Startup parameters for start.in
This page lists 5339 variables distributed into 188 files. Of these:
251 (4.7%) are documented;
4743 (89.3%) are undocumented;
345 (6.0%) could not be found (they appear in the namelist, but the declaration could not be found).
Module cdata.f90 / param_io.f90
The following variables are part of the init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
a0_spec |
logical |
.false. |
|
ab_phispec |
logical |
.false. |
|
ab_spec |
logical |
.false. |
|
allproc_print |
logical |
.true. |
|
astaroth_dest |
character(LEN=fnlen) |
‘’ |
|
azbz_spec |
logical |
.false. |
|
bb2_spec |
logical |
.false. |
|
bc_slc_dir |
character(LEN=fnlen) |
‘’ |
|
bcx |
character (len=2*bclen+1), dimension(mcom) |
‘p’ |
|
bcy |
character (len=2*bclen+1), dimension(mcom) |
‘p’ |
|
bcz |
character (len=2*bclen+1), dimension(mcom) |
‘p’ |
|
border_frac_r |
real, dimension(2) |
0.0 |
|
border_frac_x |
real, dimension(2) |
0.0 |
|
border_frac_y |
real, dimension(2) |
0.0 |
|
border_frac_z |
real, dimension(2) |
0.0 |
|
bxy_spec |
logical |
.false. |
|
c_light |
real(KIND=rkind8) |
||
c_light_set |
real(KIND=rkind8) |
1. |
|
cc_pdf |
logical |
.false. |
|
cc_spec |
logical |
.false. |
|
coeff_grid |
real, dimension(3) |
1.0 |
|
coord_system |
character (len=9) |
‘cartesian’ |
|
cosEB_pdf |
logical |
.false. |
|
cp_set |
real(KIND=rkind8) |
1. |
|
cr_spec |
logical |
.false. |
|
CrossSec_w |
real |
.1 |
|
CrossSec_x1 |
real |
-1. |
|
CrossSec_x2 |
real |
1. |
|
cvsid |
character (len=linelen) |
‘no cvsid is given in start.in or run.in!’ |
PAR_DOC: |
cyinyang_intpol_type |
character(LEN=labellen) |
‘bilinear’ |
|
density_scale_factor |
real |
||
der2_type |
character (len=labellen) |
‘standard’ |
|
dvid |
real |
0. |
PAR_DOC: save slice (video) files every dvid time units. |
dxi_fact |
real, dimension(3) |
1.0 |
|
ele_spec |
logical |
.false. |
|
EMF_spec |
logical |
.false. |
|
EP_spec |
logical |
.false. |
|
farray_smooth_width |
integer |
6 |
|
fbcx1 |
real, dimension(mcom) |
0. |
|
fbcx1_2 |
real, dimension(mcom) |
0. |
|
fbcx2 |
real, dimension(mcom) |
0. |
|
fbcx2_2 |
real, dimension(mcom) |
0. |
|
fbcx_bot |
real, dimension(mcom) |
0. |
|
fbcx_top |
real, dimension(mcom) |
0. |
|
fbcy1 |
real, dimension(mcom) |
0. |
|
fbcy1_1 |
real, dimension(mcom) |
0. |
|
fbcy1_2 |
real, dimension(mcom) |
0. |
|
fbcy2 |
real, dimension(mcom) |
0. |
|
fbcy2_1 |
real, dimension(mcom) |
0. |
|
fbcy2_2 |
real, dimension(mcom) |
0. |
|
fbcy_bot |
real, dimension(mcom) |
0. |
|
fbcy_top |
real, dimension(mcom) |
0. |
|
fbcz1 |
real, dimension(mcom) |
0. |
|
fbcz1_1 |
real, dimension(mcom) |
0. |
|
fbcz1_2 |
real, dimension(mcom) |
0. |
|
fbcz2 |
real, dimension(mcom) |
0. |
|
fbcz2_1 |
real, dimension(mcom) |
0. |
|
fbcz2_2 |
real, dimension(mcom) |
0. |
|
fbcz_bot |
real, dimension(mcom) |
0. |
|
fbcz_top |
real, dimension(mcom) |
0. |
|
FI_mixfrac_pdf2d |
logical |
.false. |
|
force_lower_bound |
character (len=labellen) |
‘’ |
|
force_upper_bound |
character (len=labellen) |
‘’ |
|
G_Newton |
real(KIND=rkind8) |
||
Gab_spec |
logical |
.false. |
|
Gan_spec |
logical |
.false. |
|
GBb_spec |
logical |
.false. |
|
gcc_pdf |
logical |
.false. |
|
glnCrossSec0 |
real |
0.0 |
|
gph_spec |
logical |
.false. |
|
grid_func |
character (len=labellen), dimension(3) |
‘linear’ |
|
GWd_spec |
logical |
.false. |
|
GWe_spec |
logical |
.false. |
|
GWf_spec |
logical |
.false. |
|
GWg_spec |
logical |
.false. |
|
GWh_spec |
logical |
.false. |
|
GWh_spec_boost |
logical |
.false. |
|
GWm_spec |
logical |
.false. |
|
GWs_spec |
logical |
.false. |
|
GWs_spec_boost |
logical |
.false. |
|
hbar |
real(KIND=rkind8) |
||
hEP_spec |
logical |
.false. |
|
ichannel1 |
integer |
1 |
|
ichannel2 |
integer |
1 |
|
init_loops |
integer |
1 |
|
ip |
integer, intent(IN) |
||
ireset_tstart |
integer |
2 |
|
isaveglobal |
integer |
0 |
|
jj2_spec |
logical |
.false. |
|
jxbxy_spec |
logical |
.false. |
|
k_B_set |
real(KIND=rkind8) |
1. |
|
lappend_pc_constants |
logical |
.false. |
PAR_DOC: always append when true to preserve history |
lastaroth_output |
logical |
.false. |
|
lav_smallx |
logical |
.false. |
|
lbaryons |
logical |
.true. |
PAR_DOC: interpret rho as the baryon velocity; it affects vA2 pencil. |
lborder_hyper_diff |
logical |
.true. |
|
lcopysnapshots_exp |
logical |
.false. |
|
lcorotational_frame |
logical |
.false. |
|
lcubed_sphere |
logical |
.false. |
|
lcutoff_corners |
logical |
.false. |
|
lcylinder_in_a_box |
logical |
.false. |
|
lcylindrical_gravity |
logical |
.false. |
|
ldirect_access |
logical |
.false. |
|
ldistribute_persist |
logical |
.false. |
|
ldivu_perp |
logical |
.false. |
|
lenforce_maux_check |
logical |
.true. |
|
lequatory |
logical |
||
lequatorz |
logical |
||
lequidist |
logical, dimension(3) |
.true. |
grid equidistant in every direction |
lfargo_advection |
logical |
.false. |
|
lfatal_num_vector_369 |
logical |
.true. |
|
lfix_unit_std |
logical |
.false. |
|
lforce_shear_bc |
logical |
.true. |
|
lghostfold_usebspline |
logical |
.false. |
|
lkinflow_as_aux |
logical |
.false. |
|
llocal_iso |
logical |
.false. |
|
lmodify |
logical |
.false. |
|
lmorton_curve |
logical |
.false. |
|
lncc_pdf |
logical |
.false. |
|
lngcc_pdf |
logical |
.false. |
|
lnoghost_strati |
logical |
.false. |
|
lnowrite |
logical |
.false. |
PAR_DOC: if set code{T}, all initialization files |
lomit_add_data |
logical |
.false. |
|
Lor_spec |
logical |
.false. |
|
lperi |
logical, dimension(3) |
.true. |
PAR_DOC: vector of the form ($x$,$y$,$z$); |
lpersist |
logical |
.true. |
|
lpoint |
integer |
(:f:var:`~cparam/mx`+1)/2 |
|
lpoint2 |
integer |
(:f:var:`~cparam/mx`+1)/4 |
|
lpole |
logical, dimension(3) |
.false. |
in spherical coords: pole excluded |
lprocz_slowest |
logical |
.true. |
PAR_DOC: if set to code{F}, the ordering |
lproper_averages |
logical |
.false. |
|
lr_spec |
logical |
.false. |
|
lread_aux |
logical |
.false. |
PAR_DOC: This controls whether auxiliary variables |
lread_from_other_prec |
logical |
.false. |
works so far only with io_dist! |
lread_oldsnap |
logical |
.false. |
PAR_DOC: if set code{T}, the old snapshot |
lread_oldsnap_nocoolprof |
logical |
.false. |
|
lread_oldsnap_nohydro |
logical |
.false. |
|
lread_oldsnap_nohydro_efield |
logical |
.false. |
|
lread_oldsnap_nohydro_ekfield |
logical |
.false. |
|
lread_oldsnap_nohydro_nomu5 |
logical |
.false. |
|
lread_oldsnap_noisothmhd |
logical |
.false. |
|
lread_oldsnap_nomag |
logical |
.false. |
PAR_DOC: if set code{T}, the |
lread_oldsnap_nopscalar |
logical |
.false. |
PAR_DOC: if set code{T}, the old |
lread_oldsnap_noshear |
logical |
.false. |
|
lread_oldsnap_notestfield |
logical |
.false. |
|
lread_oldsnap_notestflow |
logical |
.false. |
|
lread_oldsnap_notestscalar |
logical |
.false. |
|
lread_oldsnap_onlyA |
logical |
.false. |
|
lreport_undefined_diagnostics |
logical |
.true. |
|
lseed_global |
logical |
.true. |
|
lseed_procdependent |
logical |
.false. |
|
lseparate_persist |
logical |
.false. |
|
lserial_io |
logical |
.false. |
|
lshift_datacube_x |
logical |
.false. |
|
lshift_origin |
logical, dimension(3) |
.false. |
PAR_DOC: if set code{T} for any or some of the three directions, |
lshift_origin_lower |
logical, dimension(3) |
.false. |
PAR_DOC: same as above, but downward. |
lsmooth_farray |
logical |
.false. |
|
lsphere_in_a_box |
logical |
.false. |
|
lsuppress_parallel_reductions |
logical |
.false. |
|
lswap_init_lnrho_uu |
logical |
.false. |
|
lsymmgrid |
logical, dimension(3) |
.true. |
|
ltest_bcs |
(not found) |
||
ltolerate_namelist_errors |
logical |
.false. |
|
luniform_z_mesh_aspect_ratio |
logical |
.false. |
|
luse_latitude |
logical |
.false. |
|
lwrite_2d |
logical |
.false. |
PAR_DOC: if set code{T}, only 2D-snapshots are |
lwrite_aux |
logical |
.false. |
PAR_DOC: if set code{T}, write auxiliary |
lwrite_avg1d_binary |
logical |
.false. |
|
lwrite_ic |
logical |
.true. |
PAR_DOC: if set code{T}, the initial data are |
lwrite_last_powersnap |
logical |
.false. |
|
lwrite_var_anyway |
logical |
.false. |
|
Lxyz |
real, dimension(3) |
PAR_DOC: vector of the form ($x$, $y$, $z$); |
|
lyinyang |
logical |
.false. |
|
m_u_set |
real(KIND=rkind8) |
1. |
|
mag_phispec |
logical |
.false. |
|
mag_spec |
logical |
.false. |
|
modify_filename |
character (len=fnlen) |
‘modify.dat’ |
|
mpoint |
integer |
(:f:var:`~cparam/my`+1)/2 |
|
mpoint2 |
integer |
(:f:var:`~cparam/my`+1)/4 |
|
mu0 |
real |
1. |
magnetic permeability [should be in Magnetic] |
mu_spec |
logical |
.false. |
|
ncoarse |
integer |
0 |
|
nd_spec |
logical |
.false. |
|
nfilter |
integer |
0 |
|
niter_poisson |
integer |
dummy |
|
np_ap_spec |
logical |
.false. |
|
np_spec |
logical |
.false. |
|
npoint |
integer |
floor(((:f:var:`~cparam/mz`+1)/2.) + 0.1) |
|
npoint2 |
integer |
floor(((:f:var:`~cparam/mz`+1)/4.) +0.1) |
|
nprocx_node |
integer |
0 |
|
nprocy_node |
integer |
0 |
|
nprocz_node |
integer |
0 |
|
nycut |
integer |
||
nzcut |
integer |
||
offset_min_calc |
real |
0. |
PAR_DOC: offset value for computing negative minima, |
OmU_spec |
logical |
.false. |
|
oo_spec |
logical |
.false. |
|
ou_phispec |
logical |
.false. |
|
ou_spec |
logical |
.false. |
|
oun_spec |
logical |
.false. |
|
pipe_func |
character (len=labellen) |
‘error_function’ |
|
pot_spec |
logical |
.false. |
|
pretend_lnTT |
logical |
.false. |
PAR_DOC: index{pretend_lnTT} |
r2u_spec |
logical |
.false. |
|
r3u_spec |
logical |
.false. |
|
r_ext |
real |
for spherical shell problems |
|
r_ext_border |
real |
||
r_int |
real |
0. |
for spherical shell problems |
r_int_border |
real |
||
r_ref |
real |
1. |
|
radius_diag |
real |
1.0 |
|
random_gen |
(not found) |
||
rcorot |
real |
1.0 |
|
rel_dang |
real |
0. |
|
relvel_spec |
logical |
.false. |
|
rhocc_pdf |
logical |
.false. |
|
rhop_spec |
logical |
.false. |
|
ro_spec |
logical |
.false. |
|
rsmooth |
real |
0. |
|
SCL_spec |
logical |
.false. |
|
SCL_spec_boost |
logical |
.false. |
|
seed0 |
integer |
1812 |
|
sigmaSB_set |
real(KIND=rkind8) |
1. |
|
sp_spec |
logical |
.false. |
|
ss_spec |
logical |
.false. |
|
ssmask1 |
real |
0.0 |
|
ssmask2 |
real |
0.0 |
|
ssp_spec |
logical |
.false. |
|
sssp_spec |
logical |
.false. |
|
Stg_spec |
logical |
.false. |
|
Str_spec |
logical |
.false. |
|
StT_spec |
logical |
.false. |
|
StX_spec |
logical |
.false. |
|
tag_foreign |
integer |
0 |
|
TGW_spec |
logical |
.false. |
|
thetamin |
real |
0.0 |
|
Tpq_spec |
logical |
.false. |
|
Tra_spec |
logical |
.false. |
|
trans_delta |
real, dimension(3) |
1.0 |
|
trans_width |
real, dimension(3) |
1.0 |
|
tstart |
real |
0.0 |
|
TT_spec |
logical |
.false. |
|
ub_spec |
logical |
.false. |
|
ucp_spec |
logical |
.false. |
|
ud_spec |
logical |
.false. |
|
unit_density |
real(KIND=rkind8) |
PAR_DOC: |
|
unit_length |
real(KIND=rkind8) |
PAR_DOC: allows you to set the |
|
unit_magnetic |
real(KIND=rkind8) |
||
unit_system |
character (len=3) |
‘cgs’ |
PAR_DOC: you can set this character string to index{SI units} |
unit_temperature |
real(KIND=rkind8) |
PAR_DOC: |
|
unit_velocity |
real(KIND=rkind8) |
PAR_DOC: |
|
ux_spec |
logical |
.false. |
|
uxj_phispec |
logical |
.false. |
|
uxj_spec |
logical |
.false. |
|
uxy_spec |
logical |
.false. |
|
uy_spec |
logical |
.false. |
|
uz_spec |
logical |
.false. |
|
uzs_spec |
logical |
.false. |
|
VCT_spec |
logical |
.false. |
|
VCT_spec_boost |
logical |
.false. |
|
vec_phispec |
logical |
.false. |
|
vec_spec |
logical |
.false. |
|
vel_phispec |
logical |
.false. |
|
vel_spec |
logical |
.false. |
|
wav1 |
real |
||
wav1z |
real |
||
xav_max |
real |
||
xi_step_frac |
real, dimension(3,2) |
1.0 |
|
xi_step_width |
real, dimension(3,2) |
1.5 |
|
xy_spec |
character (LEN=labellen*4) |
‘’ |
|
xyz0 |
real, dimension(3) |
- |
PAR_DOC: vector of the form ($x$, $y$, $z$); |
xyz1 |
real, dimension(3) |
||
xyz_star |
real, dimension(3) |
0.0 |
|
xyz_step |
real, dimension(3,2) |
1.0 |
|
xyz_units |
character (len=labellen), dimension(3) |
‘one’ |
|
yequator |
real |
0. |
|
yy_biquad_weights |
real, dimension(4) |
||
zequator |
real |
0. |
|
zeta_grid0 |
real |
0.0 |
Module ascalar.f90
The following variables are part of the ascalar_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
acc_const |
real |
0. |
|
amplacc |
real |
0. |
|
amplttc |
real |
0. |
|
initacc |
character (len=labellen) |
‘nothing’ |
|
initttc |
character (len=labellen) |
‘nothing’ |
|
lbuoyancy |
logical |
.false. |
|
lttc |
logical |
.false. |
|
lttc_mean |
logical |
.false. |
|
qv_env |
real |
1.63e-2 |
|
T_env |
real |
293.0 |
|
ttc_const |
real |
0. |
|
widthacc |
real |
0. |
|
widthttc |
real |
0. |
|
z0_acc |
real |
0. |
Module bfield.f90
The following variables are part of the magnetic_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
b0_ext |
real, dimension(3) |
0.0 |
|
b_ext |
real, dimension(3) |
0.0 |
|
t0_bext |
real |
0.0 |
|
t_bext |
real |
0.0 |
Module chemistry.f90
The following variables are part of the chemistry_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
absorbing_species |
character(len=labellen) |
‘nothing’ |
|
amplchem |
real |
1. |
|
amplchemk |
real, dimension(nchemspec) |
0. |
|
amplchemk2 |
real, dimension(nchemspec) |
0. |
|
chem_diff |
real |
0. |
|
conc_sat_spec_cgs |
real |
1e-8 |
units of mol/cm^3 |
condensing_species |
character (len=labellen) |
‘nothing’ |
|
Cp_const |
(not found) |
||
Cv_const |
real |
||
delta_chem |
real |
0. |
|
Diff_coef_const |
real |
||
file_name |
character(len=60) |
‘nothing’ |
|
flame_pos |
real |
0. |
|
flameind_spec1 |
character(len=5) |
“H2” |
|
flameind_spec2 |
character(len=5) |
“CO2” |
|
global_phi |
real |
||
ifuel_flow |
integer |
0. |
|
init_fuel_molar_ratio |
real, dimension(nchemspec) |
0. |
|
init_fuel_O2_demand |
real, dimension(nchemspec) |
0. |
|
init_phi |
real |
0. |
|
init_premixed_fuel |
character(len=30), dimension(nchemspec) |
“nothing” |
|
init_pressure |
real |
10.13e5 |
|
init_rho |
real |
1. |
|
init_rho2 |
real |
1. |
|
init_temp_fuel |
real |
0. |
|
init_temp_oxidizer |
real |
0. |
|
init_TT1 |
real |
298. |
|
init_TT2 |
real |
2400. |
|
init_ux |
real |
0. |
|
init_uy |
real |
0. |
|
init_uz |
real |
0. |
|
init_x1 |
real |
-0.2 |
|
init_x2 |
real |
0.2 |
|
init_y1 |
real |
-0.2 |
|
init_y2 |
real |
0.2 |
|
init_z1 |
real |
-0.2 |
|
init_z2 |
real |
0.2 |
|
init_zz1 |
real |
0.01 |
|
init_zz2 |
real |
0.2 |
|
initchem |
character(len=labellen), dimension(ninit) |
‘nothing’ |
|
kx_chem |
real |
1. |
|
ky_chem |
real |
1. |
|
kz_chem |
real |
1. |
|
l1step_test |
logical |
.false. |
|
lambda_const |
real |
||
latmchem |
logical |
.false. |
|
lchem_detailed |
logical |
.true. |
|
lchemistry_diag |
logical |
.false. |
|
lcloud |
logical |
.false. |
|
ldamp_zone_for_NSCBC |
logical |
.false. |
|
lDiff_lewis |
logical |
.false. |
|
lDiff_simple |
logical |
.false. |
|
lfilter_strict |
logical |
.false. |
|
lfix_Pr |
logical |
.false. |
|
lfix_Sc |
logical |
.false. |
|
lFlame_index_as_aux |
logical |
.false. |
|
lFlux_simple |
logical |
.false. |
|
lheatc_chemistry |
logical |
.true. |
|
lhotspot |
logical |
.false. |
|
linit_density |
logical |
.false. |
|
linit_temperature |
logical |
.false. |
|
lmixture_fraction_as_aux |
logical |
.false. |
|
lnucl_dynamic |
logical |
.false. |
|
lreac_as_aux |
logical |
.false. |
|
lSmag_diffusion |
logical |
.false. |
|
lSmag_heat_transport |
logical |
.false. |
|
lspecies_cond_simplified |
logical |
.false. |
|
lT_const |
logical |
.false. |
|
lT_tanh |
logical |
.false. |
|
lThCond_simple |
logical |
.false. |
|
mixture_fraction_element |
character(len=2) |
||
nu_spec |
real, dimension(nchemspec) |
