public/optional/default='rel_err']

• cdata/tmax [real,public/optional/default=1e+33]

• cdata/tmax_logspacing [real,public/optional/default=1.0]

• cdata/toutoff [real,public/optional/default=0.0]

• cdata/tphys [real,public/optional/default=0.0]

• cdata/tpq_spec [logical,public/optional/default=.false.]

• cdata/tra_spec [logical,public/optional/default=.false.]

• cdata/trans_delta (3) [real,public/optional/default=1.0]

• cdata/trans_width (3) [real,public/optional/default=1.0]

• cdata/trelax_poly [real,public]

• cdata/trigger_snap [character,public/optional/default='code_time']

  PAR_DOC: trigger quantity for snapshot output

• cdata/trigger_spec [character,public/optional/default='code_time']

  PAR_DOC: trigger quantity for spectral output

• cdata/trigger_vid [character,public/optional/default='code_time']

  PAR_DOC: trigger quantity for video output

• cdata/tslice [real,public]

• cdata/tslice_save [real,public]

• cdata/tsnap_crit_log_interval [real,public/optional/default=impossible]

  PAR_DOC: critical time above which we set dsnap to a negative value.

• cdata/tsound [real,public/optional/default=0.0]

• cdata/tsound_save [real,public]

• cdata/tspec [real,public]

• cdata/tspec_crit_log_interval [real,public/optional/default=impossible]

  PAR_DOC: critical time above which we set dspec to a negative value.

• cdata/tspec_save [real,public]

• cdata/tstart [real,public/optional/default=0.0]

• cdata/tt_spec [logical,public/optional/default=.false.]

• cdata/ttransient [real,public/optional/default=0.0]

• cdata/tvid_crit_log_interval [real,public/optional/default=impossible]

  PAR_DOC: critical time above which we set dvid to a negative value.

• cdata/twod [logical,public/optional/default=.false.]

• cdata/ub_spec [logical,public/optional/default=.false.]

• cdata/ucp_spec [logical,public/optional/default=.false.]

• cdata/ud_spec [logical,public/optional/default=.false.]

• cdata/udrift_bc [real,public/optional/default=0.0]

• cdata/unit_density [real,public/optional/default=impossible]

  PAR_DOC:

• cdata/unit_energy [real,public]

• cdata/unit_entropy [real,public/optional/default=impossible]

• cdata/unit_flux [real,public]

• cdata/unit_length [real,public/optional/default=impossible]

  PAR_DOC: allows you to set the

• cdata/unit_magnetic [real,public/optional/default=impossible]

• cdata/unit_mass [real,public]

• cdata/unit_pressure [real,public]

• cdata/unit_system [character,public/optional/default='cgs']

  PAR_DOC: you can set this character string to index{SI units}

• cdata/unit_temperature [real,public/optional/default=impossible]

  PAR_DOC:

• cdata/unit_time [real,public]

• cdata/unit_velocity [real,public/optional/default=impossible]

  PAR_DOC:

• cdata/uot_spec [logical,public/optional/default=.false.]

• cdata/updated_var_ranges (2,10) [integer,public/optional/default=0]

• cdata/uu_fft3d [logical,public/optional/default=.false.]

• cdata/uu_kx0z [logical,public/optional/default=.false.]

• cdata/uu_xkyz [logical,public/optional/default=.false.]

• cdata/uut_polar [logical,public/optional/default=.false.]

• cdata/uut_spec [logical,public/optional/default=.false.]

• cdata/ux_spec [logical,public/optional/default=.false.]

• cdata/uxj_phispec [logical,public/optional/default=.false.]

• cdata/uxj_spec [logical,public/optional/default=.false.]

• cdata/uxy_spec [logical,public/optional/default=.false.]

• cdata/uy_spec [logical,public/optional/default=.false.]

• cdata/uz_spec [logical,public/optional/default=.false.]

• cdata/uzs_spec [logical,public/optional/default=.false.]

• cdata/variable_substepped (mvar) [logical,public/optional/default=.false.]