0. |
|
Pr_number |
real |
0.7 |
|
Pr_turb |
real |
0.7 |
|
prerun_directory |
character(len=60) |
‘nothing’ |
|
press |
real |
0. |
|
reac_rate_method |
character(len=30) |
‘chemkin’ |
|
Sc_number |
real |
0.7 |
|
str_thick |
real |
0.02 |
|
true_density_cond_spec_cgs |
real |
2.196 |
|
visc_const |
real |
||
widthchem |
real |
1. |
|
z_cloud |
real |
0. |
Module chemistry_simple.f90
The following variables are part of the chemistry_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplchem |
real |
1. |
|
amplchemk |
real, dimension(nchemspec) |
0. |
|
amplchemk2 |
real, dimension(nchemspec) |
0. |
|
chem_diff |
real |
0. |
|
file_name |
character(len=60) |
‘nothing’ |
|
flame_pos |
real |
0. |
|
global_phi |
real |
||
init_pressure |
real |
10.13e5 |
|
init_rho |
real |
1. |
|
init_rho2 |
real |
1. |
|
init_TT1 |
real |
298. |
|
init_TT2 |
real |
2400. |
|
init_ux |
real |
0. |
|
init_uy |
real |
0. |
|
init_uz |
real |
0. |
|
init_x1 |
real |
-0.2 |
|
init_x2 |
real |
0.2 |
|
init_y1 |
real |
-0.2 |
|
init_y2 |
real |
0.2 |
|
init_z1 |
real |
-0.2 |
|
init_z2 |
real |
0.2 |
|
init_zz1 |
real |
0.01 |
|
init_zz2 |
real |
0.2 |
|
initchem |
character(len=labellen), dimension(ninit) |
‘nothing’ |
|
intro_time |
real |
0 |
|
kx_chem |
real |
1. |
|
ky_chem |
real |
1. |
|
kz_chem |
real |
1. |
|
lback |
logical |
.true. |
|
lchemistry_diag |
logical |
.false. |
|
lew_exist |
logical, save |
.false. |
|
Lewis_coef |
real, dimension(nchemspec) |
1. |
|
lfilter_strict |
logical |
.false. |
|
lheatc_chemistry |
logical |
.true. |
|
linit_density |
logical |
.false. |
|
linit_temperature |
logical |
.false. |
|
lmech_simple |
logical |
.false. |
|
lreac_as_aux |
logical |
.false. |
|
lT_const |
logical |
.false. |
|
lT_tanh |
logical |
.false. |
|
lThCond_simple |
logical |
.false. |
|
nu_spec |
real, dimension(nchemspec) |
0. |
|
p_init |
real |
1013000 |
cgs ! |
Pr_turb |
real |
0.7 |
|
prerun_directory |
character(len=60) |
‘nothing’ |
|
reac_rate_method |
character(len=30) |
‘chemkin’ |
|
scale_homo |
real |
0. |
|
str_thick |
real |
0.02 |
|
widthchem |
real |
1. |
|
Y_H2O |
real |
0.0008 |
Module chiral.f90
The following variables are part of the chiral_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplXX_chiral |
real |
.1 |
|
amplYY_chiral |
real |
.1 |
|
amplZZ_chiral |
real |
.1 |
|
cutoffYY_chiral |
real |
0. |
|
initpowerYY_chiral |
real |
2. |
|
initXX_chiral |
character (len=labellen) |
‘zero’ |
|
initYY_chiral |
character (len=labellen) |
‘zero’ |
|
initZZ_chiral |
character (len=labellen) |
‘zero’ |
|
kx_XX_chiral |
real |
1. |
|
kx_YY_chiral |
real |
1. |
|
ky_XX_chiral |
real |
1. |
|
ky_YY_chiral |
real |
1. |
|
kz_XX_chiral |
real |
1. |
|
kz_YY_chiral |
real |
1. |
|
lZZ_chiral |
logical |
.false. |
|
radiusXX_chiral |
real |
0. |
|
radiusYY_chiral |
real |
0. |
|
widthXX_chiral |
real |
.5 |
|
widthYY_chiral |
real |
.5 |
|
xposXX_chiral |
real |
0. |
|
xposYY_chiral |
real |
0. |
|
yposXX_chiral |
real |
0. |
|
yposYY_chiral |
real |
0. |
|
zposXX_chiral |
real |
0. |
|
zposYY_chiral |
real |
0. |
Module cosmicray.f90
The following variables are part of the cosmicray_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplecr |
real |
.1 |
|
amplecr2 |
real |
0. |
|
cosmicray_diff |
real |
0. |
|
ecr_const |
real |
1. |
|
epsilon_ecr |
real |
0. |
|
gammacr |
real |
4./3. |
|
initecr |
character (len=labellen) |
‘zero’ |
|
initecr2 |
character (len=labellen) |
‘zero’ |
|
K_para |
real, target |
0. |
|
K_perp |
real, target |
0. |
|
kx_ecr |
real |
1. |
|
ky_ecr |
real |
1. |
|
kz_ecr |
real |
1. |
|
lnegl |
logical |
.false. |
|
lvariable_tensor_diff |
logical |
.false. |
|
radius_ecr |
real |
0. |
|
widthecr |
real |
.5 |
Module cosmicray_nolog.f90
The following variables are part of the cosmicray_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplecr |
real |
.1 |
|
amplecr2 |
real |
0. |
|
cosmicray_diff |
real |
0. |
|
ecr_const |
real |
0. |
|
epsilon_ecr |
real |
0. |
|
gammacr |
real |
4./3. |
|
initecr |
character (len=labellen) |
‘zero’ |
|
initecr2 |
character (len=labellen) |
‘zero’ |
|
K_para |
real, target |
0. |
|
K_perp |
real, target |
0. |
|
kx_ecr |
real |
1. |
|
ky_ecr |
real |
1. |
|
kz_ecr |
real |
1. |
|
lnegl |
logical |
.false. |
|
lvariable_tensor_diff |
logical |
.false. |
|
radius_ecr |
real |
1. |
|
widthecr |
real |
.5 |
|
x_pos_cr |
real |
.0 |
|
x_pos_cr2 |
real |
.0 |
|
y_pos_cr |
real |
.0 |
|
y_pos_cr2 |
real |
.0 |
|
z_pos_cr |
real |
.0 |
|
z_pos_cr2 |
real |
.0 |
Module cosmicrayflux.f90
The following variables are part of the cosmicrayflux_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
lcosmicrayflux_diffus_dt |
logical |
.false. |
|
lsubgrid_cr |
logical |
.false. |
|
ratio_kpara_kperp |
real |
0. |
|
subgrid_bmin |
real |
0. |
|
subgrid_brms |
real |
1. |
|
subgrid_c1 |
real |
0. |
|
subgrid_c2 |
real |
0. |
|
subgrid_k |
real |
0. |
|
subgrid_s |
real |
5./3. |
|
tau |
real |
0. |
Module density.f90
The following variables are part of the density_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampllnrho |
real, dimension (ninit) |
0.0 |
PAR_DOC: amplitude for some types of initial densities |
amplrho |
real, dimension (ninit) |
0.0 |
|
b_ell |
(not found) |
||
beta_glnrho_global |
real, dimension(3) |
0. |
|
cloud_mode |
character (len=labellen) |
‘isothermal’ |
|
co1_ss |
real |
0.0 |
|
co2_ss |
real |
0.0 |
|
coeflnrho |
complex |
0.0 |
|
cs2bot |
(not found) |
||
cs2top |
(not found) |
||
cutoff_lnrho |
real |
0. |
|
datafile |
character (len=fnlen) |
‘dens_temp.dat’ |
|
dens_coeff |
real |
1.0 |
|
density_floor |
real |
-1.0 |
|
density_floor_exp |
real |
0. |
|
density_floor_profile |
character (len=labellen) |
‘uniform’ |
|
density_xaver_range |
real, dimension(2) |
||
density_zaver_range |
real, dimension(2) |
||
eps_planet |
real |
0.5 |
|
ffree_profile |
character (len=labellen) |
‘none’ |
|
ggamma |
real |
||
hh0 |
real |
0.0 |
|
hoverr |
real |
0.05 |
|
Hrho |
real |
1. |
|
idiff |
character (len=labellen), dimension(ndiff_max) |
‘’ |
|
ieos_profile |
character(LEN=labellen) |
‘nothing’ |
|
initlnrho |
character (len=labellen), dimension(ninit) |
‘nothing’ |
PAR_DOC: |
initpower_lnrho |
real |
2 |
|
invgrav_ampl |
real |
0.0 |
|
ireference_state |
character(LEN=labellen) |
‘nothing’ |
|
kpeak_lnrho |
real |
1. |
|
kx_lnrho |
real, dimension (ninit) |
1.0 |
|
kxx_lnrho |
real, dimension (ninit) |
0.0 |
|
ky_lnrho |
real, dimension (ninit) |
1.0 |
|
kyy_lnrho |
real, dimension (ninit) |
0.0 |
|
kz_lnrho |
real, dimension (ninit) |
1.0 |
|
kzz_lnrho |
real, dimension (ninit) |
0.0 |
|
lanti_shockdiffusion |
logical |
.false. |
|
lconserve_total_mass |
logical |
.false. |
|
lcontinuity_gas |
logical |
.true. |
|
ldensity_linearstart |
(not found) |
||
ldensity_nolog |
(not found) |
||
ldiffusion_nolog |
logical |
.false. |
|
lffree |
logical |
.false. |
|
lisothermal_fixed_Hrho |
logical |
.false. |
|
lmassdiff_fix |
logical |
.false. |
|
lmassdiff_fixkin |
logical |
.false. |
|
lmassdiff_fixmom |
logical |
.false. |
|
lnrho_const |
real |
0.0 |
|
lnrho_z_shift |
real |
0.0 |
|
lpress_equil_uu |
logical |
.false. |
PAR_DOC: adjust lnrho so that .5*u2+cs2*lnrho=const. |
lreduced_sound_speed |
logical, target |
.false. |
|
lrelativistic_eos |
logical |
.false. |
|
lrelativistic_eos_corr |
logical |
.false. |
|
lrelativistic_eos_term1 |
logical |
.true. |
|
lrelativistic_eos_term2 |
logical |
.true. |
|
lrho_as_aux |
logical |
.false. |
|
lrho_flucz_as_aux |
logical |
.false. |
|
lscale_to_cs2top |
logical, target |
.false. |
|
lscale_tobox_lnrho |
logical |
.false. |
|
lwrite_stratification |
logical |
.false. |
|
mass_cloud |
real |
0.0 |
|
mpoly |
real, target |
||
phase_lnrho |
real, dimension (ninit) |
0.0 |
|
powerlr |
real |
3.0 |
|
q_ell |
real |
5.0 |
|
r0_rho |
real |
||
radius_lnrho |
real, dimension (ninit) |
0.5 |
|
rbound |
(not found) |
||
reduce_cs2 |
real, target |
1.0 |
|
rho_bottom |
real |
1. |
|
rho_const |
real |
1.0 |
|
rho_left |
real, dimension (ninit) |
1.0 |
PAR_DOC: needed for code{initlnrho=’shock-tube’} |
rho_right |
real, dimension (ninit) |
1.0 |
PAR_DOC: needed for code{initlnrho=’shock-tube’} |
rho_top |
real |
1. |
|
rnoise_ext |
real |
||
rnoise_int |
real |
||
rzero_ffree |
real |
0. |
|
Sigma1 |
real |
150.0 |
|
strati_type |
character (len=labellen) |
‘lnrho_ss’ |
|
T_cloud |
real |
0.0 |
|
T_cloud_out_rel |
real |
1.0 |
|
temp_coeff |
real |
1.0 |
|
temp_coeff_out |
real |
1.0 |
|
temp_trans |
real |
0.0 |
|
total_mass |
real |
-1. |
|
wdamp |
real |
0.0 |
|
wffree |
real |
0. |
|
width_eos_prof |
real |
0.2 |
|
widthlnrho |
real, dimension (ninit) |
0.1 |
PAR_DOC: width for some types of initial densities |
xblob |
real, dimension (ninit) |
0.0 |
|
xi_coeff |
real |
1.0 |
|
xjump_mid |
real |
0.0 |
|
yblob |
real, dimension (ninit) |
0.0 |
|
yjump_mid |
real |
0.0 |
|
zblob |
real, dimension (ninit) |
0.0 |
|
zjump_mid |
real |
0.0 |
|
zoverh |
real |
1.5 |
Module density_stratified.f90
The following variables are part of the density_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplrho |
real, dimension(ninit) |
0.0 |
|
beta_glnrho_global |
real, dimension(3) |
0. |
|
initrho |
character(len=labellen), dimension(ninit) |
‘nothing’ |
|
lconserve_mass |
logical |
.false. |
|
lmassdiff_fix |
logical |
.false. |
|
lwrite_stratification |
logical |
.false. |
Module dustdensity.f90
The following variables are part of the dustdensity_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
a0 |
real |
0. |
|
a1 |
real |
0. |
|
adpeak |
real |
5.0e-4 |
|
advec_ddensity |
character (len=labellen) |
‘normal’ |
|
amplnd |
real |
1.0 |
|
amplnd_rel |
real, dimension(ndustspec) |
0. |
|
coeff_smooth |
(not found) |
||
deltavd_imposed |
real |
0.0 |
|
dkern_cst |
real |
0.0 |
|
dt_substep |
real |
2e-7 |
|
dustdensity_floor |
real |
-1 |
|
eps_dtog |
real |
0.0 |
|
epsz1_smooth |
real |
0.0 |
|
f_lucky |
real |
0. |
|
Hepsd |
real |
1.0 |
|
Hnd |
real |
1.0 |
|
init_x1 |
real |
0. |
|
init_x2 |
real |
0. |
|
initnd |
character (len=labellen), dimension (ninit) |
‘nothing’ |
|
Kern_min |
real |
0. |
|
kx_nd |
real |
1.0 |
|
ky_nd |
real |
1.0 |
|
kz_nd |
real |
1.0 |
|
latm_chemistry |
logical |
.false. |
|
lcalcdkern |
logical |
.true. |
|
ldcore |
(not found) |
||
ldeltavd_thermal |
logical |
.false. |
|
ldeltavd_turbulent |
logical |
.false. |
|
ldustcoagulation_simplified |
logical |
.false. |
|
ldustcondensation_simplified |
logical |
.false. |
|
ldustcontinuity |
logical |
.true. |
|
ldustdensity_log |
(not found) |
||
ldustnucleation |
logical |
.false. |
|
lkeepinitnd |
logical |
.false. |
|
lmdvar |
(not found) |
||
lmice |
logical |
.false. |
|
lnoaerosol |
logical |
.false. |
|
lnocondens_term |
logical |
.false. |
|
lradius_binning |
logical |
.false. |
|
lsubstep |
logical |
.false. |
|
lupw_ndmdmi |
logical |
.false. |
|
lzero_upper_kern |
logical |
.false. |
|
mdave0 |
real |
1.0 |
|
nd0 |
(not found) |
||
nd0_luck |
real |
0. |
|
nd_const |
real |
1.0 |
|
ndmin_for_mdvar |
real |
0.0 |
|
phase_nd |
real |
0.0 |
|
r_collected |
real |
0. |
|
r_lucky |
real |
0. |
|
radius_nd |
real |
1.0 |
|
rhod0 |
(not found) |
||
Ri0 |
real |
1.0 |
|
rotat_position |
real |
0. |
|
Sigmad |
real |
1.0 |
|
spot_number |
integer |
1 |
|
supsatfac |
real |
1.0 |
|
widthnd |
real |
1.0 |
|
xblob_nd |
real |
0.0 |
|
yblob_nd |
real |
0.0 |
|
z0_smooth |
real |
0.0 |
|
z1_smooth |
real |
0.0 |
|
zblob_nd |
real |
0.0 |
Module dustvelocity.f90
The following variables are part of the dustvelocity_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ad0 |
real |
0.0 |
|
ad1 |
real |
0.0 |
|
ampl_udx |
real |
0.0 |
|
ampl_udy |
real |
0.0 |
|
ampl_udz |
real |
0.0 |
|
ampluud |
real |
0.0 |
|
beta_dPdr_dust |
real |
0.0 |
|
betad0 |
real |
0. |
|
cdtd |
real |
0.2 |
|
coeff |
complex, dimension (7) |
0. |
|
deltamd |
real |
1.0 |
|
draglaw |
character (len=labellen) |
‘epstein_cst’ |
|
dust_binning |
character (len=labellen) |
‘log_mass’ |
|
dust_chemistry |
public |
||
dust_geometry |
character (len=labellen) |
‘sphere’ |
|
gravx_dust |
real |
0.0 |
|
iefficiency_type |
character (len=labellen) |
‘nothing’ |
|
inituud |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
kx_uud |
real |
1.0 |
|
ky_uud |
real |
1.0 |
|
kz_uud |
real |
1.0 |
|
ldustcoagulation |
logical |
.false. |
|
ldustcondensation |
logical |
.false. |
|
ldustvelocity_shorttausd |
logical |
.false. |
|
llin_radiusbins |
logical |
.false. |
|
llog_massbins |
logical |
.true. |
|
lstokes_highspeed_corr |
logical |
.false. |
|
lvshear_dust_global_eps |
logical |
.false. |
|
md0 |
real |
1.0 |
|
mu_ext |
real |
0. |
|
Omega_pseudo |
real |
0.0 |
|
phase_udx |
real |
0.0 |
|
phase_udy |
real |
0.0 |
|
phase_udz |
real |
0.0 |
|
rhods |
public |
||
scaleHtaus |
real |
1.0 |
|
tausd |
public |
||
u0_gas_pseudo |
real |
0.0 |
|
uudx0 |
real |
0.0 |
|
uudy0 |
real |
0.0 |
|
uudz0 |
real |
0.0 |
|
viscd_exponent |
real |
0.0 |
|
viscd_law |
character (len=labellen) |
‘const’ |
|
z0taus |
real |
0.0 |
Module entropy.f90
The following variables are part of the entropy_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
alpha_MLT |
real |
1.5 |
|
ampl_ss |
real, dimension(ninit) |
0.0 |
|
ampl_TT |
real |
0.0 |
|
beta_glnrho_global |
real, dimension(3) |
0. |
|
center1_x |
real, dimension(ninit) |
0.0 |
|
center1_y |
real, dimension(ninit) |
0.0 |
|
center1_z |
real, dimension(ninit) |
0.0 |
|
center2_x |
real |
0.0 |
|
center2_y |
real |
0.0 |
|
center2_z |
real |
0.0 |
|
chi_rho |
real |
0.0 |
|
chi_t |
real |
0.0 |
|
cool2 |
real |
0.0 |
|
cool_fac |
real |
1.0 |
|
cs0hs |
real |
0.0 |
|
cs2cool |
real, target |
0. |
|
cs2cool2 |
real |
0.0 |
|
cs2top_ini |
real |
||
dcs2top_ini |
real |
||
entropy_flux |
real |
0.0 |
|
epsilon_ss |
real |
0.0 |
|
Fbot |
real, target |
set default to 0 vs impossible |
|
grads0 |
(not found) |
||
H0hs |
real |
0.0 |
|
hcond0 |
real, target |
||
hcond0_kramers |
real, target |
0.0 |
|
heat_ceiling |
real |
-1.0 |
|
initss |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
isothtop |
integer, target |
0 |
PAR_DOC: flag for isothermal top layer for |
khor_ss |
real |
1.0 |
|
kx_ss |
real |
1.0 |
|
ky_ss |
real |
1.0 |
|
kz_ss |
real |
1.0 |
|
ladvection_entropy |
logical |
.true. |
|
lconvection_gravx |
logical |
.false. |
|
lcool_prof_as_var |
logical |
.false. |
|
lcooling_ss_mz |
(not found) |
||
lFenth_as_aux |
logical |
.false. |
|
lhcond_global |
logical, target |
.false. |
|
limpose_heat_ceiling |
logical |
.false. |
|
lprestellar_cool_iso |
logical |
.false. |
|
lread_hcond |
logical |
.false. |
|
lss_flucz_as_aux |
logical |
.false. |
|
lss_running_aver_as_aux |
logical |
.false. |
|
lss_running_aver_as_var |
logical |
.false. |
|
lTT_flucz_as_aux |
logical |
.false. |
|
luminosity |
real |
0.0 |
|
lviscosity_heat |
logical |
.true. |
|
mixinglength_flux |
real |
0.0 |
|
mpoly0 |
real, target |
1.5 |
|
mpoly1 |
real, target |
1.5 |
|
mpoly2 |
real, target |
1.5 |
|
nkramers |
real, target |
0.0 |
|
pertss |
character (len=labellen) |
‘zero’ |
|
pp_const |
real |
0.0 |
|
r_bcz |
real |
0.0 |
|
radius_ss |
real, dimension(ninit) |
0.1 |
|
radius_ss_x |
real, dimension(ninit) |
1. |
|
rho0hs |
real |
0.0 |
|
ss_const |
real |
0.0 |
|
ss_left |
real |
1.0 |
|
ss_right |
real |
1.0 |
|
T0 |
real |
0.0 |
|
T0_cgs |
real |
0.0 |
|
tau_cool |
real |
0.0 |
|
tau_cool2 |
real |
0.0 |
|
tau_cool_ss |
real |
0.0 |
|
thermal_background |
real |
0.0 |
|
thermal_peak |
real |
0.0 |
|
thermal_scaling |
real |
1.0 |
|
TT_const |
real |
0.0 |
|
TTref_cool |
real |
0.0 |
|
wheat |
real |
0.1 |
|
widthss |
real |
2* |
|
widthss_ext |
real |
2* |
|
widthss_int |
real |
2* |
|
xjump_mid |
real |
0.0 |
|
yjump_mid |
real |
0.0 |
|
zjump_mid |
real |
0.0 |
Module entropy_const.f90
The following variables are part of the entropy_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
initss |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
ss_const |
real |
1. |
Module entropy_onefluid.f90
The following variables are part of the entropy_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
beta_glnrho_global |
real, dimension(3) |
0. |
|
initss |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
ladvection_energy |
logical |
.true. |
|
ss_const |
real |
0.0 |
|
T0 |
real |
1.0 |
Module eos_chemistry.f90
The following variables are part of the eos_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
cp |
real |
||
cs0 |
real |
1. |
|
error_cp |
real |
1e-6 |
|
gamma |
real |
||
lpp_as_aux |
logical |
.false. |
|
mu |
real |
1. |
|
rho0 |
real |
1. |
Module eos_chemistry_simple.f90
The following variables are part of the eos_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
cp |
real |
||
Cp_const |
real |
||
cs0 |
real |
1. |
|
error_cp |
real |
1e-6 |
|
gamma |
real |
||
linterp_pressure |
logical |
.false. |
This is only used when ogrid to interpolate pressure instead of temperature |
lpres_grad |
logical |
.false. |
|
mu |
real |
1. |
|
rho0 |
real |
1. |
|
scale_Rgas |
real |
1. |
Module eos_fixed_ionization.f90
The following variables are part of the eos_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
kappa_cst |
real |
1. |
|
opacity_type |
character (len=labellen) |
‘ionized_H’ |
|
xH2 |
real |
0. |
|
xHe |
real |
0.1 |
|
yH0 |
real |
.0 |
Module eos_idealgas.f90
The following variables are part of the eos_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
cp |
real |
||
cs0 |
real |
PAR_DOC: can be used to set the dimension of velocity; |
|
cs20_tdep_rate |
real |
1.0 |
|
cs2_tdep_ascale_power |
real |
0. |
|
error_cp |
real |
1.0e-6 |
|
fac_cs |
real |
1.0 |
|
gamma |
real |
5.0/3.0 |
PAR_DOC: adiabatic index $gamma=c_p/c_v$. |
gz_coeff |
real |
0.0 |
|
gztype |
character(len=labellen) |
‘zero’ |
|
isothmid |
integer |
0 |
|
lanelastic_lin |
logical |
.false. |
|
lcs2_tdep |
logical |
.false. |
|
lcs_as_aux |
logical |
.false. |
|
lcs_as_comaux |
logical |
.false. |
|
lpres_grad |
logical |
.false. |
|
lstratz |
(not found) |
||
mu |
real |
1.0 |
|
rho0 |
real |
1. |
PAR_DOC: label{cs0-rho0-init}% |
sigmaSBt |
real |
1.0 |
|
tdep_cs2_type |
character(len=labellen) |
‘exponential’ |
|
xHe |
real |
0.0 |
Module eos_ionization.f90
The following variables are part of the eos_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
lcp_as_aux |
logical |
.false. |
|
lpp_as_aux |
logical |
.false. |
|
xHe |
real |
0.1 |
|
yHacc |
real |
1e-5 |
|
yMetals |
real |
0 |
Module eos_temperature_ionization.f90
The following variables are part of the eos_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
B_ext_eos |
real, dimension (3) |
(/0.,0.,0./) |
|
chiH_eV |
real |
13.6 |
|
chiHminus_eV |
real |
0.754 |
|
lconst_yH |
logical |
.false. |
|
lcp_as_aux |
logical |
.false. |
|
lcs_as_aux |
logical |
.false. |
|
lcv_as_aux |
logical |
.false. |
|
ldelta_as_aux |
logical |
.false. |
|
lgamma_as_aux |
logical |
.false. |
|
lHminus_opacity_correction |
logical |
.false. |
|
lnabad_as_aux |
logical |
.false. |
|
lnpp_bot |
real |
0. |
|
lpp_as_aux |
logical |
.false. |
|
lrevise_chiH_eV |
logical |
.false. |
|
lrevise_chiHminus_eV |
logical |
.false. |
|
lss_as_aux |
logical |
.false. |
|
ss_bot |
real |
0. |
|
tau_relax |
real |
1.0 |
|
TTbot |
real |
0. |
|
TTtop |
real |
0. |
|
va2max_eos |
real |
||
va2power_eos |
integer |
5 |
|
xHe |
real |
0.1 |
|
yH_const |
real |
0.0 |
|
yMetals |
real |
0.0 |
Module gravity_r.f90
The following variables are part of the grav_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
frac_smooth |
real |
1.0 |
|
g0 |
real |
0. |
|
g01 |
real, dimension(ninit) |
0. |
|
g1 |
real, target |
0. |
|
gravz |
real |
0. |
|
gravz_profile |
character (len=labellen) |
‘zero’ |
|
ipotential |
character (len=labellen), dimension(ninit) |
‘zero’ |
|
ipotential_secondary |
character (len=labellen) |
‘plummer’ |
|
iramp_function |
character (len=labellen) |
‘linear’ |
|
lcentrifugal_force_gravity |
logical |
.true. |
|
lconservative_gravity |
logical |
.true. |
|
lcoriolis_force_gravity |
logical |
.true. |
|
lgravity_gas |
logical |
.true. |
|
lgravity_neutrals |
logical |
.true. |
|
lindirect_terms |
logical |
.true. |
|
lnumerical_equilibrium |
logical |
.false. |
|
lramp_mass |
logical, target |
.false. |
|
lsecondary_wait |
logical, target |
.false. |
|
n_pot |
real |
10 |
exponent for smoothed potential |
n_pot1 |
real |
10 |
exponent for smoothed potential |
non_conservative_index |
real |
2.0 |
|
nu_epicycle |
real |
1.0 |
|
qgshear |
real |
1.5 |
(global) shear parameter |
r0_pot |
real |
0. |
peak radius for smoothed potential |
r1_pot1 |
real |
0. |
peak radius for smoothed potential |
rp1_smooth |
real, target |
||
rpot |
real, dimension(ninit) |
0. |
|
t_ramp_mass |
real, target |
||
t_start_secondary |
real, target |
Module gravity_simple.f90
The following variables are part of the grav_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
accretor_grav |
real |
0. |
|
accretor_rsoft |
real |
0. |
|
accretor_speed |
real |
0. |
|
cs0hs |
real |
0.0 |
|
dgravx |
real |
0.0 |
|
g_A_factor |
real |
1.0 |
|
g_B_factor |
real(KIND=rkind8) |
1.0 |
|
g_C_factor |
real |
1.0 |
|
g_D_factor |
real(KIND=rkind8) |
1.0 |
|
g_ref |
real |
0.0 |
|
grav_amp |
real |
0.0 |
PAR_DOC: specific to the tilted gravity case (amplitude). |
grav_tilt |
real |
0.0 |
PAR_DOC: specific to the tilted gravity case (angle wrt |
grav_type |
character (len=labellen) |
‘default’ |
|
gravitational_const |
real |
0. |
|
gravx |
real |
0.0 |
|
gravx_profile |
character (len=labellen) |
‘zero’ |
|
gravy |
real |
0.0 |
|
gravy_profile |
character (len=labellen) |
‘zero’ |
|
gravz |
real |
0.0 |
PAR_DOC: vertical gravity component $g_z$. |
gravz_profile |
character (len=labellen) |
‘zero’ |
PAR_DOC: constant gravity |
H0hs |
real |
0.0 |
|
kappa_x1 |
real |
0.0 |
|
kappa_x2 |
real |
0.0 |
|
kappa_z1 |
real |
0.0 |
|
kappa_z2 |
real |
0.0 |
|
kx_gg |
real |
1.0 |
|
ky_gg |
real |
1.0 |
|
kz_gg |
real |
1.0 |
|
laccretor_peri |
logical |
.false. |
|
lboussinesq_grav |
logical |
.false. |
|
lcalc_zinfty |
logical |
.false. |
|
lgravx_dust |
(not found) |
||
lgravx_gas |
(not found) |
||
lgravy_dust |
(not found) |
||
lgravy_gas |
(not found) |
||
lgravz_dust |
(not found) |
||
lgravz_gas |
(not found) |
||
lnrho_bot |
real |
0.0 |
|
lnrho_top |
real |
0.0 |
|
lxyzdependence |
logical |
.false. |
|
mass_cent_body |
real |
0. |
|
n_adjust_sphersym |
integer |
0 |
|
n_pot |
integer |
10 |
|
nu_epicycle |
real |
1.0 |
PAR_DOC: vertical epicyclic frequency; for accretion |
nux_epicycle |
real |
0.0 |
|
pot_ratio |
real |
1.0 |
|
potx_const |
real |
0.0 |
|
poty_const |
real |
0.0 |
|
potz_const |
real |
0.0 |
|
reduced_top |
real |
1.0 |
|
Rgal |
real |
||
Rsol |
real |
||
sphere_rad |
real |
0.0 |
|
ss_bot |
real |
0.0 |
|
ss_top |
real |
0.0 |
|
xgrav |
real |
||
xinfty |
real |
0.0 |
|
xref |
real |
0.0 |
|
ygrav |
real |
||
yinfty |
real |
0.0 |
|
z1 |
real |
0.0 |
PAR_DOC: specific to the solar convection case |
z2 |
real |
1.0 |
PAR_DOC: specific to the solar convection case |
zclip |
real |
||
zgrav |
real |
||
zinfty |
real |
||
zref |
real |
PAR_DOC: label{zref-init}% |
Module hydro.f90
The following variables are part of the hydro_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
alpha_hless |
real |
.0 |
|
alpha_precession |
real |
0. |
|
amp_factor |
real |
0. |
|
amp_meri_circ |
real |
0.0 |
|
ampl_Omega |
real |
0.0 |
|
ampl_ux |
real, dimension (ninit) |
0.0 |
|
ampl_uy |
real, dimension (ninit) |
0.0 |
|
ampl_uz |
real, dimension (ninit) |
0.0 |
|
ampluu |
real, dimension (ninit) |
0.0 |
PAR_DOC: amplitude for some types of |
coefuu |
complex, dimension (3) |
(/0.,0.,0./) |
|
cutoff |
real |
0. |
|
delta_u |
real |
1 |
|
gap |
real |
0. |
|
hydro_xaver_range |
real, dimension(2) |
||
hydro_zaver_range |
real, dimension(2) |
||
incl_alpha |
real |
0.0 |
|
index_rSH |
integer |
1 |
ceiling(nx/2.) |
initpower |
real |
1. |
|
initpower2 |
real |
-5./3. |
|
inituu |
character (len=labellen), dimension(ninit) |
‘nothing’ |
PAR_DOC: |
kgaussian_uu |
real |
0. |
|
kpeak |
real |
10. |
|
kx_uu |
real, dimension (ninit) |
1.0 |
|
kx_uu_perturb |
real |
0. |
|
kx_ux |
real, dimension (ninit) |
0.0 |
|
kx_uy |
real, dimension (ninit) |
0.0 |
|
kx_uz |
real, dimension (ninit) |
0.0 |
|
ky_uu |
real, dimension (ninit) |
1.0 |
|
ky_ux |
real, dimension (ninit) |
0.0 |
|
ky_uy |
real, dimension (ninit) |
0.0 |
|
ky_uz |
real, dimension (ninit) |
0.0 |
|
kz_uu |
real, dimension (ninit) |
1.0 |
|
kz_ux |
real, dimension (ninit) |
0.0 |
|
kz_uy |
real, dimension (ninit) |
0.0 |
|
kz_uz |
real, dimension (ninit) |
0.0 |
|
ladvection_velocity |
logical |
.true. |
|
lampluu_adjust_ascale |
logical |
.false. |
PAR_DOC: automatically adjust initial u-amplitude |
lcentrifugal_force |
logical |
.false. |
|
lconservative |
logical |
.false. |
|
lcoriolis_force |
logical |
.true. |
|
lfactors_uu |
logical |
.false. |
|
lhiggsless |
logical |
.false. |
|
lhiggsless_old |
logical |
.false. |
|
ll_sh |
integer, dimension(ninit) |
0 |
|
llinearized_hydro |
logical |
.false. |
|
llorentz_as_aux |
logical |
.false. |
|
llorentz_limiter |
logical |
.false. |
|
lno_noise_uu |
logical |
.false. |
|
lnorm_vw_hless |
logical |
.false. |
|
loo_as_aux |
logical |
.false. |
|
look_as_aux |
logical |
.false. |
|
loost_as_aux |
logical |
.false. |
|
loot_as_aux |
logical |
.false. |
|
louinit |
logical |
.false. |
|
lpower_profile_file_uu |
logical |
.false. |
|
lprecession |
logical |
.false. |
|
lpressuregradient_gas |
logical, target |
.true. |
|
lrandom_ampl_uu |
logical |
.false. |
|
lreflecteddy |
logical |
.false. |
|
lrelativistic |
logical |
.false. |
|
lrho_nonuni_uu |
logical |
.false. |
|
lscale_tobox |
logical |
.true. |
|
lset_uz_zero |
logical |
.false. |
|
lskip_projection |
logical |
.false. |
|
lsqrt_qirro_uu |
logical |
.false. |
|
luij_as_aux |
logical |
.false. |
|
luij_test |
logical |
.false. |
|
luu_fluc_as_aux |
logical |
.false. |
|
luu_sph_as_aux |
logical |
.false. |
|
luuk_as_aux |
logical |
.false. |
|
luust_as_aux |
logical |
.false. |
|
luut_as_aux |
logical |
.false. |
|
lvv_as_aux |
logical |
.false. |
|
lvv_as_comaux |
logical |
.false. |
|
max_uu |
real |
0. |
|
mm_sh |
integer, dimension(ninit) |
0 |
|
mu_omega |
real |
0. |
|
N_modes_uu |
integer |
0 |
, iuij=0 |
n_xprof |
integer, dimension(ninit) |
-1 |
|
nb_rings |
integer |
0 |
|
ncutoff |
real |
1. |
|
neddy |
integer |
0 |
|
nfact_uu |
real |
4. |
|
om_rings |
real, dimension (5) |
0. |
|
Omega |
(not found) |
||
omega_ini |
real |
0.0 |
|
omega_precession |
real |
0. |
|
phase_ux |
real, dimension (ninit) |
0.0 |
|
phase_uy |
real, dimension (ninit) |
0.0 |
|
phase_uz |
real, dimension (ninit) |
0.0 |
|
qini |
real |
0. |
|
qirro_uu |
real |
0. |
|
qshear |
(not found) |
||
r_cyl |
real |
1.0 |
|
r_omega |
real |
0. |
|
radiusuu |
real |
1. |
|
relhel_uu |
real |
1. |
|
rnoise_ext |
real |
||
rnoise_int |
real |
||
robflow_uu |
character (len=labellen), dimension(ninit) |
‘I’ |
|
rot_rr |
real |
0.0 |
|
skin_depth |
real |
1e-1 |
|
u_out_kep |
real |
0.0 |
|
uij_0D_test |
real, dimension(3,3) |
0. |
|
urand |
real |
0. |
PAR_DOC: additional random perturbation of $uv$. If |
urandi |
real |
0. |
|
uu_const |
real, dimension (3) |
(/0.,0.,0./) |
|
uu_left |
real |
0. |
PAR_DOC: needed for code{inituu=’shock-tube’} |
uu_lower |
real |
1. |
|
uu_right |
real |
0. |
PAR_DOC: needed for code{inituu=’shock-tube’} |
uu_upper |
real |
1. |
|
uu_xz_angle |
real, dimension (ninit) |
0.0 |
|
uy_left |
real |
0. |
|
uy_right |
real |
0. |
|
velocity_ceiling |
real |
.0 |
|
vwall |
real |
.0 |
|
w_omega |
real |
0. |
|
width_hless |
real |
.0 |
|
widthuu |
real |
.1 |
PAR_DOC: width for some types of initial velocities. |
xjump_mid |
real |
0. |
|
xsphere |
real |
0.0 |
|
yjump_mid |
real |
0. |
|
ysphere |
real |
0.0 |
|
z1_uu |
real |
0. |
|
z2_uu |
real |
0. |
|
zjump_mid |
real |
0. |
|
zsphere |
real |
0.0 |
Module hydro_kinematic.f90
The following variables are part of the hydro_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
lkinflow_as_comaux |
logical |
.false. |
|
lkinflow_as_uudat |
logical |
.false. |
Module hydro_potential.f90
The following variables are part of the hydro_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
alpha_precession |
real |
0. |
|
amp_factor |
real |
0. |
|
amp_meri_circ |
real |
0.0 |
|
ampl_ux |
real, dimension (ninit) |
0.0 |
|
ampl_uy |
real, dimension (ninit) |
0.0 |
|
ampl_uz |
real, dimension (ninit) |
0.0 |
|
ampluu |
real, dimension (ninit) |
0.0 |
|
coefuu |
complex, dimension (3) |
(/0.,0.,0./) |
|
cutoff |
real |
0. |
|
delta_u |
real |
1. |
|
gap |
real |
0. |
|
hydro_xaver_range |
real, dimension(2) |
||
hydro_zaver_range |
real, dimension(2) |
||
incl_alpha |
real |
0.0 |
|
initpower |
real |
1. |
|
initpower2 |
real |
-5./3. |
|
inituu |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
kgaussian_uu |
real |
0. |
|
kpeak |
real |
10. |
|
kx_uu |
real |
1. |
|
kx_uu_perturb |
real |
0. |
|
kx_ux |
real, dimension (ninit) |
0.0 |
|
kx_uy |
real, dimension (ninit) |
0.0 |
|
kx_uz |
real, dimension (ninit) |
0.0 |
|
ky_uu |
real |
1. |
|
ky_ux |
real, dimension (ninit) |
0.0 |
|
ky_uy |
real, dimension (ninit) |
0.0 |
|
ky_uz |
real, dimension (ninit) |
0.0 |
|
kz_uu |
real |
1. |
|
kz_ux |
real, dimension (ninit) |
0.0 |
|
kz_uy |
real, dimension (ninit) |
0.0 |
|
kz_uz |
real, dimension (ninit) |
0.0 |
|
ladvection_velocity |
logical |
.true. |
|
lcentrifugal_force |
logical |
.false. |
|
lcoriolis_force |
logical |
.true. |
|
ll_sh |
integer, dimension(ninit) |
0 |
|
llinearized_hydro |
logical |
.false. |
|
lno_second_ampl |
logical |
.true. |
|
loo_as_aux |
logical |
.false. |
|
loot_as_aux |
logical |
.false. |
|
louinit |
logical |
.false. |
|
lprecession |
logical |
.false. |
|
lpressuregradient_gas |
logical, target |
.true. |
|
lreflecteddy |
logical |
.false. |
|
lscale_tobox |
logical |
.true. |
|
lskip_projection |
logical |
.false. |
|
luut_as_aux |
logical |
.false. |
|
max_uu |
real |
0. |
|
mm_sh |
integer, dimension(ninit) |
0 |
|
mu_omega |
real |
0. |
|
n_xprof |
integer, dimension(ninit) |
-1 |
|
ncutoff |
real |
1. |
|
omega_ini |
real |
0.0 |
|
omega_precession |
real |
0. |
|
phase_ux |
real, dimension (ninit) |
0.0 |
|
phase_uy |
real, dimension (ninit) |
0.0 |
|
phase_uz |
real, dimension (ninit) |
0.0 |
|
r_cyl |
real |
1.0 |
|
r_omega |
real |
0. |
|
radiusuu |
real |
1. |
|
relhel_uu |
real |
1. |
|
rnoise_ext |
real |
||
rnoise_int |
real |
||
rot_rr |
real |
0.0 |
|
skin_depth |
real |
1e-1 |
|
u_out_kep |
real |
0.0 |
|
urand |
real |
0. |
|
urandi |
real |
0. |
|
uu_const |
real, dimension (3) |
(/0.,0.,0./) |
|
uu_left |
real |
0. |
|
uu_lower |
real |
1. |
|
uu_right |
real |
0. |
|
uu_upper |
real |
1. |
|
uu_xz_angle |
real, dimension (ninit) |
0.0 |
|
uy_left |
real |
0. |
|
uy_right |
real |
0. |
|
w_omega |
real |
0. |
|
widthuu |
real |
.1 |
|
xsphere |
real |
0.0 |
|
ysphere |
real |
0.0 |
|
z1_uu |
real |
0. |
|
z2_uu |
real |
0. |
|
zsphere |
real |
0.0 |
Module interstellar.f90
The following variables are part of the interstellar_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl_SN |
real |
||
average_SNI_heating |
real |
||
average_SNII_heating |
real |
||
center_SN_x |
real |
||
center_SN_y |
real |
||
center_SN_z |
real |