• cdata/varname (mfarray) [character,public]

• cdata/vct_spec [logical,public/optional/default=.false.]

• cdata/vct_spec_boost [logical,public/optional/default=.false.]

• cdata/vec_phispec [logical,public/optional/default=.false.]

• cdata/vec_spec [logical,public/optional/default=.false.]

• cdata/vel_phispec [logical,public/optional/default=.false.]

• cdata/vel_spec [logical,public/optional/default=.false.]

• cdata/wav1 [real,public/optional/default=impossible]

• cdata/wav1z [real,public/optional/default=impossible]

• cdata/wborder [real,public/optional/default=0.0]

• cdata/wborder_ext [real,public/optional/default=0.0]

• cdata/wborder_int [real,public/optional/default=0.0]

• cdata/wborder_theta_lower [real,public/optional/default=0.0]

• cdata/wborder_theta_upper [real,public/optional/default=0.0]

• cdata/wfreeze [real,public/optional/default=0.0]

• cdata/wfreeze_ext [real,public/optional/default=0.0]

• cdata/wfreeze_int [real,public/optional/default=0.0]

• cdata/workdir [character,public/optional/default='./']

• cdata/wweos_target [real,public]

• cdata/x (mx) [real,public]

• cdata/x0 [real,public]

• cdata/x12 (mx) [real,public]

  for slope-limted-diffusion

• cdata/xav_max [real,public/optional/default=impossible]

• cdata/xbot_slice [real,public/optional/default=0.0]

• cdata/xfreeze_square [real,public/optional/default=impossible]

• cdata/xglobal (mxgrid) [real,public]

• cdata/xgrid (nxgrid) [real,public]

• cdata/xi_step_frac (3,2) [real,public/optional/default=1.0]

• cdata/xi_step_width (3,2) [real,public/optional/default=1.5]

• cdata/xlneigh [integer,public]

• cdata/xprim (mx) [real,public]

• cdata/xtop_slice [real,public/optional/default=1.0]

• cdata/xuneigh [integer,public]

• cdata/xy_spec [character,public/optional/default='']

• cdata/xy_specs (n_xy_specs_max) [character,public/optional/default='']

• cdata/xyz0 (3) [real,public/optional/default=-pi]

  PAR_DOC: vector of the form ($x$, $y$, $z$);

• cdata/xyz0_loc (3) [real,public]

• cdata/xyz1 (3) [real,public/optional/default=impossible]

• cdata/xyz1_loc (3) [real,public]

• cdata/xyz_star (3) [real,public/optional/default=0.0]

• cdata/xyz_step (3,2) [real,public/optional/default=1.0]

• cdata/xyz_units (3) [character,public/optional/default='one']

• cdata/y (my) [real,public]

• cdata/y0 [real,public]

• cdata/y12 (my) [real,public]

• cdata/ybot_slice [real,public/optional/default=0.0]

• cdata/yequator [real,public/optional/default=0.0]

• cdata/yfreeze_square [real,public/optional/default=impossible]

• cdata/yglobal (mygrid) [real,public]

• cdata/ygrid (nygrid) [real,public]

• cdata/ylneigh [integer,public]

• cdata/yprim (my) [real,public]

• cdata/ytop_slice [real,public/optional/default=1.0]

• cdata/yuneigh [integer,public]

• cdata/yy_biquad_weights (4) [real,public/optional/default=impossible]

• cdata/z (mz) [real,public]

• cdata/z0 [real,public]

• cdata/z12 (mz) [real,public]

  for slope-limted-diffusion

• cdata/zbot_slice [real,public/optional/default=0.0]

• cdata/zequator [real,public/optional/default=0.0]

• cdata/zeta_grid0 [real,public/optional/default=0.0]

• cdata/zglobal (mzgrid) [real,public]

• cdata/zgrid (nzgrid) [real,public]

• cdata/zlneigh [integer,public]

  `lower’ processor neighbours

• cdata/zprim (mz) [real,public]

• cdata/ztop_slice [real,public/optional/default=1.0]

• cdata/zuneigh [integer,public]

  `upper’ processor neighbours