||
cooling_select |
character (len=labellen) |
‘WSW’ |
|
energy_Nsigma |
real |
||
energy_width_ratio |
real |
1. |
|
eps_mass |
real |
0.05 |
|
frac_ecr |
real |
0.0 |
|
frac_kin |
real |
0.0 |
|
GammaUV |
real |
||
h_SNI |
real |
||
h_SNII |
real |
||
heating_rate |
real |
0.015 |
|
heating_select |
character (len=labellen) |
‘wolfire’ |
|
initial_SNI |
integer |
0 |
|
initinterstellar |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
inner_shell_proportion |
real |
1. |
|
kin_max |
real |
0.075 |
|
kpara |
real |
0.025 |
|
kperp |
real |
0.05 |
|
lheatz_min |
logical |
.true. |
|
lSN_autofrackin |
logical |
.true. |
|
lSN_coolingmass |
logical |
.false. |
|
lSN_ecr |
logical |
.false. |
|
lSN_eth |
logical |
.true. |
|
lSN_fcr |
logical |
.false. |
|
lSN_list |
logical |
.false. |
|
lSN_mass |
logical |
.false. |
|
lSN_momentum |
logical |
.true. |
|
lSN_scale_rad |
logical |
.false. |
|
lSNI |
logical |
.true. |
|
lSNII |
logical |
.true. |
|
lSNII_gaussian |
logical |
.true. |
|
lthermal_hse |
logical |
.false. |
|
ltrim_profile |
logical |
.false. |
|
luniform_zdist_SNI |
logical |
.false. |
|
mass_profile |
character (len=labellen) |
‘gaussian’ |
|
mass_SN |
real |
||
mass_width_ratio |
real |
1. |
|
N_mass |
real |
250.0 |
|
Nsol_added |
real |
30. |
|
outer_shell_proportion |
real |
1.2 |
|
rfactor_SN |
real |
5.0 |
|
rho0ts |
real |
||
rho_SN_max |
real |
||
rho_SN_min |
real |
||
SN_rho_ratio |
real |
1e4 |
|
SN_TT_ratio |
real |
1.0e1 |
|
SNI_factor |
real |
1.0 |
|
SNII_factor |
real |
1.0 |
|
T_init |
real |
||
t_next_SNI |
real |
0.0 |
|
t_next_SNII |
real |
0.0 |
|
thermal_profile |
character (len=labellen) |
‘gaussian’ |
|
TT_SN_max |
real |
||
velocity_profile |
character (len=labellen) |
‘gaussian’ |
|
velocity_width_ratio |
real |
1. |
|
width_SN |
real |
Module interstellar_old.f90
The following variables are part of the interstellar_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl_SN |
real |
||
center_SN_x |
real |
||
center_SN_y |
real |
||
center_SN_z |
real |
||
cooling_select |
character (len=labellen) |
‘RBN’ |
|
energy_width_ratio |
real |
1. |
|
frac_ecr |
real |
0.1 |
|
frac_eth |
real |
0.9 |
|
h_SNI |
real |
||
h_SNII |
real |
||
heating_rate |
real |
0.015 |
|
heating_select |
character (len=labellen) |
‘wolfire’ |
|
initial_SNI |
integer |
0 |
|
initinterstellar |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
inner_shell_proportion |
real |
1. |
|
kampl_SN |
real |
||
lheatz_min |
logical |
.true. |
|
lSN_ecr |
logical |
.true. |
|
lSN_eth |
logical |
.true. |
|
lSN_fcr |
logical |
.false. |
|
lSN_mass |
logical |
.true. |
|
lSN_scale_rad |
logical |
.false. |
|
lSN_velocity |
logical |
.false. |
|
lSNI |
logical |
.true. |
|
lSNII |
logical |
.false. |
|
lSNII_gaussian |
logical |
.true. |
|
lthermal_hse |
logical |
.false. |
|
mass_movement |
character (len=labellen) |
‘off’ |
|
mass_profile |
character (len=labellen) |
‘gaussian3’ |
|
mass_SN |
real |
||
mass_width_ratio |
real |
1. |
|
N_mass |
real |
60.0 |
|
outer_shell_proportion |
real |
1.2 |
|
rho0ts |
real |
||
rho_SN_max |
real |
||
rho_SN_min |
real |
||
SNR_damping |
real |
0. |
|
T0hs |
real |
||
t_next_SNI |
real |
0.0 |
|
t_next_SNII |
real |
0.0 |
|
thermal_profile |
character (len=labellen) |
‘gaussian3’ |
|
TT_SN_max |
real |
||
uniform_zdist_SNI |
logical |
.false. |
|
uu_sedov_max |
real |
0. |
|
velocity_profile |
character (len=labellen) |
‘lineartanh’ |
|
velocity_SN |
real |
||
velocity_width_ratio |
real |
1. |
|
width_SN |
real |
Module lorenz_gauge.f90
The following variables are part of the lorenz_gauge_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl |
real |
1e-3 |
|
cphi |
real |
1. |
|
etaphi |
real |
0. |
|
init |
character(len=50) |
‘zero’ |
|
kx |
real |
1. |
|
ky |
real |
0. |
|
kz |
real |
0. |
Module magnetic.f90
The following variables are part of the magnetic_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ABCaa |
real, dimension(3) |
1. |
|
alp_aniso |
real |
0.0 |
|
alpf_MHD |
real |
0. |
PAR_DOC: axion coupling (in MHD, if not defined in disp_current) |
amp_relprof |
real |
1.0 |
|
ampl_ax |
real, dimension (ninit) |
0.0 |
|
ampl_ay |
real, dimension (ninit) |
0.0 |
|
ampl_az |
real, dimension (ninit) |
0.0 |
|
ampl_B0 |
real |
0.0 |
|
amplaa |
real, dimension (ninit) |
0.0 |
PAR_DOC: amplitude for some types of |
amplaa2 |
real, dimension (ninit) |
0.0 |
PAR_DOC: amplitude for some types of |
amplaaB |
real, dimension (ninit) |
0.0 |
|
amplaaJ |
real, dimension (ninit) |
0.0 |
|
angle_dip |
real |
0. |
|
B0_ext |
real, dimension(3) |
0.0 |
|
B0_ext_z |
real |
0.0 |
|
B0_ext_z_H |
real |
0.0 |
|
B_ext |
real, dimension(3) |
0.0 |
|
bij_0D_test |
real, dimension(3,3) |
0. |
|
by_left |
real |
0.0 |
|
by_right |
real |
0.0 |
|
bz_left |
real |
0.0 |
|
bz_right |
real |
0.0 |
|
center1_x |
real |
0.0 |
|
center1_y |
real |
0.0 |
|
center1_z |
real |
0.0 |
|
cmin |
real |
0.0 |
|
coefaa |
complex, dimension(3) |
(/0.0,0.0,0.0/) |
|
coefbb |
complex, dimension(3) |
(/0.0,0.0,0.0/) |
|
compk_aa |
real |
0. |
|
cutoff_aa |
real |
0.0 |
|
damp |
real |
0. |
|
dipole_moment |
real |
0.0 |
|
epsi_dip |
real |
0.1 |
|
epsilonaa |
real |
0.01 |
PAR_DOC: used by some initial fields |
eta_jump |
real |
0.0 |
|
eta_jump0 |
real |
0.0 |
|
eta_jump1 |
real |
0.0 |
|
eta_jump2 |
real |
0.0 |
|
eta_tdep_loverride_ee |
real |
0. |
|
etaB |
real |
0. |
|
fluxtube_border_width |
real |
||
inclaa |
real |
0.0 |
|
indzav |
integer |
0 |
|
initaa |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
initpower2_aa |
real |
-11./3. |
|
initpower_aa |
real |
0.0 |
|
izav_start |
integer |
1 |
|
J_ext |
real, dimension(3) |
(/0.0,0.0,0.0/) |
|
k1hel |
real |
0. |
|
k2hel |
real |
||
k_relprof |
real |
1.0 |
|
kgaussian_aa |
real |
0. |
|
kpeak_aa |
real |
10. |
|
kx_aa |
real, dimension (ninit) |
1.0 |
|
kx_ax |
real, dimension (ninit) |
0.0 |
|
kx_ay |
real, dimension (ninit) |
0.0 |
|
kx_az |
real, dimension (ninit) |
0.0 |
|
ky_aa |
real, dimension (ninit) |
1.0 |
|
ky_ax |
real, dimension (ninit) |
0.0 |
|
ky_ay |
real, dimension (ninit) |
0.0 |
|
ky_az |
real, dimension (ninit) |
0.0 |
|
kz_aa |
real, dimension (ninit) |
1.0 |
|
kz_ax |
real, dimension (ninit) |
0.0 |
|
kz_ay |
real, dimension (ninit) |
0.0 |
|
kz_az |
real, dimension (ninit) |
0.0 |
|
l2d_aa |
logical |
.false. |
|
laa_cou_as_aux |
logical |
.false. |
|
ladd_bb_init |
logical |
.false. |
|
ladd_disp_current_from_aux |
logical |
.false. |
|
lax_ext_global |
logical |
.false. |
|
lay_ext_global |
logical |
.false. |
|
laz_ext_global |
logical |
.false. |
|
lB_ext_in_comaux |
logical |
.true. |
|
lB_ext_pot |
logical |
.false. |
|
lbb_as_aux |
logical |
.false. |
|
lbb_as_comaux |
logical |
.false. |
|
lbb_sph_as_aux |
logical |
.false. |
|
lbbt_as_aux |
logical |
.false. |
|
lbdivu_as_aux |
logical |
.false. |
|
lbeta_as_aux |
logical |
.false. |
|
lbext_curvilinear |
logical |
.true. |
|
lbgu_as_aux |
logical |
.false. |
|
lbij_as_aux |
logical |
.false. |
|
lbij_test |
logical |
.false. |
|
lbx_ext_global |
logical |
.false. |
|
lby_ext_global |
logical |
.false. |
|
lbz_ext_global |
logical |
.false. |
|
lcheck_positive_va2 |
logical |
.false. |
|
lcoulomb |
logical |
.false. |
|
lcoulomb_apply |
logical |
.false. |
|
lcurlb_as_aux |
logical |
.false. |
|
ldensity_add_je_heating |
logical |
.false. |
|
learly_set_el_pencil |
logical |
.true. |
|
lee_as_aux |
logical |
.false. |
|
lfactors_aa |
logical |
.false. |
|
lforce_free_test |
logical |
.false. |
|
lhubble_magnetic |
logical |
.false. |
|
limiter_fact |
real |
1. |
PAR_DOC: limiter factor |
lj2t_as_aux |
logical |
.false. |
|
ljbt_as_aux |
logical |
.false. |
|
ljj_as_aux |
logical |
.false. |
|
ljj_as_comaux |
logical |
.false. |
|
ljjt_as_aux |
logical |
.false. |
|
ljxb_as_aux |
logical |
.false. |
|
ll_sh |
integer, dimension (ninit) |
0 |
|
llimiter |
logical |
.false. |
|
lneutralion_heat |
logical |
.true. |
|
lno_noise_aa |
logical |
.false. |
|
lnorm_aa_kk |
logical |
.false. |
|
lohm_evolve |
logical |
.false. |
|
lohmic_heat |
logical |
.true. |
|
loverride_ee_decide |
logical |
.false. |
|
lpower_profile_file |
logical |
.false. |
|
lpress_equil |
logical |
.false. |
PAR_DOC: flag for pressure equilibrium (can |
lpress_equil_alt |
logical |
.false. |
|
lpress_equil_via_ss |
logical |
.false. |
|
lrandom_ampl_aa |
logical |
.false. |
|
lscale_tobox |
logical |
.true. |
|
lset_AxAy_zero |
logical |
.false. |
|
lskip_projection_aa |
logical |
.false. |
|
lsmooth_jj |
logical |
.false. |
|
lsquash_aa |
logical |
.false. |
|
lua_as_aux |
logical |
.false. |
|
lugb_as_aux |
logical |
.false. |
|
luxb_as_aux |
logical |
.false. |
|
lvacuum |
logical |
.false. |
|
magnetic_xaver_range |
real, dimension(2) |
||
magnetic_yaver_range |
real, dimension(2) |
||
magnetic_zaver_range |
real, dimension(2) |
||
mix_factor |
real |
0. |
|
mm_sh |
integer, dimension (ninit) |
0 |
|
mu_ext_pot |
real |
-0.5 |
|
mu_r |
real |
-0.5 |
(still needed for backwards compatibility) |
N_modes_aa |
integer |
1 |
|
ncutoff_aa |
real |
1. |
|
nexp_aa |
real |
0. |
|
nfact_aa |
real |
4. |
|
non_ffree_factor |
real |
1. |
|
nzav |
integer |
0 |
|
phase_aa |
real, dimension (ninit) |
0.0 |
|
phase_ax |
real, dimension (ninit) |
0.0 |
|
phase_ay |
real, dimension (ninit) |
0.0 |
|
phase_az |
real, dimension (ninit) |
0.0 |
|
phasex_aa |
real, dimension (ninit) |
0.0 |
|
phasey_aa |
real, dimension (ninit) |
0.0 |
|
phasez_aa |
real, dimension (ninit) |
0.0 |
|
qexp_aa |
real |
0. |
|
r_dip |
real |
1 |
|
r_inner |
real |
0. |
|
r_outer |
real |
0. |
|
radius |
real |
0.1 |
PAR_DOC: used by some initial fields |
radRFP |
real |
1. |
|
relhel_aa |
real |
1. |
|
RFPrad |
real, dimension (ninit) |
1.0 |
|
RFPradB |
real |
1. |
|
RFPradJ |
real |
1. |
|
rnoise_ext |
real |
||
rnoise_int |
real |
||
robflow_aa |
character (len=labellen), dimension(ninit) |
‘I’ |
|
sheet_hyp |
real |
1. |
|
sheet_position |
real |
1. |
|
sheet_thickness |
real |
0.1 |
|
source_zav |
character (len=fnlen) |
‘’ |
|
t0_bext |
real |
0.0 |
|
t_bext |
real |
0.0 |
|
tau_relprof |
real |
0.0 |
|
th_spot |
real |
PI/4 |
|
two_step_factor |
real |
1. |
|
va2max_boris |
real |
0.0 |
|
va2max_jxb |
real |
0.0 |
|
va2power_jxb |
integer, target |
5 |
|
width_gaussian |
real, dimension (ninit) |
0.0 |
|
widthaa |
real, dimension(3) |
0.5 |
PAR_DOC: used by some initial fields |
x0aa |
real |
0.0 |
|
y0aa |
real |
0.0 |
|
z0_gaussian |
real, dimension (ninit) |
0.0 |
|
z0aa |
real |
0.0 |
PAR_DOC: used by some initial fields |
z1_aa |
real |
0. |
|
z2_aa |
real |
0. |
|
znoise_ext |
real |
||
znoise_int |
real |
Module neutraldensity.f90
The following variables are part of the neutraldensity_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
alpha |
real |
0. |
|
alpha_prescription |
character (len=labellen) |
‘const’ |
|
ampllnrhon |
real |
0. |
|
idiffn |
character (len=labellen), dimension(ndiff_max) |
‘’ |
|
initlnrhon |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
kx_lnrhon |
real |
1. |
|
ky_lnrhon |
real |
1. |
|
kz_lnrhon |
real |
1. |
|
lcontinuity_neutral |
logical |
.true. |
|
lneutraldensity_nolog |
(not found) |
||
lnrhon0 |
real |
0. |
|
lnrhon_const |
real |
0. |
|
lnrhon_left |
real |
0. |
|
lnrhon_right |
real |
0. |
|
lpretend_star |
logical |
.false. |
|
lramp_up |
logical |
.false. |
|
luse_as_ionization |
logical |
.false. |
|
rhon_const |
real |
1. |
|
rhon_left |
real |
1. |
|
rhon_right |
real |
1. |
|
star_form_exponent |
real |
1.5 |
|
star_form_threshold |
real |
1. |
|
zeta |
real |
0. |
Module neutralvelocity.f90
The following variables are part of the neutralvelocity_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl_unx |
real |
0.0 |
|
ampl_uny |
real |
0.0 |
|
ampl_unz |
real |
0.0 |
|
ampluun |
real, dimension (ninit) |
0.0 |
|
colldrag |
real |
0 |
|
csn0 |
real |
0. |
|
inituun |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
kx_uun |
real |
1. |
|
ky_uun |
real |
1. |
|
kz_uun |
real |
1. |
|
ladvection_velocity |
logical |
.true. |
|
lcentrifugal_force |
logical |
.false. |
|
lcoriolis_force |
logical |
.true. |
|
Omega |
(not found) |
||
rnoise_ext |
real |
||
rnoise_int |
real |
||
uun_const |
real, dimension(3) |
(/0.,0.,0./) |
|
uun_left |
real |
0. |
|
uun_right |
real |
0. |
|
widthuun |
real |
.1 |
Module noselfgravity.f90
The following variables are part of the selfgrav_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
gravitational_const |
real |
real(G_Newton_cgs) |
Module NSCBC.f90
The following variables are part of the NSCBC_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
inlet_from_file |
logical |
.false. |
|
inlet_zz1 |
real |
0. |
|
inlet_zz2 |
real |
0. |
|
jet_center |
real, dimension(2) |
(/0.,0./) |
|
jet_inlet |
logical |
.false. |
|
momentum_thickness |
real, dimension(2) |
(/0.014,0.0182/) |
|
nscbc_bc |
character(len=2*nscbc_len+1), dimension(3) |
‘’ |
|
nscbc_sigma_in |
real |
1. |
|
nscbc_sigma_out |
real |
1. |
|
p_infty |
real |
1. |
|
radius_profile |
real, dimension(2) |
(/0.0182,0.0364/) |
|
turb_inlet_dir |
character(len=fnlen) |
‘’ |
|
turb_inlet_file |
character(len=fnlen) |
‘var.dat’ |
|
turb_profile_mag |
real |
1.0 |
|
velocity_ratio |
real |
3.3 |
|
zz_profile |
character (len=labellen), dimension(ninit) |
‘nothing’ |
Module particles_adsorbed.f90
The following variables are part of the particles_ads_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
dpads |
real |
0.0 |
|
init_adsorbed |
character(len=labellen), dimension(ninit) |
‘nothing’ |
|
init_surf_ads_frac |
real, dimension(10) |
||
lexperimental_adsorbed |
logical |
.false. |
Module particles_breakup.f90
The following variables are part of the particles_breakup_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
c_bu |
real |
0.0 |
Aguerre-Nigro / Li et al. constant |
d_inj |
real |
0.0 |
injector orifice diameter [cm] |
hg_C1 |
real |
0.1 |
|
hg_C2 |
real |
2.0 |
|
hg_C3 |
real |
1.2 |
|
hg_C4 |
real |
0.4 |
|
hg_C5 |
real |
5.0 |
|
hg_C6 |
real |
2.0 |
|
hg_Cmu |
real |
0.09 |
|
hg_k1 |
real |
0.175 |
|
hg_Ke |
real |
0.27 |
|
hg_Li |
real |
0.0 |
|
hg_Ui |
real |
0.0 |
|
kh_B0 |
real |
0.61 |
|
kh_B1 |
real |
40.0 |
|
kh_B2 |
real |
0.05 |
|
kh_min_child_npswarm |
real |
0.0 |
|
kh_we_min |
real |
0.0 |
|
lhg_turb_decay |
logical |
.true. |
|
lparticles_breakup_hg |
logical |
.false. |
|
lparticles_breakup_kh |
logical |
.false. |
|
lparticles_breakup_pe |
logical |
.false. |
|
lparticles_breakup_rt |
logical |
.false. |
|
lprint_breakup_mode |
logical |
.false. |
|
nu_liq |
real |
1e-2 |
PAR_DOC: kinematic viscosity of the liquid (in cgs units) |
pe_child_factor |
real |
0.5 |
child-parcel size as a fraction of d_max |
pe_floor_diameter |
real |
1.0e-12 |
|
pe_max_shrink_ratio |
real |
0.0001 |
|
pe_min_diameter |
real |
1.0e-12 |
|
pe_we_crit |
real |
12.0 |
base critical Weber number, Eq. (5) |
rt_CRT |
real |
0.1 |
|
rt_Ctau |
real |
1.0 |
|
rt_method |
integer |
2 |
|
rt_we_min |
real |
0.0 |
|
sigma_liq |
real |
7.2e-2 |
|
tstart_particles_breakup |
real |
0.0 |
|
z_inj |
real |
0.0 |
injector axial position [cm] |
Module particles_caustics.f90
The following variables are part of the particles_caustics_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
dummy |
integer |
Module particles_charged.f90
The following variables are part of the particles_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplvvp |
real |
0.0 |
|
bcpx |
(not found) |
||
bcpy |
(not found) |
||
bcpz |
(not found) |
||
delta_vp0 |
real |
0. |
|
dust_charge |
real |
1. |
|
initvvp |
character (len=labellen), dimension (ninit) |
‘nothing’ |
|
initxxp |
character (len=labellen), dimension (ninit) |
‘nothing’ |
|
lcheck_exact_frontier |
(not found) |
||
linsert_particles_continuously |
(not found) |
||
lnocalc_rhop |
(not found) |
||
lonly_eforce |
logical |
.false. |
|
lparticlemesh_cic |
(not found) |
||
lstokes_drag |
logical |
.false. |
|
Lx0 |
real |
0.0 |
|
Ly0 |
real |
0.0 |
|
Lz0 |
real |
0.0 |
|
rhodust |
real |
1. |
|
vpx0 |
real |
0.0 |
|
vpy0 |
real |
0.0 |
|
vpz0 |
real |
0.0 |
|
xp0 |
real |
0.0 |
|
yp0 |
real |
0.0 |
|
zp0 |
real |
0.0 |
Module particles_chemistry.f90
The following variables are part of the particles_chem_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
diffusivity |
real |
0.0 |
|
lbaum_and_street |
logical |
.false. |
RUN_DOC: Analytical calculation of surface gas fraction |
lheat_per_pencil |
logical |
.false. |
|
lpchem_debug |
logical |
.false. |
|
lpreactions |
logical |
.true. |
|
lsherwood_const |
logical |
.false. |
RUN_DOC: constant sherwood number (2 for quiescent flow) |
lsurface_nopores |
logical |
.false. |
RUN_DOC: reactive surface just surface of sphere |
reaction_enhancement |
real, dimension(50) |
1.0 |
|
Sgc_init |
real |
3e6 |
cm^2/g |
startup_time |
real |
0. |
INIT_DOC: Length of startup time for reactions |
structural_parameter |
real |
8. |
[-] can be 8, seems not right |
tortuosity |
real |
3. |
INIT_DOC: Particle pore tortuosity |
total_carbon_sites |
real, target |
1.08e-8 |
[mol/cm^2] |
true_density_carbon |
real, target |
1.800 |
g/cm^3 |
Module particles_density.f90
The following variables are part of the particles_dens_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
eps_dtog |
(not found) |
||
gravr_swarm0 |
real |
1.0 |
|
gravr_swarm1 |
real |
1.0 |
|
initrhopswarm |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
rhop_swarm0 |
real |
1.0 |
|
rhop_swarm1 |
real |
1.0 |
|
rhop_swarm2 |
real |
1.0 |
|
rhop_swarm3 |
real |
1.0 |
Module particles_drag.f90
The following variables are part of the particles_drag_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
gx_gas |
real, target |
0.0 |
Background acceleration of gas in x direction |
gz_par_coeff |
real |
0.0 |
Coefficient for background acceleration of a particle in z direction |
ldrag_equilibrium_global |
logical |
.false. |
Set global/local drag equilibrium when lset_drag_equilibrium = .true. |
ldrag_on_gas |
logical, target |
.false. |
Turn on/off drag on gas |
ldrag_on_par |
logical |
.false. |
Turn on/off drag on particles |
lset_drag_equilibrium |
logical |
.false. |
Initialize the velocities of the particles and the gas under equilibrium |
taus |
real, target |
0.0 |
Dimensionless stopping time: Omega * tdrag |
tdrag |
real |
0.0 |
Drag timescale |
Module particles_dust.f90
The following variables are part of the particles_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
a_ellipsoid |
real |
0.0 |
|
amplvvp |
real |
0.0 |
|
amplxxp |
real |
0.0 |
|
b_ellipsoid |
real |
0.0 |
|
bcpx |
(not found) |
||
bcpy |
(not found) |
||
bcpz |
(not found) |
||
beta_dPdr_dust |
real |
0.0 |
|
birthring_r |
real |
1.0 |
|
birthring_width |
real |
0.1 |
|
brownian_T0 |
real |
0.0 |
|
c_ellipsoid |
real |
0.0 |
|
coeff |
complex, dimension(7) |
(0.0,0.0) |
|
coeff_restitution |
real |
0.5 |
|
cond_ratio |
real |
0.0 |
|
cone_half_angle_deg |
real |
0.0 |
|
delta_vp0 |
real |
1.0 |
|
Deltauy_gas_friction |
real |
0.0 |
|
dustdensity_powerlaw |
(not found) |
||
eps1 |
real |
0.5 |
|
eps_dtog |
(not found) |
||
epsp_friction_increase |
real |
100.0 |
|
frac_init_particles |
real |
1.0 |
|
gab_width |
(not found) |
||
gaussian_x_frac |
real |
0.0 |
|
gravr |
real |
1.0 |
|
gravr_profile |
character(len=labellen) |
‘’ |
|
gravsmooth |
real |
0.0 |
|
gravx |
real |
0.0 |
|
gravx_profile |
character(len=labellen) |
‘’ |
|
gravz |
real |
0.0 |
|
gravz_profile |
character(len=labellen) |
‘’ |
|
initvvp |
character(len=labellen), dimension(ninit) |
‘nothing’ |
|
initxxp |
character(len=labellen), dimension(ninit) |
‘nothing’ |
|
interp_pol_gradTT |
character(len=labellen) |
‘ngp’ |
|
interp_pol_oo |
character(len=labellen) |
‘ngp’ |
|
interp_pol_pp |
character(len=labellen) |
‘ngp’ |
|
interp_pol_rho |
character(len=labellen) |
‘ngp’ |
|
interp_pol_species |
character(len=labellen) |
‘ngp’ |
|
interp_pol_TT |
character(len=labellen) |
‘ngp’ |
|
interp_pol_uu |
character(len=labellen) |
‘ngp’ |
|
kx_gg |
real |
1.0 |
|
kx_vpx |
real |
0.0 |
|
kx_vpy |
real |
0.0 |
|
kx_vpz |
real |
0.0 |
|
kx_vvp |
real |
0.0 |
|
kx_xxp |
real |
0.0 |
|
ky_vpx |
real |
0.0 |
|
ky_vpy |
real |
0.0 |
|
ky_vpz |
real |
0.0 |
|
ky_vvp |
real |
0.0 |
|
ky_xxp |
real |
0.0 |
|
kz_gg |
real |
1.0 |
|
kz_vpx |
real |
0.0 |
|
kz_vpy |
real |
0.0 |
|
kz_vpz |
real |
0.0 |
|
kz_vvp |
real |
0.0 |
|
kz_xxp |
real |
0.0 |
|
l_hole |
integer |
0 |
|
lbirthring_depletion |
logical |
.false. |
|
lbrownian_forces |
logical |
.false. |
|
lbrownian_forces_Li_Ahmadi |
logical |
.false. |
|
lcalc_uup |
logical |
.false. |
|
lcentrifugal_force_par |
logical |
.false. |
|
lcheck_exact_frontier |
(not found) |
||
lcoldstart_amplitude_correction |
logical |
.false. |
|
lcollisional_cooling_rms |
logical |
.false. |
|
lcollisional_cooling_taucool |
logical |
.false. |
|
lcollisional_cooling_twobody |
logical |
.false. |
|
lcollisional_dragforce_cooling |
logical |
.false. |
|
lcollisional_heat |
logical |
.false. |
|
lcompensate_friction_increase |
logical |
.false. |
|
lcondspec_details |
(not found) |
||
lcoriolis_force_par |
logical |
.true. |
|
ldragforce_dust_par |
logical |
.false. |
|
ldragforce_equi_global_eps |
logical |
.false. |
|
ldragforce_gas_par |
logical, target |
.false. |
|
ldragforce_heat |
logical |
.false. |
|
ldragforce_radialonly |
logical |
.false. |
|
ldragforce_stiff |
logical |
.false. |
|
ldraglaw_eps_stk_transonic |
logical |
.false. |
|
ldraglaw_epstein |
logical |
.true. |
|
ldraglaw_epstein_stokes_linear |
logical |
.false. |
|
ldraglaw_epstein_transonic |
logical |
.false. |
|
ldraglaw_purestokes |
logical |
.false. |
|
ldraglaw_simple |
logical |
.false. |
|
ldraglaw_steadystate |
logical |
.false. |
|
ldraglaw_stokesschiller |
logical |
.false. |
|
ldt_adv_par |
logical |
.true. |
|
ldt_grav_par |
logical |
.true. |
|
lenforce_policy |
logical |
.false. |
|
lgaussian_birthring |
logical |
.false. |
|
lglobalrandom |
logical |
.false. |
|
lignore_rhop_swarm |
(not found) |
||
linsert_particles_continuously |
(not found) |
||
linterpolate_spline |
(not found) |
||
lmigration_real_check |
(not found) |
||
lmigration_redo |
(not found) |
||
lnocalc_np |
(not found) |
||
lnocalc_rhop |
(not found) |
||
lnocollapse_xdir_onecell |
(not found) |
||
lnocollapse_ydir_onecell |
(not found) |
||
lnocollapse_zdir_onecell |
(not found) |
||
lnostore_uu |
logical |
.true. |
|
lnp_ap_as_aux |
logical |
.false. |
|
lparticle_gravity |
logical |
.true. |
|
lparticlemesh_cic |
(not found) |
||
lparticlemesh_pqs_assignment |
(not found) |
||
lparticlemesh_tsc |
(not found) |
||
lpartnucleation |
(not found) |
||
lrandom_particle_pencils |
(not found) |
||
lreassign_strat_rhom |
logical |
.true. |
|
lsinkparticle_1 |
(not found) |
||
lsinkpoint |
logical |
.false. |
|
lswap_radius_and_number |
(not found) |
||
ltau_coll_min_courant |
logical |
.true. |
|
lthermophoretic_forces |
logical |
.false. |
|
lvector_gravity |
logical |
.false. |
|
lwithhold_init_particles |
logical |
.false. |
|
Lx0 |
real |
0.0 |
|
Ly0 |
real |
0.0 |
|
Lz0 |
real |
0.0 |
|
m_hole |
integer |
0 |
|
mean_free_path_gas |
real |
0.0 |
|
mp_swarm |
(not found) |
||
mpmat |
(not found) |
||
n_hole |
integer |
0 |
|
np_const |
(not found) |
||
np_swarm |
(not found) |
||
nu_epicycle |
real |
0.0 |
|
particle_mesh |
(not found) |
||
particle_radius |
(not found) |
||
phase_vpx |
real |
0.0 |
|
phase_vpy |
real |
0.0 |
|
phase_vpz |
real |
0.0 |
|
pos_ellipsoid |
real, dimension(3) |
(/0.0,0.0,0.0/) |
|
pos_sphere |
real, dimension(3) |
(/0.0,0.0,0.0/) |
|
qgaussz |
real |
0.0 |
|
r0gaussz |
real |
1.0 |
|
rad_sphere |
real |
0.0 |
|
remove_particle_at_time |
(not found) |
||
remove_particle_criteria |
(not found) |
||
remove_particle_criteria_edtog |
(not found) |
||
remove_particle_criteria_size |
(not found) |
||
rhop_const |
(not found) |
||
rhop_swarm |
(not found) |
||
rhopmat |
(not found) |
||
Ri0 |
real |
0.25 |
|
rp_ext |
(not found) |
||
rp_ext_width |
(not found) |
||
rp_int |
(not found) |
||
rpbeta |
real |
0.0 |
|
rpbeta_species |
real, target, dimension(npar_species) |
0.0 |
|
rpinit_ext |
real |
||
rpinit_int |
real |
||
rsinkparticle_1 |
(not found) |
||
rsinkpoint |
real |
0.0 |
|
tau_coll_min |
real |
0.0 |
|
taucool |
real |
0.0 |
|
tausg_min |
real |
0.0 |
|
tausp |
real, target |
0.0 |
|
tausp_species |
real, target, dimension(npar_species) |
0.0 |
|
temp_grad0 |
real, dimension(3) |
(/0.0,0.0,0.0/) |
|
thermophoretic_eq |
character(len=labellen) |
‘nothing’ |
|
thermophoretic_T0 |
real |
0.0 |
|
tstart_brownian_par |
real |
0.0 |
|
tstart_collisional_cooling |
real |
0.0 |
|
tstart_dragforce_par |
real |
0.0 |
|
tstart_grav_par |
real |
0.0 |
|
tstart_grav_r_par |
real |
0.0 |
|
tstart_grav_x_par |
real |
0.0 |
|
tstart_grav_z_par |
real |
0.0 |
|
tstart_liftforce_par |
real |
0.0 |
|
tstart_sink_par |
real |
0.0 |
|
vpx0 |
real |
0.0 |
|
vpx1 |
real |
0.0 |
|
vpx2 |
real |
0.0 |
|
vpx3 |
real |
0.0 |
|
vpy0 |
real |
0.0 |
|
vpy1 |
real |
0.0 |
|
vpy2 |
real |
0.0 |
|
vpy3 |
real |
0.0 |
|
vpz0 |
real |
0.0 |
|
vpz1 |
real |
0.0 |
|
vpz2 |
real |
0.0 |
|
vpz3 |
real |
0.0 |
|
xp0 |
real |
0.0 |
|
xp1 |
real |
0.0 |
|
xp2 |
real |
0.0 |
|
xp3 |
real |
0.0 |
|
xsinkpoint |
real |
0.0 |
|
yp0 |
real |
0.0 |
|
yp1 |
real |
0.0 |
|
yp2 |
real |
0.0 |
|
yp3 |
real |
0.0 |
|
ysinkpoint |
real |
0.0 |
|
zp0 |
real |
0.0 |
|
zp1 |
real |
0.0 |
|
zp2 |
real |
0.0 |
|
zp3 |
real |
0.0 |
|
zsinkpoint |
real |
0.0 |
Module particles_dust_blocks.f90
The following variables are part of the particles_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
a_ellipsoid |
real |
0.0 |
|
amplvvp |
real |
0.0 |
|
amplxxp |
real |
0.0 |
|
b_ellipsoid |
real |
0.0 |
|
bcpx |
(not found) |
||
bcpy |
(not found) |
||
bcpz |
(not found) |
||
beta_dPdr_dust |
real |
0.0 |
|
c_ellipsoid |
real |
0.0 |
|
delta_vp0 |
real |
1.0 |
|
dustdensity_powerlaw |
(not found) |
||
eps1 |
real |
0.5 |
|
eps_dtog |
(not found) |
||
epsp_friction_increase |
real |
0.0 |
|
gravr |
real |
1.0 |
|
gravr_profile |
character (len=labellen) |
‘’ |
|
gravsmooth |
real |
0.0 |
|
gravx |
real |
0.0 |
|
gravx_profile |
character (len=labellen) |
‘’ |
|
gravz |
real |
0.0 |
|
gravz_profile |
character (len=labellen) |
‘’ |
|
initvvp |
character (len=labellen), dimension (ninit) |
‘nothing’ |
|
initxxp |
character (len=labellen), dimension (ninit) |
‘nothing’ |
|
it1_loadbalance |
(not found) |
||
kx_gg |
real |
1.0 |
|
kx_vpx |
real |
0.0 |
|
kx_vpy |
real |
0.0 |
|
kx_vpz |
real |
0.0 |
|
kx_vvp |
real |
0.0 |
|
kx_xxp |
real |
0.0 |
|
ky_vpx |
real |
0.0 |
|
ky_vpy |
real |
0.0 |
|
ky_vpz |
real |
0.0 |
|
ky_vvp |
real |
0.0 |
|
ky_xxp |
real |
0.0 |
|
kz_gg |
real |
1.0 |
|
kz_vpx |
real |
0.0 |
|
kz_vpy |
real |
0.0 |
|
kz_vpz |
real |
0.0 |
|
kz_vvp |
real |
0.0 |
|
kz_xxp |
real |
0.0 |
|
ladopt_own_light_bricks |
(not found) |
||
lbrick_partition |
(not found) |
||
lcalc_uup |
logical |
.false. |
|
lcentrifugal_force_par |
logical |
.false. |
|
lcheck_exact_frontier |
(not found) |
||
lcommunicate_np |
(not found) |
||
lcommunicate_rhop |
(not found) |
||
lcoriolis_force_par |
logical |
.true. |
|
ldragforce_dust_par |
logical |
.false. |
|
ldragforce_equi_global_eps |
logical |
.false. |
|
ldragforce_gas_par |
logical, target |
.false. |
|
ldraglaw_eps_stk_transonic |
logical |
.false. |
|
ldraglaw_epstein |
logical |
.true. |
|
ldraglaw_variable |
logical |
.false. |
|
ldt_adv_par |
logical |
.true. |
|
ldt_grav_par |
logical |
.false. |
|
learly_particle_map |
logical |
.true. |
|
lglobalrandom |
logical |
.false. |
|
linsert_particles_continuously |
(not found) |
||
linterpolate_spline |
(not found) |
||
lmigration_real_check |
(not found) |
||
lmigration_redo |
(not found) |
||
lnocalc_np |
(not found) |
||
lnocalc_rhop |
(not found) |
||
lparticlemesh_cic |
(not found) |
||
lparticlemesh_tsc |
(not found) |
||
lrandom_particle_blocks |
(not found) |
||
lrandom_particle_pencils |
(not found) |
||
lreassign_strat_rhom |
logical |
.true. |
|
lreblock_particles_run |
(not found) |
||
lsinkpoint |
logical |
.false. |
|
luse_tau_ap |
logical |
.true. |
|
Lx0 |
real |
0.0 |
|
Ly0 |
real |
0.0 |
|
Lz0 |
real |
0.0 |
|
mean_free_path_gas |
real |
0.0 |
|
mpmat |
(not found) |
||
np_const |
(not found) |
||
np_swarm |
(not found) |
||
nu_epicycle |
real |
0.0 |
|
particle_mesh |
(not found) |
||
phase_vpx |
real |
0.0 |
|
phase_vpy |
real |
0.0 |
|
phase_vpz |
real |
0.0 |
|
pos_ellipsoid |
real, dimension (3) |
(/0.0,0.0,0.0/) |
|
pos_sphere |
real, dimension (3) |
(/0.0,0.0,0.0/) |
|
rad_sphere |
real |
0.0 |
|
remove_particle_at_time |
(not found) |
||
remove_particle_criteria |
(not found) |
||
remove_particle_criteria_edtog |
(not found) |
||
remove_particle_criteria_size |
(not found) |
||
rhop_const |
(not found) |
||
rhop_swarm |
(not found) |
||
rhopmat |
(not found) |
||
Ri0 |
real |
0.25 |
|
rp_ext |
(not found) |
||
rp_int |
(not found) |
||
rpinit_ext |
real |
||
rpinit_int |
real |
||
rsinkpoint |
real |
0.0 |
|
tausp |
real, target |
0.0 |
|
tausp_species |
real, dimension(npar_species), target |
0.0 |
|
tstart_dragforce_par |
real |
0.0 |
|
tstart_grav_par |
real |
0.0 |
|
vpx0 |
real |
0.0 |
|
vpx1 |
real |
0.0 |
|
vpx2 |
real |
0.0 |
|
vpx3 |
real |
0.0 |
|
vpy0 |
real |
0.0 |
|
vpy1 |
real |
0.0 |
|
vpy2 |
real |
0.0 |
|
vpy3 |
real |
0.0 |
|
vpz0 |
real |
0.0 |
|
vpz1 |
real |
0.0 |
|
vpz2 |
real |
0.0 |
|
vpz3 |
real |
0.0 |
|
xp0 |
real |
0.0 |
|
xp1 |
real |
0.0 |
|
xp2 |
real |
0.0 |
|
xp3 |
real |
0.0 |
|
xsinkpoint |
real |
0.0 |
|
yp0 |
real |
0.0 |
|
yp1 |
real |
0.0 |
|
yp2 |
real |
0.0 |
|
yp3 |
real |
0.0 |
|
ysinkpoint |
real |
0.0 |
|
zp0 |
real |
0.0 |
|
zp1 |
real |
0.0 |
|
zp2 |
real |
0.0 |
|
zp3 |
real |
0.0 |
|
zsinkpoint |
real |
0.0 |
Module particles_eikonal.f90
The following variables are part of the particles_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
a_ellipsoid |
real |
0.0 |
|
amplvvp |
real |
0.0 |
|
amplxxp |
real |
0.0 |
|
b_ellipsoid |
real |
0.0 |
|
bcpx |
(not found) |
||
bcpy |
(not found) |
||
bcpz |
(not found) |
||
beta_dPdr_dust |
real |
0.0 |
|
brownian_T0 |
real |
0.0 |
|
c_ellipsoid |
real |
0.0 |
|
coeff |
complex, dimension (7) |
(0.0,0.0) |
|
coeff_restitution |
real |
0.5 |
|
cond_ratio |
real |
0.0 |
|
delta_vp0 |
real |
1.0 |
|
Deltauy_gas_friction |
real |
0.0 |
|
dustdensity_powerlaw |
(not found) |
||
eps1 |
real |
0.5 |
|
eps_dtog |
(not found) |
||
epsp_friction_increase |
real |
100.0 |
|
gravr |
real |
1.0 |
|
gravr_profile |
character (len=labellen) |
‘’ |
|
gravsmooth |
real |
0.0 |
|
gravx |
real |
0.0 |
|
gravx_profile |
character (len=labellen) |
‘’ |
|
gravz |
real |
0.0 |
|
gravz_profile |
character (len=labellen) |
‘’ |
|
initvvp |
character (len=labellen), dimension (ninit) |
‘nothing’ |
|
initxxp |
character (len=labellen), dimension (ninit) |
‘nothing’ |
|
interp_pol_gradTT |
character (len=labellen) |
‘ngp’ |
|
interp_pol_oo |
character (len=labellen) |
‘ngp’ |
|
interp_pol_rho |
character (len=labellen) |
‘ngp’ |
|
interp_pol_TT |
character (len=labellen) |
‘ngp’ |
|
interp_pol_uu |
character (len=labellen) |
‘ngp’ |
|
kx_gg |
real |
1.0 |
|
kx_vpx |
real |
0.0 |
|
kx_vpy |
real |
0.0 |
|
kx_vpz |
real |
0.0 |
|
kx_vvp |
real |
0.0 |
|
kx_xxp |
real |
0.0 |
|
ky_vpx |
real |
0.0 |
|
ky_vpy |
real |
0.0 |
|
ky_vpz |
real |
0.0 |
|
ky_vvp |
real |
0.0 |
|
ky_xxp |
real |
0.0 |
|
kz_gg |
real |
1.0 |
|
kz_vpx |
real |
0.0 |
|
kz_vpy |
real |
0.0 |
|
kz_vpz |
real |
0.0 |
|
kz_vvp |
real |
0.0 |
|
kz_xxp |
real |
0.0 |
|
l_hole |
integer |
0 |
|
lbrownian_forces |
logical |
.false. |
|
lcalc_uup |
logical |
.false. |
|
lcentrifugal_force_par |
logical |
.false. |
|
lcheck_exact_frontier |
(not found) |
||
lcoldstart_amplitude_correction |
logical |
.false. |
|
lcollisional_cooling_rms |
logical |
.false. |
|
lcollisional_cooling_taucool |
logical |
.false. |
|
lcollisional_cooling_twobody |
logical |
.false. |
|
lcollisional_dragforce_cooling |
logical |
.false. |
|
lcollisional_heat |
logical |
.false. |
|
lcoriolis_force_par |
logical |
.true. |
|
ldragforce_dust_par |
logical |
.false. |
|
ldragforce_equi_global_eps |
logical |
.false. |
|
ldragforce_equi_noback |
logical |
.false. |
|
ldragforce_gas_par |
logical |
.false. |
|
ldragforce_heat |
logical |
.false. |
|
ldragforce_radialonly |
logical |
.false. |
|
ldragforce_stiff |
logical |
.false. |
|
ldraglaw_eps_stk_transonic |
logical |
.false. |
|
ldraglaw_epstein |
logical |
.true. |
|
ldraglaw_epstein_stokes_linear |
logical |
.false. |
|
ldraglaw_epstein_transonic |
logical |
.false. |
|
ldraglaw_simple |
logical |
.false. |
|
ldraglaw_steadystate |
logical |
.false. |
|
ldt_adv_par |
logical |
.true. |
|
ldt_grav_par |
logical |
.true. |
|
lenforce_policy |
logical |
.false. |
|
lglobalrandom |
logical |
.false. |
|
linsert_particles_continuously |
(not found) |
||
linterpolate_spline |
(not found) |
||
lleft_down |
logical |
.false. |
|
lmigration_real_check |
(not found) |
||
lmigration_redo |
(not found) |
||
lnocalc_np |
(not found) |
||
lnocalc_rhop |
(not found) |
||
lnostore_uu |
logical |
.true. |
|
lparticlemesh_cic |
(not found) |
||
lparticlemesh_tsc |
(not found) |
||
lrandom_particle_pencils |
(not found) |
||
lreassign_strat_rhom |
logical |
.true. |
|
ltau_coll_min_courant |
logical |
.true. |
|
Lx0 |
real |
0.0 |
|
Ly0 |
real |
0.0 |
|
Lz0 |
real |
0.0 |
|
m_hole |
integer |
0 |
|
mean_free_path_gas |
real |
0.0 |
|
mp_swarm |
(not found) |
||
mpmat |
(not found) |
||
n_hole |
integer |
0 |
|
np_const |
(not found) |
||
np_swarm |
(not found) |
||
nray |
integer |
1 |
|
nu_epicycle |
real |
0.0 |
|
particle_radius |
(not found) |
||
phase_vpx |
real |
0.0 |
|
phase_vpy |
real |
0.0 |
|
phase_vpz |
real |
0.0 |
|
pos_ellipsoid |
real, dimension (3) |
(/0.0,0.0,0.0/) |
|
pos_sphere |
real, dimension (3) |
(/0.0,0.0,0.0/) |
|
rad_sphere |
real |
0.0 |
|
rhop_const |
(not found) |
||
rhop_swarm |
(not found) |
||
rhopmat |
(not found) |
||
Ri0 |
real |
0.25 |
|
rp_ext |
(not found) |
||
rp_int |
(not found) |
||
sphere_theta1 |
real |
0.0 |
|
sphere_theta2 |
real |
0.0 |
|
tau_coll_min |
real |
0.0 |
|
taucool |
real |
0.0 |
|
tausg_min |
real |
0.0 |
|
tausp |
real |
0.0 |
|
tausp_species |
real, target, dimension (npar_species) |
0.0 |
|
temp_grad0 |
real, dimension (3) |
(/0.0,0.0,0.0/) |
|
tstart_brownian_par |
real |
0.0 |
|
tstart_collisional_cooling |
real |
0.0 |
|
tstart_dragforce_par |
real |
0.0 |
|
tstart_grav_par |
real |
0.0 |
|
tstart_grav_r_par |
real |
0.0 |
|
tstart_grav_x_par |
real |
0.0 |
|
tstart_grav_z_par |
real |
0.0 |
|
vpx0 |
real |
0.0 |
|
vpx1 |
real |
0.0 |
|
vpx2 |
real |
0.0 |
|
vpx3 |
real |
0.0 |
|
vpy0 |
real |
0.0 |
|
vpy1 |
real |
0.0 |
|
vpy2 |
real |
0.0 |
|
vpy3 |
real |
0.0 |
|
vpz0 |
real |
0.0 |
|
vpz1 |
real |
0.0 |
|
vpz2 |
real |
0.0 |
|
vpz3 |
real |
0.0 |
|
xp0 |
real |
0.0 |
|
xp1 |
real |
0.0 |
|
xp2 |
real |
0.0 |
|
xp3 |
real |
0.0 |
|
yp0 |
real |
0.0 |
|
yp1 |
real |
0.0 |
|
yp2 |
real |
0.0 |
|
yp3 |
real |
0.0 |
|
zp0 |
real |
0.0 |
|
zp1 |
real |
0.0 |
|
zp2 |
real |
0.0 |
|
zp3 |
real |
0.0 |
Module particles_lagrangian.f90
The following variables are part of the particles_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
a_ellipsoid |
real |
0.0 |
|
amplvvp |
real |
0.0 |
|
amplxxp |
real |
0.0 |
|
b_ellipsoid |
real |
0.0 |
|
bcpx |
(not found) |
||
bcpy |
(not found) |
||
bcpz |
(not found) |
||
beta_dPdr_dust |
real |
0.0 |
|
birthring_r |
real |
1.0 |
|
birthring_width |
real |
0.1 |
|
brownian_T0 |
real |
0.0 |
|
c_ellipsoid |
real |
0.0 |
|
coeff |
complex, dimension (7) |
(0.0,0.0) |
|
coeff_restitution |
real |
0.5 |
|
cond_ratio |
real |
0.0 |
|
delta_vp0 |
real |
1.0 |
|
Deltauy_gas_friction |
real |
0.0 |
|
dustdensity_powerlaw |
(not found) |
||
eps1 |
real |
0.5 |
|
epsp_friction_increase |
real |
100.0 |
|
frac_init_particles |
real |
1.0 |
|
gab_width |
(not found) |
||
gravr |
real |
1.0 |
|
gravr_profile |
character (len=labellen) |
‘’ |
|
gravsmooth |
real |
0.0 |
|
gravx |
real |
0.0 |
|
gravx_profile |
character (len=labellen) |
‘’ |
|
gravz |
real |
0.0 |
|
gravz_profile |
character (len=labellen) |
‘’ |
|
initvvp |
character (len=labellen), dimension (ninit) |
‘nothing’ |
|
initxxp |
character (len=labellen), dimension (ninit) |
‘nothing’ |
|
interp_pol_gradTT |
character (len=labellen) |
‘none’ |
|
interp_pol_oo |
character (len=labellen) |
‘none’ |
|
interp_pol_pp |
character (len=labellen) |
‘none’ |
|
interp_pol_rho |
character (len=labellen) |
‘none’ |
|
interp_pol_species |
character (len=labellen) |
‘none’ |
|
interp_pol_TT |
character (len=labellen) |
‘none’ |
|
interp_pol_uu |
character (len=labellen) |
‘none’ |
|
kx_gg |
real |
1.0 |
|
kx_vpx |
real |
0.0 |
|
kx_vpy |
real |
0.0 |
|
kx_vpz |
real |
0.0 |
|
kx_vvp |
real |
0.0 |
|
kx_xxp |
real |
0.0 |
|
ky_vpx |
real |
0.0 |
|
ky_vpy |
real |
0.0 |
|
ky_vpz |
real |
0.0 |
|
ky_vvp |
real |
0.0 |
|
ky_xxp |
real |
0.0 |
|
kz_gg |
real |
1.0 |
|
kz_vpx |
real |
0.0 |
|
kz_vpy |
real |
0.0 |
|
kz_vpz |
real |
0.0 |
|
kz_vvp |
real |
0.0 |
|
kz_xxp |
real |
0.0 |
|
l_hole |
integer |
0 |
|
lbirthring_depletion |
logical |
.false. |
|
lbrownian_forces |
logical |
.false. |
|
lcalc_uup |
logical |
.false. |
|
lcentrifugal_force_par |
logical |
.false. |
|
lcheck_exact_frontier |
(not found) |
||
lcoldstart_amplitude_correction |
logical |
.false. |
|
lcollisional_cooling_rms |
logical |
.false. |
|
lcollisional_cooling_taucool |
logical |
.false. |
|
lcollisional_cooling_twobody |
logical |
.false. |
|
lcollisional_dragforce_cooling |
logical |
.false. |
|
lcollisional_heat |
logical |
.false. |
|
lcompensate_friction_increase |
logical |
.false. |
|
lcoriolis_force_par |
logical |
.true. |
|
ldragforce_dust_par |
logical |
.false. |
|
ldragforce_equi_global_eps |
logical |
.false. |
|
ldragforce_equi_noback |
logical |
.false. |
|
ldragforce_gas_par |
logical |
.false. |
|
ldragforce_heat |
logical |
.false. |
|
ldragforce_radialonly |
logical |
.false. |
|
ldragforce_stiff |
logical |
.false. |
|
ldraglaw_eps_stk_transonic |
logical |
.false. |
|
ldraglaw_epstein |
logical |
.true. |
|
ldraglaw_epstein_stokes_linear |
logical |
.false. |
|
ldraglaw_epstein_transonic |
logical |
.false. |
|
ldraglaw_purestokes |
logical |
.false. |
|
ldraglaw_simple |
logical |
.false. |
|
ldraglaw_steadystate |
logical |
.false. |
|
ldraglaw_stokesschiller |
logical |
.false. |
|
ldt_adv_par |
logical |
.true. |
|
ldt_grav_par |
logical |
.true. |
|
lenforce_policy |
logical |
.false. |
|
lgaussian_birthring |
logical |
.false. |
|
lglobalrandom |
logical |
.false. |
|
linsert_particles_continuously |
(not found) |
||
linterpolate_spline |
(not found) |
||
lmigration_real_check |
(not found) |
||
lmigration_redo |
(not found) |
||
lnocalc_np |
(not found) |
||
lnocalc_rhop |
(not found) |
||
lnostore_uu |
logical |
.true. |
|
lparticle_gravity |
logical |
.true. |
|
lparticlemesh_pqs_assignment |
(not found) |
||
lrandom_particle_pencils |
(not found) |
||
lreassign_strat_rhom |
logical |
.true. |
|
lsinkparticle_1 |
(not found) |
||
lsinkpoint |
logical |
.false. |
|
ltau_coll_min_courant |
logical |
.true. |
|
lthermophoretic_forces |
logical |
.false. |
|
lvector_gravity |
logical |
.false. |
|
lwithhold_init_particles |
logical |
.false. |
|
Lx0 |
real |
0.0 |
|
Ly0 |
real |
0.0 |
|
Lz0 |
real |
0.0 |
|
m_hole |
integer |
0 |
|
mean_free_path_gas |
real |
0.0 |
|
mpmat |
(not found) |
||
n_hole |
integer |
0 |
|
np_const |
(not found) |
||
nu_epicycle |
real |
0.0 |
|
particle_mesh |
(not found) |
||
particle_radius |
(not found) |
||
phase_vpx |
real |
0.0 |
|
phase_vpy |
real |
0.0 |
|
phase_vpz |
real |
0.0 |
|
pos_ellipsoid |
real, dimension (3) |
(/0.0,0.0,0.0/) |
|
pos_sphere |
real, dimension (3) |
(/0.0,0.0,0.0/) |
|
rad_sphere |
real |
0.0 |
|
remove_particle_at_time |
(not found) |
||
remove_particle_criteria |
(not found) |
||
remove_particle_criteria_size |
(not found) |
||
rhop_const |
(not found) |
||
rhopmat |
(not found) |
||
Ri0 |
real |
0.25 |
|
rp_ext |
(not found) |
||
rp_int |
(not found) |
||
rpbeta |
real |
0.0 |
|
rpbeta_species |
real, target, dimension (npar_species) |
0.0 |
|
rsinkparticle_1 |
(not found) |
||
rsinkpoint |
real |
0.0 |
|
tau_coll_min |
real |
0.0 |
|
taucool |
real |
0.0 |
|
tausg_min |
real |
0.0 |
|
tausp |
real |
0.0 |
|
tausp_species |
real, target, dimension (npar_species) |
0.0 |
|
temp_grad0 |
real, dimension (3) |
(/0.0,0.0,0.0/) |
|
thermophoretic_eq |
character (len=labellen) |
‘nothing’ |
|
thermophoretic_T0 |
real |
0.0 |
|
tstart_brownian_par |
real |
0.0 |
|
tstart_collisional_cooling |
real |
0.0 |
|
tstart_dragforce_par |
real |
0.0 |
|
tstart_grav_par |
real |
0.0 |
|
tstart_grav_r_par |
real |
0.0 |
|
tstart_grav_x_par |
real |
0.0 |
|
tstart_grav_z_par |
real |
0.0 |
|
tstart_liftforce_par |
real |
0.0 |
|
tstart_sink_par |
real |
0.0 |
|
vpx0 |
real |
0.0 |
|
vpx1 |
real |
0.0 |
|
vpx2 |
real |
0.0 |
|
vpx3 |
real |
0.0 |
|
vpy0 |
real |
0.0 |
|
vpy1 |
real |
0.0 |
|
vpy2 |
real |
0.0 |
|
vpy3 |
real |
0.0 |
|
vpz0 |
real |
0.0 |
|
vpz1 |
real |
0.0 |
|
vpz2 |
real |
0.0 |
|
vpz3 |
real |
0.0 |
|
xp0 |
real |
0.0 |
|
xp1 |
real |
0.0 |
|
xp2 |
real |
0.0 |
|
xp3 |
real |
0.0 |
|
xsinkpoint |
real |
0.0 |
|
yp0 |
real |
0.0 |
|
yp1 |
real |
0.0 |
|
yp2 |
real |
0.0 |
|
yp3 |
real |
0.0 |
|
ysinkpoint |
real |
0.0 |
|
zp0 |
real |
0.0 |
|
zp1 |
real |
0.0 |
|
zp2 |
real |
0.0 |
|
zp3 |
real |
0.0 |
|
zsinkpoint |
real |
0.0 |
Module particles_lyapunov.f90
The following variables are part of the particles_lyapunov_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
bamp |
real |
1e-2 |
|
kmode_forb |
real |
3 |
|
linit_largeb |
logical |
.false. |
Module particles_mass.f90
The following variables are part of the particles_mass_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
init_particle_mass |
character(len=labellen), dimension(ninit) |
‘nothing’ |
|
ldiffm |
logical |
.false. |
|
ldiffuse_backreac |
logical |
.false. |
|
mass_const |
real |
0.0 |
Module particles_number.f90
The following variables are part of the particles_number_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
cdtpf |
real |
0.2 |
|
deltavp22_floor |
real |
0.0 |
|
initnpswarm |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
lfragmentation_par |
logical |
.false. |
|
np_swarm0 |
real |
1.0 |
|
np_swarm0_luck |
real |
1.0 |
|
rhop_swarm0 |
real |
1.0 |
|
tstart_fragmentation_par |
real |
0.0 |
|
vthresh_coagulation |
real |
0.0 |
Module particles_persistence.f90
The following variables are part of the particles_persistence_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
RR |
real,dimension(NPARTDISP) |
0.0 |
Module particles_potential.f90
The following variables are part of the particles_potential_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
arb_factor |
integer |
10 |
|
cell_in_grid |
integer |
1 |
|
fampl |
real |
1. |
|
lpotential |
logical |
||
Nbin_in_Rcutoff |
integer |
100 |
|
ppotential |
character (len=labellen) |
‘nothing’ |
|
psigma_by_dx |
real |
0.1 |
|
Rcutoff_in_grid |
integer |
1 |
|
rescale_diameter |
real |
1. |
|
sigma_in_grid |
integer |
1 |
|
skin_factor |
real |
2. |
Module particles_radius.f90
The following variables are part of the particles_radius_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
a0_initdist |
real |
5e-6 |
|
alpha |
real |
1. |
|
alpha_cond |
real |
1.0 |
|
ap0 |
real, dimension(ndustrad) |
0.0 |
|
ap1 |
real |
1.0 |
|
aphigh |
real |
2.0 |
|
aplow |
real |
1.0 |
|
apmid |
real |
1.5 |
|
apmin |
real |
0.0 |
|
b |
real |
1. |
|
cdtpc |
real |
0.2 |
|
cdtps |
real |
0.2 |
|
condensation_coefficient_type |
character(len=labellen) |
‘constant’ |
|
deltavp12_floor |
real |
0.0 |
|
diffusion_coefficient |
real |
1.0 |
|
eps_dtog |
(not found) |
||
initap |
character(len=labellen), dimension(ninit) |
‘nothing’ |
|
ip1 |
integer |
npar/2 |
|
labsorbing_species |
logical |
.false. |
|
lambda |
real |
1. |
|
lborder_driving_ocean |
logical |
.false. |
|
lcondensation_par |
logical |
.false. |
|
lcondensing_species |
(not found) |
||
ldroplet_evapcool |
logical |
.false. |
|
lfixed_particles_radius |
logical |
.false. |
|
lgas_enthalpy_flux |
logical |
.false. |
|
llatent_heat |
logical |
.true. |
|
lparticles_radius_rpbeta |
(not found) |
||
lsherwood_film |
logical |
.false. |
|
lsweepup_par |
logical |
.false. |
|
mbar |
real |
1.0 |
|
n0 |
real |
1. |
|
nbin_initdist |
integer |
20 |
|
qplaw |
real |
0.0 |
|
radii_distribution |
real, dimension(ndustrad) |
0.0 |
|
rhopmat |
(not found) |
||
rpbeta0 |
real |
0.0 |
|
rr_d |
real |
0.0 |
|
rr_q |
real |
2.5 |
|
sigma_initdist |
real |
0.2 |
|
tau_damp_evap |
real |
0.0 |
|
tau_ocean_driving |
real |
0.0 |
|
tstart_sweepup_par |
real |
0.0 |
|
TTocean |
real |
300.0 |
|
vthresh_sweepup |
real |
-1.0 |
|
ztop_ocean |
real |
0.0 |
Module particles_selfgravity.f90
The following variables are part of the particles_selfgrav_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
lnopartingrav |
logical |
.false. |
|
lselfgravity_particles |
logical |
.true. |
Module particles_sink.f90
The following variables are part of the particles_sink_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
aps0 |
real |
0.0 |
|
aps1 |
real |
0.0 |
|
aps2 |
real |
0.0 |
|
aps3 |
real |
0.0 |
|
bondi_accretion_grav_smooth |
real |
1.35 |
|
cdtsubgrid |
real |
0.1 |
|
initaps |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
laccrete_sink_sink |
logical |
.true. |
|
lbondi_accretion |
logical |
.false. |
|
ldebug_subgrid_accretion |
logical |
.false. |
|
lrhop_roche_unit |
logical |
.false. |
|
lselfgravity_sinkparticles |
logical |
.true. |
|
lsink_communication_all_to_all |
logical |
.false. |
|
lsink_radius_dx_unit |
logical |
.false. |
|
lsubgrid_accretion |
logical |
.false. |
|
rhop_sink_create |
real |
-1.0 |
|
rsurf_subgrid |
real |
0.001 |
|
rsurf_to_rhill |
real |
0.0 |
|
sink_birth_radius |
real |
1.0 |
Module particles_spin.f90
The following variables are part of the particles_spin_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplsp |
real, dimension(ninit) |
0.0 |
|
initsp |
character(len=labellen), dimension(ninit) |
‘nothing’ |
|
lmagnus_lift |
logical |
.false. |
|
lsaffman_lift |
logical |
.false. |
Module particles_stalker.f90
The following variables are part of the particles_stalker_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
dstalk |
real |
0.1 |
PAR_DOC: times between printout of stalker data |
linterpolate_cic |
logical |
.false. |
|
linterpolate_tsc |
logical |
.true. |
|
lstalk_ap |
logical |
.true. |
PAR_DOC: particles diameter |
lstalk_aps |
logical |
.true. |
|
lstalk_bb |
logical |
.true. |
PAR_DOC: magnetic field at particles position |
lstalk_grho |
logical |
.false. |
PAR_DOC: gas density gradient at particles position |
lstalk_gTT |
logical |
.false. |
|
lstalk_guu |
logical |
.false. |
PAR_DOC: gas velocity gradient at particles position |
lstalk_npswarm |
logical |
.false. |
|
lstalk_potself |
logical |
.true. |
|
lstalk_relvel |
logical |
.false. |
PAR_DOC: particles relative velocity to gas |
lstalk_rho |
logical |
.true. |
PAR_DOC: gas density at particles position |
lstalk_rhopswarm |
logical |
.true. |
|
lstalk_sink_particles |
logical |
.false. |
|
lstalk_uu |
logical |
.true. |
PAR_DOC: gas velocity at particles position |
lstalk_vv |
logical |
.true. |
PAR_DOC: particles velocity |
lstalk_xx |
logical |
.true. |
PAR_DOC: particles position |
Module particles_surfspec.f90
The following variables are part of the particles_surf_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
init_surf |
character(len=labellen), dimension(ninit) |
‘nothing’ |
|
init_surf_mol_frac |
real, dimension(10) |
INIT_DOC: Initial surface fraction |
Module particles_temperature.f90
The following variables are part of the particles_TT_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
cp_part |
real |
0.711e7 |
wolframalpha, erg/(g*K) |
emissivity |
real |
0.0 |
|
init_part_temp |
real |
0. |
|
init_particle_temperature |
character(len=labellen), dimension(ninit) |
‘nothing’ |
|
ldiffTT |
logical |
.false. |
|
ldiffuse_backtemp |
logical |
.false. |
Module particles_tetrad.f90
The following variables are part of the particles_tetrad_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
rsmall |
real |
1e-6 |
Module particles_tracers.f90
The following variables are part of the particles_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
bcpx |
(not found) |
||
bcpy |
(not found) |
||
bcpz |
(not found) |
||
eps_dtog |
(not found) |
||
gravz_profile |
character (len=labellen) |
‘zero’ |
|
initxxp |
character (len=labellen), dimension (ninit) |
‘nothing’ |
|
ldragforce_equi_global_eps |
logical |
.false. |
|
lglobalrandom |
logical |
.false. |
|
lparticlemesh_cic |
(not found) |
||
lparticlemesh_tsc |
(not found) |
||
lquadratic_interpolation |
logical |
.false. |
|
ltrace_dust |
logical |
.false. |
|
nu_epicycle |
real |
0.0 |
|
tausp |
real |
0.0 |
|
xp0 |
real |
0.0 |
|
yp0 |
real |
0.0 |
|
zp0 |
real |
0.0 |
Module pointmasses.f90
The following variables are part of the pointmasses_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
accrete_hills_frac |
real, dimension(nqpar) |
0.2 |
|
bcqx |
character (len=2*bclen+1) |
‘p’ |
|
bcqy |
character (len=2*bclen+1) |
‘p’ |
|
bcqz |
character (len=2*bclen+1) |
‘p’ |
|
cdtq |
real |
0.1 |
|
density_scale |
real |
0.001 |
|
eccentricity |
real |
0.0 |
|
final_ramped_mass |
real, dimension(nqpar) |
0.0 |
|
frac_smooth |
real, dimension(nqpar) |
0.4 |
|
GNewton |
real |
||
initvvq |
character (len=labellen) |
‘nothing’ |
|
initxxq |
character (len=labellen) |
‘random’ |
|
ipotential_pointmass |
character (len=labellen), dimension (nqpar) |
‘newton’ |
|
iprimary |
integer |
1 |
|
laccretion |
logical, dimension(nqpar) |
.false. |
|
lcorrect_gasgravity_lstart |
logical |
.false. |
|
lcylindrical_gravity_nbody |
logical, dimension(nqpar) |
.false. |
|
ldt_pointmasses |
logical |
.true. |
|
ldust_gravity |
logical |
.false. |
|
lexclude_frozen |
logical |
.false. |
|
lgas_gravity |
logical |
.true. |
|
lramp |
logical |
.false. |
|
lretrograde |
logical |
.false. |
|
pmass |
real, dimension(nqpar) |
0.0 |
|
r_smooth |
real, dimension(nqpar) |
||
ramp_orbits |
integer |
5 |
|
semimajor_axis |
real |
1.0 |
|
vxq0 |
real, dimension(nqpar) |
0.0 |
|
vyq0 |
real, dimension(nqpar) |
0.0 |
|
vzq0 |
real, dimension(nqpar) |
0.0 |
|
xq0 |
real, dimension(nqpar) |
0.0 |
|
yq0 |
real, dimension(nqpar) |
0.0 |
|
zq0 |
real, dimension(nqpar) |
0.0 |
Module poisson.f90
The following variables are part of the poisson_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
kmax |
real |
0.0 |
|
lexpand_grid |
logical |
.false. |
|
lisoz |
logical |
.false. |
|
lklimit_shear |
logical |
.false. |
|
lrazor_thin |
logical |
.false. |
|
lsemispectral |
logical |
.false. |
Module poisson_logspirals.f90
The following variables are part of the poisson_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
Bsmooth |
real |
0.01 |
|
Gnewton |
real |
G_Newton_cgs |
Module poisson_multigrid.f90
The following variables are part of the poisson_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
niter_poisson |
integer |
30 |
Module polymer.f90
The following variables are part of the polymer_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
initpoly |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
pamp |
real |
1. |
|
rod_dirn |
real, dimension(3) |
(/0.0,0.0,0.0/) |
Module pscalar.f90
The following variables are part of the pscalar_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplcc |
real |
0.1 |
|
ampllncc |
real |
0.1 |
|
ampllncc2 |
real |
0.0 |
|
cc_const |
real |
0.0 |
|
cc_min |
real |
0.0 |
|
delta_lncc |
real |
0 |
|
epsilon_lncc |
real |
0.0 |
|
initlncc |
character (len=labellen) |
‘zero’ |
|
initlncc2 |
character (len=labellen) |
‘zero’ |
|
kx_lncc |
real |
1.0 |
|
ky_lncc |
real |
1.0 |
|
kz_lncc |
real |
1.0 |
|
ldustdrift |
logical |
.false. |
|
lupw_lncc |
logical |
.false. |
|
radius_lncc |
real |
0.0 |
|
widthlncc |
real |
0.5 |
|
widthlncc1 |
real |
1.0 |
|
widthlncc2 |
real |
1.5 |
Module pscalar_nolog.f90
The following variables are part of the pscalar_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplcc |
real |
0.1 |
|
amplcc2 |
real |
0.0 |
|
ampllncc |
real |
||
ampllncc2 |
real |
||
cc_const |
real |
1.0 |
|
cc_left |
real |
1. |
|
cc_min |
real |
0.0 |
|
cc_right |
real |
0. |
|
epsilon_cc |
real |
0.0 |
|
epsilon_lncc |
real |
||
hoverr |
real |
0.05 |
|
initcc |
character (len=labellen) |
‘nothing’ |
|
initcc2 |
character (len=labellen) |
‘zero’ |
|
initlncc |
character (len=labellen) |
||
initlncc2 |
character (len=labellen) |
||
kx_cc |
real |
1.0 |
|
kx_lncc |
real |
||
kxx_cc |
real |
0.0 |
|
ky_cc |
real |
1.0 |
|
ky_lncc |
real |
||
kyy_cc |
real |
0.0 |
|
kz_cc |
real |
1.0 |
|
kz_lncc |
real |
||
kzz_cc |
real |
0.0 |
|
ll_sh |
integer |
-1 |
|
mm_sh |
integer |
-1 |
|
n_xprof |
integer |
0 |
|
powerlr |
real |
3.0 |
|
radius_cc |
real |
0.0 |
|
radius_lncc |
real |
||
widthcc |
real |
0.5 |
|
widthlncc |
real |
||
xjump_mid |
real |
0. |
|
yjump_mid |
real |
0. |
|
zjump_mid |
real |
0. |
|
zoverh |
real |
1.0 |
Module radiation_ray.f90
The following variables are part of the radiation_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl_bump |
real |
0.0 |
|
amplkapparho |
real |
1.0 |
|
amplSrad |
real |
1.0 |
|
angle_weight |
character (len=labellen) |
‘corrected’ |
|
bc_rad |
character (len=2*bclen+1), dimension(3) |
(/’0:0’,’0:0’,’S:0’/) |
|
cool_wid |
real |
||
expo2_rho_opa |
real |
0.0 |
|
expo2_temp_opa |
real |
0.0 |
|
expo_rho_opa |
real |
0.0 |
|
expo_temp_opa |
real |
0.0 |
|
expo_temp_opa_buff |
real |
0.0 |
|
Frad_boundary_ref |
real |
0.0 |
|
kappa20_cst |
real, dimension (mnu) |
0.0 |
|
kappa_ceiling |
real |
||
kappa_cst |
real, dimension (mnu) |
1.0 |
|
kappa_Kconst |
real |
1.0 |
|
kapparho_const |
real |
1.0 |
|
kapparho_cst |
real |
1.0 |
|
kapparho_floor |
real |
0.0 |
|
knee_temp_opa |
real |
0.0 |
|
lcheck_tau_division |
logical |
.false. |
|
lcommunicate |
logical |
.true. |
|
lcutoff_opticallythin |
logical |
.false. |
|
lcutoff_zconst |
logical |
.false. |
|
ldoppler_rad |
logical |
.false. |
|
ldoppler_rad_includeQ |
logical |
.false. |
|
ldoppler_rad_includeQ2fact |
logical |
.true. |
|
ldoppler_rad_includeQder |
logical |
.false. |
|
ldoppler_rad_includeQfact |
logical |
.true. |
|
lfix_radweight_1d |
logical |
.true. |
|
lintrinsic |
logical |
.true. |
|
lrad_cool_diffus |
logical |
.false. |
|
lrad_debug |
logical |
.false. |
|
lrad_pres_diffus |
logical |
.false. |
|
lradflux |
logical |
.false. |
|
lradpress |
logical |
.false. |
|
lread_source_function |
logical |
.false. |
|
lrevision |
logical |
.true. |
|
lsingle_ray |
logical |
.false. |
|
nIsurf |
integer |
1 |
|
nnu |
integer |
1 |
|
opacity_type |
character (len=labellen) |
‘Hminus’ |
|
rad2max |
integer |
1 |
|
radius_kapparho |
real |
1.0 |
|
radius_Srad |
real |
1.0 |
|
radx |
integer |
0 |
|
rady |
integer |
0 |
|
radz |
integer |
1 |
|
ref_rho_opa |
real |
1.0 |
|
ref_temp_opa |
real |
1.0 |
|
scalefactor_kappa |
real, dimension (mnu) |
1.0 |
|
scalefactor_Srad |
real, dimension (mnu) |
1.0 |
|
sigma_bump |
real |
1.0 |
|
single_ray |
integer, dimension (3) |
0 |
|
source_function_type |
character (len=labellen) |
‘LTE’ |
|
Srad_const |
real |
1.0 |
|
tau_bot |
real |
0.0 |
|
tau_top |
real |
0.0 |
|
TT_bot |
real |
0.0 |
|
TT_bump |
real |
0.0 |
|
TT_top |
real |
0.0 |
|
width_temp_opa |
real |
1.0 |
|
z_cutoff |
real |
Module selfgravity.f90
The following variables are part of the selfgrav_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
gravitational_const |
real, target |
0.0 |
|
kappa |
real |
0.0 |
|
lBryan_etal14 |
logical |
.false. |
PAR_DOC: Bryan_etal14 convention, where velocity is not comoving. |
lselfgravity_dust |
logical |
.false. |
|
lselfgravity_gas |
logical |
.true. |
|
lselfgravity_neutrals |
logical |
.false. |
|
luse_G_Newton |
logical |
.false. |
PAR_DOC: Use physical Newton constant (in the correct units) |
rhs_poisson_const |
real, target |
1.0 |
|
tstart_selfgrav |
real, target |
0.0 |
Module selfgravity_logspirals.f90
The following variables are part of the selfgrav_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
gravitational_const |
real, target |
0.0 |
|
kappa |
real |
0.0 |
|
lselfgravity_dust |
logical |
.false. |
|
lselfgravity_gas |
logical |
.true. |
|
lselfgravity_neutrals |
logical |
.false. |
|
rhs_poisson_const |
real, target |
1.0 |
|
tstart_selfgrav |
real, target |
0.0 |
Module shear.f90
The following variables are part of the shear_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
deltay |
(not found) |
||
lmagnetic_stretching |
logical |
.true. |
|
lposdef |
logical, dimension(mcom) |
.false. |
|
lposdef_advection |
logical |
.false. |
|
lrandomx0 |
logical |
.false. |
|
lshearadvection_as_shift |
logical, target |
.false. |
|
ltvd_advection |
logical |
.false. |
|
norder_poly |
integer |
3 |
|
Omega |
(not found) |
||
qshear |
(not found) |
||
qshear0 |
real |
0.0 |
|
shear_method |
character(len=7) |
‘fft’ |
|
sini |
real |
0.0 |
|
Sshear |
(not found) |
||
Sshear1 |
real |
0.0 |
|
u0_advec |
real, dimension(3) |
0.0 |
|
x0_shear |
real |
0.0 |
Module signal_handling.f90
The following variables are part of the signal_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
sigval |
integer, dimension(2) |
-1 |
2 is the max number of signal to catch |
Module solid_cells.f90
The following variables are part of the solid_cells_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl_noise |
real |
0. |
|
close_interpolation_method |
integer |
1 |
|
cylinder_radius |
real, dimension(max_items) |
0. |
|
cylinder_temp |
real, dimension(max_items) |
703.0 |
|
cylinder_xpos |
real, dimension(max_items) |
0. |
|
cylinder_ypos |
real, dimension(max_items) |
0. |
|
cylinder_zpos |
real, dimension(max_items) |
0. |
|
flow_dir_set |
real |
0. |
|
ineargridshift |
real |
1 |
|
init_uu |
real |
0. |
|
initsolid_cells |
character(len=labellen), dimension(ninit) |
‘nothing’ |
|
interpolation_method |
character(len=labellen) |
‘staircase’ |
|
lclose_interpolation |
logical |
.false. |
|
lclose_linear |
logical |
.false. |
|
lclose_quad_rad_inter |
logical |
.true. |
|
limit_close_linear |
real |
0.5 |
|
lnointerception |
logical |
.false. |
|
lset_flow_dir |
logical |
.false. |
|
ncylinders |
integer |
0 |
|
nforcepoints |
integer |
200 |
|
nspheres |
integer |
0 |
|
object_skin |
real |
0. |
|
skin_depth |
real |
0. |
|
sphere_radius |
real, dimension(max_items) |
0. |
|
sphere_temp |
real, dimension(max_items) |
703.0 |
|
sphere_xpos |
real, dimension(max_items) |
0. |
|
sphere_ypos |
real, dimension(max_items) |
0. |
|
sphere_zpos |
real, dimension(max_items) |
0. |
Module solid_cells_ogrid.f90
The following variables are part of the solid_cells_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
af |
real, intent(in) |
||
ampl_noise |
(not found) |
||
BDRY5 |
(not found) |
||
coeff_grid_o |
(not found) |
||
cylinder_radius |
(not found) |
||
cylinder_temp |
(not found) |
||
cylinder_xpos |
(not found) |
||
cylinder_ypos |
(not found) |
||
cylinder_zpos |
(not found) |
||
filter_frequency |
(not found) |
||
flow_dir_set |
(not found) |
||
grid_func_ogrid |
(not found) |
||
init_rho_cyl |
(not found) |
||
init_uu |
(not found) |
||
initsolid_cells |
(not found) |
||
interp_shift |
(not found) |
||
interpol_filter |
(not found) |
||
interpol_order_poly |
(not found) |
||
interpolation_method |
(not found) |
||
kinetics_heter |
(not found) |
||
lcheck_init_interpolation |
(not found) |
||
lcheck_interpolation |
(not found) |
||
ldist_CO |
(not found) |
||
ldist_CO2 |
(not found) |
||
lexpl_rho |
(not found) |
||
lfilter_rhoonly |
(not found) |
||
lfilter_solution |
(not found) |
||
lfilter_TT |
(not found) |
||
llin_BC |
(not found) |
||
lnonegative_Yk |
(not found) |
||
lock_dt |
(not found) |
||
lparticle_uradonly |
(not found) |
||
lreac_heter |
(not found) |
||
lrk_tvd |
(not found) |
||
lset_flow_dir |
(not found) |
||
lshift_origin_lower_ogrid |
(not found) |
||
lshift_origin_ogrid |
(not found) |
||
lsinus_spec_distr |
(not found) |
||
lspecial_rad_int |
(not found) |
||
lspecial_rad_int_mom |
(not found) |
||
ltanh_rate |
(not found) |
||
ncylinders |
(not found) |
||
particle_interpolate |
(not found) |
||
r_int_inner_vid |
(not found) |
||
r_ogrid |
(not found) |
||
reduce_timestep |
(not found) |
||
SBP |
(not found) |
||
SBP_optimized |
(not found) |
||
SBP_reduced_to2 |
(not found) |
||
scale_gas |
(not found) |
||
scale_oxy |
(not found) |
||
skin_depth_solid |
(not found) |
||
solid_reactions_intro_time |
(not found) |
||
tanh_a1 |
(not found) |
||
tanh_a2 |
(not found) |
||
Tgrad_stretch |
(not found) |
||
toler |
(not found) |
||
TT_square_fit |
(not found) |
||
xyz_star_ogrid |
(not found) |
Module streamlines.f90
The following variables are part of the streamlines_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
h_max |
real, public |
0.4 |
|
h_min |
real, public |
1e-4 |
|
int_q |
character (len=labellen), public |
‘’ |
|
l_max |
real, public |
10. |
|
tol |
real, public |
1e-4 |
|
trace_field |
character (len=labellen), public |
‘’ |
|
trace_sub |
integer, public |
1 |
Module temperature_idealgas.f90
The following variables are part of the entropy_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl_lnTT |
real, dimension (ninit) |
0.0 |
|
ampl_TT |
real, dimension (ninit) |
0.0 |
|
center1_x |
real |
0.0 |
|
center1_y |
real |
0.0 |
|
center1_z |
real |
0.0 |
|
coef_lnTT |
complex |
0. |
|
Fbot |
real |
||
hcond0 |
real |
||
hole_slope |
real |
0.0 |
|
hole_width |
real |
0.0 |
|
initlnTT |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
Kmax |
real |
0.0 |
|
Kmin |
real |
0.0 |
|
kx_lnTT |
real |
1. |
|
ky_lnTT |
real |
1. |
|
kz_lnTT |
real |
1. |
|
linitial_log |
logical |
.false. |
|
lnTT_const |
real |
0.0 |
|
ltemperature_nolog |
(not found) |
||
luminosity |
real |
0.0 |
|
mpoly0 |
real, target |
1.5 |
|
mpoly1 |
real, target |
1.5 |
|
mpoly2 |
real, target |
1.5 |
|
r_bcz |
real |
0.0 |
|
radius_lnTT |
real |
0.1 |
|
Tbump |
real |
0.0 |
|
temp_zaver_range |
real, dimension(2) |
||
TT_const |
real |
1.0 |
|
wheat |
real |
0.1 |
|
widthlnTT |
real |
2* |
Module temperature_ionization.f90
The following variables are part of the entropy_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl_lnTT |
real |
0. |
|
amplTT1 |
real |
0. |
|
amplTT2 |
real |
0. |
|
delta_TT |
real |
0. |
|
initlnTT |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
kx_lnTT |
real |
1.0 |
|
ky_lnTT |
real |
1.0 |
|
kz_lnTT |
real |
1.0 |
|
lnTT_const |
real |
0.0 |
|
lnTT_left |
real |
1.0 |
|
lnTT_right |
real |
1.0 |
|
ltemperature_nolog |
(not found) |
||
radius_lnTT |
real |
0.1 |
|
TT_const |
real |
1.0 |
|
widthlnTT |
real |
2* |
|
widthTT |
real |
0. |
|
xjump_mid |
real |
0. |
|
yjump_mid |
real |
0. |
|
zjump_mid |
real |
0. |
Module testfield_axisym.f90
The following variables are part of the testfield_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplaatest |
real, dimension (ninit) |
0. |
|
B_ext |
real, dimension(3) |
(/0.,0.,0./) |
|
initaatest |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
kx_aatest |
real, dimension (ninit) |
1. |
|
ky_aatest |
real, dimension (ninit) |
1. |
|
kz_aatest |
real, dimension (ninit) |
1. |
|
ljxb_as_aux |
logical |
.false. |
|
luxb_as_aux |
logical |
.false. |
|
phasex_aatest |
real, dimension (ninit) |
0. |
|
phasez_aatest |
real, dimension (ninit) |
0. |
|
zextent |
logical |
.true. |
Module testfield_axisym2.f90
The following variables are part of the testfield_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplaatest |
real, dimension (ninit) |
0. |
|
B_ext |
real, dimension(3) |
(/0.,0.,0./) |
|
initaatest |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
kx_aatest |
real, dimension (ninit) |
1. |
|
ky_aatest |
real, dimension (ninit) |
1. |
|
kz_aatest |
real, dimension (ninit) |
1. |
|
ljxb_as_aux |
logical |
.false. |
|
luxb_as_aux |
logical |
.false. |
|
phasex_aatest |
real, dimension (ninit) |
0. |
|
phasez_aatest |
real, dimension (ninit) |
0. |
|
zextent |
logical |
.true. |
Module testfield_meri.f90
The following variables are part of the testfield_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplaatest |
real, dimension (ninit) |
0. |
|
B_ext |
real, dimension(3) |
(/0.,0.,0./) |
|
initaatest |
character (len=labellen), dimension(ninit) |
‘zero’ |
|
ljxb_as_aux |
logical |
.false. |
|
luxb_as_aux |
logical |
.false. |
Module testflow_z.f90
The following variables are part of the testflow_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
inituutest |
character (len=labellen), dimension(ninit*njtestflow) |
‘nothing’ |
|
zextent |
logical |
.true. |
Module thermal_energy.f90
The following variables are part of the entropy_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
eth_const |
real |
1.0 |
|
eth_left |
real |
||
eth_right |
real |
||
initeth |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
widtheth |
real |
||
xjump_mid |
real |
0. |
|
yjump_mid |
real |
0. |
|
zjump_mid |
real |
0. |
Module experimental/anelastic.f90
The following variables are part of the density_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampllnrho |
real, dimension (ninit) |
0.0 |
|
amplrho |
real, dimension (ninit) |
0.0 |
|
b_ell |
(not found) |
||
beta_glnrho_global |
real, dimension(3) |
0.0 |
|
co1_ss |
real |
0. |
|
co2_ss |
real |
0. |
|
coeflnrho |
complex |
0. |
|
cs2bot |
(not found) |
||
cs2top |
(not found) |
||
density_floor |
real |
-1.0 |
|
eps_planet |
real |
0.5 |
|
hh0 |
real |
0.0 |
|
hoverr |
real |
0.05 |
|
idiff |
character (len=labellen), dimension(ndiff_max) |
‘’ |
|
initlnrho |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
kx_lnrho |
real, dimension (ninit) |
1.0 |
|
kxx_lnrho |
real, dimension (ninit) |
0.0 |
|
ky_lnrho |
real, dimension (ninit) |
1.0 |
|
kyy_lnrho |
real, dimension (ninit) |
0.0 |
|
kz_lnrho |
real, dimension (ninit) |
1.0 |
|
kzz_lnrho |
real, dimension (ninit) |
0.0 |
|
lanti_shockdiffusion |
logical |
.false. |
|
lcontinuity_gas |
logical |
.true. |
|
ldensity_nolog |
(not found) |
||
ldiffusion_nolog |
logical |
.false. |
|
lexponential_smooth |
logical |
.false. |
|
lnrho_const |
real |
0.0 |
|
lnrho_z_shift |
real |
0.0 |
|
lrho_as_aux |
logical |
.false. |
|
lshare_plaw |
logical |
.false. |
|
mpoly |
real, target |
||
phase_lnrho |
real, dimension (ninit) |
0.0 |
|
plaw |
real, target |
0.0 |
|
powerlr |
real |
3.0 |
|
q_ell |
real |
5.0 |
|
radial_percent_smooth |
real |
10. |
|
radius_lnrho |
real, dimension (ninit) |
0.5 |
|
rbound |
(not found) |
||
rho_const |
real |
1.0 |
|
rho_left |
real, dimension (ninit) |
1.0 |
|
rho_right |
real, dimension (ninit) |
1.0 |
|
rshift |
real |
0.0 |
|
Sigma1 |
real |
150. |
|
strati_type |
character (len=labellen) |
‘lnrho_ss’ |
|
wdamp |
real |
0. |
|
widthlnrho |
real, dimension (ninit) |
0.1 |
|
xblob |
real |
0. |
|
yblob |
real |
0. |
|
zblob |
real |
0. |
|
zoverh |
real |
1.5 |
Module experimental/barneshut.f90
The following variables are part of the poisson_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
lmakecartoon |
logical |
.false. |
print some map data to stdout for tree illustration purposes |
lnorepeatsumming |
logical |
.true. |
(very) slow to start, quick to run |
lprecalcdists |
logical |
.false. |
Pre-calculate point-region distances. |
lreadoctree |
logical |
.false. |
|
lshowtime |
logical |
.false. |
Print BH integration at each time step for |
lsquareregions |
logical |
.false. |
.true. = make regions as square-shaped as |
ltreestatus |
logical |
.false. |
|
lwriteoctree |
logical |
.false. |
|
octree_maxdist |
real |
1e308 |
|
octree_smoothdist |
real |
0.15 |
|
octree_theta |
real |
0.5 |
Module experimental/cosmicray_current.f90
The following variables are part of the cosmicrayflux_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplfcr |
real |
0. |
|
cs2cr |
real |
1. |
|
fcr_const |
real |
0. |
|
gamma_cr |
real |
1. |
|
initfcr |
character (len=labellen) |
‘zero’ |
|
kx_fcr |
real |
1. |
|
ky_fcr |
real |
1. |
|
kz_fcr |
real |
1. |
|
omegahat |
real |
0. |
Module experimental/cosmicray_density.f90
The following variables are part of the cosmicray_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplecr |
real |
.1 |
|
amplecr2 |
real |
0. |
|
ecr_const |
real |
0. |
|
epsilon_ecr |
real |
0. |
|
gammacr |
real |
4./3. |
|
initecr |
character (len=labellen) |
‘zero’ |
|
initecr2 |
character (len=labellen) |
‘zero’ |
|
kx_ecr |
real |
1. |
|
ky_ecr |
real |
1. |
|
kz_ecr |
real |
1. |
|
lnegl |
logical |
.false. |
|
lvariable_tensor_diff |
logical |
.false. |
|
radius_ecr |
real |
1. |
|
widthecr |
real |
.5 |
|
x_pos_cr |
real |
.0 |
|
x_pos_cr2 |
real |
.0 |
|
y_pos_cr |
real |
.0 |
|
y_pos_cr2 |
real |
.0 |
|
z_pos_cr |
real |
.0 |
|
z_pos_cr2 |
real |
.0 |
Module experimental/entropy_anelastic.f90
The following variables are part of the entropy_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl_ss |
real |
0. |
|
ampl_TT |
real |
0. |
|
beta_glnrho_global |
real, dimension(3) |
0. |
|
center1_x |
real |
0. |
|
center1_y |
real |
0. |
|
center1_z |
real |
0. |
|
center2_x |
real |
0. |
|
center2_y |
real |
0. |
|
center2_z |
real |
0. |
|
chi_t |
real |
0. |
|
cool_fac |
real |
1. |
|
cs0hs |
real |
0.0 |
|
cs2cool |
real, target |
||
epsilon_ss |
real |
0. |
|
grads0 |
(not found) |
||
H0hs |
real |
0.0 |
|
hcond0 |
real, target |
||
initss |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
khor_ss |
real |
1. |
|
kx_ss |
real |
1. |
|
ky_ss |
real |
1. |
|
kz_ss |
real |
1. |
|
ladvection_entropy |
logical |
.true. |
|
lhcond_global |
logical |
.false. |
|
luminosity |
real |
0. |
|
lviscosity_heat |
logical |
.true. |
|
mixinglength_flux |
real |
0. |
|
mpoly0 |
real, target |
1.5 |
|
mpoly1 |
real, target |
1.5 |
|
mpoly2 |
real, target |
1.5 |
|
pertss |
character (len=labellen) |
‘zero’ |
|
pp_const |
real |
0. |
|
r_bcz |
real |
0. |
|
radius_ss |
real |
0.1 |
|
rho0hs |
real |
0.0 |
|
ss_const |
real |
0. |
|
ss_left |
real |
1. |
|
ss_right |
real |
1. |
|
T0 |
real |
1. |
|
tau_cool |
real |
0.0 |
|
thermal_background |
real |
0. |
|
thermal_peak |
real |
0. |
|
thermal_scaling |
real |
1. |
|
TTref_cool |
real |
0.0 |
|
wheat |
real |
0.1 |
|
widthss |
real |
2* |
Module experimental/eos_idealgas_vapor.f90
The following variables are part of the eos_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
cpdry |
real |
||
cs0 |
real |
1.0 |
|
error_cp |
real |
1.0e-6 |
|
gamma |
real |
5.0/3.0 |
|
mudry |
real |
1.0 |
|
muvap |
real |
1.0 |
|
rho0 |
real |
1.0 |
Module experimental/gravity_r_radpressure.f90
The following variables are part of the grav_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
dustbeta |
real, dimension(ndustspec) |
0.0 |
|
g0 |
real |
0. |
|
g01 |
real, dimension(ninit) |
0. |
|
g1 |
real |
0. |
|
gravz |
real |
0. |
|
gravz_profile |
character (len=labellen) |
‘zero’ |
|
ionbeta |
real |
0.0 |
Poynting-Robertson beta for ions experiencing rad pressure |
ipotential |
character (len=labellen), dimension(ninit) |
‘zero’ |
|
lgravity_gas |
logical |
.true. |
|
lgravity_neutrals |
logical |
.true. |
|
lindirect_terms |
logical |
.false. |
|
lnumerical_equilibrium |
logical |
.false. |
|
lramp_mass |
logical |
.false. |
|
n_pot |
real |
10 |
exponent for smoothed potential |
n_pot1 |
real |
10 |
exponent for smoothed potential |
nu_epicycle |
real |
1.0 |
|
qgshear |
real |
1.5 |
(global) shear parameter |
r0_pot |
real |
0. |
peak radius for smoothed potential |
r1_pot1 |
real |
0. |
peak radius for smoothed potential |
rp1_pot |
real |
0. |
|
rpot |
real, dimension(ninit) |
0. |
|
t_ramp_mass |
real |
Module experimental/hydro_ffreeMHDrel.f90
The following variables are part of the hydro_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampluu |
real |
0. |
|
initpower |
real |
1. |
|
inituu |
character (len=labellen) |
‘zero’ |
|
kx_uu |
real |
1. |
|
ky_uu |
real |
1. |
|
kz_uu |
real |
1. |
|
Omega |
(not found) |
||
urand |
real |
0. |
|
uu_left |
real |
0. |
|
uu_lower |
real |
1. |
|
uu_right |
real |
0. |
|
uu_upper |
real |
1. |
|
uy_left |
real |
0. |
|
uy_right |
real |
0. |
|
widthuu |
real |
.1 |
Module experimental/magnetic_ffreeMHDrel.f90
The following variables are part of the magnetic_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
A0 |
real, dimension(3) |
(/0.,0.,1./) |
|
amplaa |
real |
0. |
|
amplaa2 |
real |
0. |
|
axisr1 |
real, dimension(3) |
(/0,0,1/) |
|
axisr2 |
real, dimension(3) |
(/1,0,0/) |
|
B_ext |
real, dimension(3) |
(/0.,0.,0./) |
|
by_left |
real |
0. |
|
by_right |
real |
0. |
|
dispr1 |
real, dimension(3) |
(/0.,0.5,0./) |
|
dispr2 |
real, dimension(3) |
(/0.,-0.5,0./) |
|
epsilonaa |
real |
1e-2 |
|
eta |
real |
0. |
|
fring1 |
real |
0. |
|
fring2 |
real |
0. |
|
initaa |
character (len=labellen) |
‘zero’ |
|
initaa2 |
character (len=labellen) |
‘zero’ |
|
Iring1 |
real |
0. |
|
Iring2 |
real |
0. |
|
k_aa |
real, dimension(3) |
(/0.,0.,0./) |
|
kx_aa2 |
real |
||
ky_aa2 |
real |
||
kz_aa2 |
real |
||
lpress_equil |
logical |
.false. |
|
radius |
real |
.1 |
|
Rring1 |
real |
1. |
|
Rring2 |
real |
1. |
|
widthaa |
real |
.5 |
|
wr1 |
real |
0.3 |
|
wr2 |
real |
0.3 |
|
z0aa |
real |
0. |
Module experimental/magnetic_shearboxJ.f90
The following variables are part of the magnetic_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amp_relprof |
real |
1.0 |
|
ampl_ax |
real, dimension (ninit) |
0.0 |
|
ampl_ay |
real, dimension (ninit) |
0.0 |
|
ampl_az |
real, dimension (ninit) |
0.0 |
|
ampl_B0 |
real |
0.0 |
|
amplaa |
real, dimension (ninit) |
0.0 |
|
amplaaB |
real, dimension (ninit) |
0.0 |
|
amplaaJ |
real, dimension (ninit) |
0.0 |
|
B0_ext |
real, dimension(3) |
0.0 |
|
B_ext |
real, dimension(3) |
0.0 |
|
boxchargedensity |
(not found) |
||
boxcurrentux |
(not found) |
||
boxomega |
(not found) |
||
boxshear |
(not found) |
||
by_left |
real |
0.0 |
|
by_right |
real |
0.0 |
|
bz_left |
real |
0.0 |
|
bz_right |
real |
0.0 |
|
center1_x |
real |
0.0 |
|
center1_y |
real |
0.0 |
|
center1_z |
real |
0.0 |
|
coefaa |
complex, dimension(3) |
(/0.0,0.0,0.0/) |
|
coefbb |
complex, dimension(3) |
(/0.0,0.0,0.0/) |
|
cutoff_aa |
real |
0.0 |
|
damp |
real |
0. |
|
dipole_moment |
real |
0.0 |
|
epsilonaa |
real |
0.01 |
|
eta_jump |
real |
0.0 |
|
etaB |
real |
0. |
|
fluxtube_border_width |
real |
||
inclaa |
real |
0.0 |
|
initaa |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
initpower2_aa |
real |
-11./3. |
|
initpower_aa |
real |
0.0 |
|
J_ext |
real, dimension(3) |
(/0.0,0.0,0.0/) |
|
k_relprof |
real |
1.0 |
|
kgaussian_aa |
real |
0. |
|
kpeak_aa |
real |
10. |
|
kx_aa |
real, dimension (ninit) |
1.0 |
|
kx_ax |
real, dimension (ninit) |
0.0 |
|
kx_ay |
real, dimension (ninit) |
0.0 |
|
kx_az |
real, dimension (ninit) |
0.0 |
|
ky_aa |
real, dimension (ninit) |
1.0 |
|
ky_ax |
real, dimension (ninit) |
0.0 |
|
ky_ay |
real, dimension (ninit) |
0.0 |
|
ky_az |
real, dimension (ninit) |
0.0 |
|
kz_aa |
real, dimension (ninit) |
1.0 |
|
kz_ax |
real, dimension (ninit) |
0.0 |
|
kz_ay |
real, dimension (ninit) |
0.0 |
|
kz_az |
real, dimension (ninit) |
0.0 |
|
lB_ext_in_comaux |
logical |
.true. |
|
lB_ext_pot |
logical |
.false. |
|
lbb_as_aux |
logical |
.false. |
|
lbb_as_comaux |
logical |
.false. |
|
lbbt_as_aux |
logical |
.false. |
|
lbext_curvilinear |
logical |
.true. |
|
lbx_ext_global |
logical |
.false. |
|
lby_ext_global |
logical |
.false. |
|
lbz_ext_global |
logical |
.false. |
|
lcheck_positive_va2 |
logical |
.false. |
|
lEE_as_aux |
logical |
.false. |
|
lforce_free_test |
logical |
.false. |
|
ljj_as_aux |
logical |
.false. |
|
ljjt_as_aux |
logical |
.false. |
|
ljxb_as_aux |
logical |
.false. |
|
lneutralion_heat |
logical |
.true. |
|
lno_second_ampl_aa |
logical |
.true. |
|
lohmic_heat |
logical |
.true. |
|
lpress_equil |
logical |
.false. |
|
lpress_equil_alt |
logical |
.false. |
|
lpress_equil_via_ss |
logical |
.false. |
|
lshearboxcurrent |
logical |
!!AJWR |
|
lskip_projection_aa |
logical |
.false. |
|
lua_as_aux |
logical |
.false. |
|
magnetic_xaver_range |
real, dimension(2) |
||
magnetic_zaver_range |
real, dimension(2) |
||
mix_factor |
real |
0. |
|
mu_ext_pot |
real |
-0.5 |
|
mu_r |
real |
-0.5 |
(still needed for backwards compatibility) |
N_modes_aa |
integer |
1 |
|
ncutoff_aa |
real |
1. |
|
non_ffree_factor |
real |
1. |
|
phase_ax |
real, dimension (ninit) |
0.0 |
|
phase_ay |
real, dimension (ninit) |
0.0 |
|
phase_az |
real, dimension (ninit) |
0.0 |
|
phasex_aa |
real, dimension (ninit) |
0.0 |
|
phasey_aa |
real, dimension (ninit) |
0.0 |
|
phasez_aa |
real, dimension (ninit) |
0.0 |
|
radius |
real |
0.1 |
|
radRFP |
real |
1. |
|
relhel_aa |
real |
1. |
|
RFPrad |
real, dimension (ninit) |
1.0 |
|
RFPradB |
real |
1. |
|
RFPradJ |
real |
1. |
|
rnoise_ext |
real |
||
rnoise_int |
real |
||
t0_bext |
real |
0.0 |
|
t_bext |
real |
0.0 |
|
tau_relprof |
real |
0.0 |
|
th_spot |
real |
PI/4 |
|
two_step_factor |
real |
1. |
|
va2max_jxb |
real |
0.0 |
|
va2power_jxb |
integer |
5 |
|
widthaa |
real |
0.5 |
|
x0aa |
real |
0.0 |
|
z0aa |
real |
0.0 |
|
znoise_ext |
real |
||
znoise_int |
real |
Module experimental/neutralvelocity_matchiontemp.f90
The following variables are part of the neutralvelocity_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl_unx |
real |
0.0 |
|
ampl_uny |
real |
0.0 |
|
ampl_unz |
real |
0.0 |
|
ampluun |
real, dimension (ninit) |
0.0 |
|
colldrag |
real |
0 |
|
csn0 |
real |
0. |
|
inituun |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
kx_uun |
real |
1. |
|
ky_uun |
real |
1. |
|
kz_uun |
real |
1. |
|
ladvection_velocity |
logical |
.true. |
|
lcentrifugal_force |
logical |
.false. |
|
lcoriolis_force |
logical |
.true. |
|
Omega |
(not found) |
||
rnoise_ext |
real |
||
rnoise_int |
real |
||
uun_const |
real, dimension(3) |
(/0.,0.,0./) |
Module experimental/particles_dust_ajwr.f90
The following variables are part of the particles_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
a_ellipsoid |
real |
0.0 |
|
amplvvp |
real |
0.0 |
|
amplxxp |
real |
0.0 |
|
b_ellipsoid |
real |
0.0 |
|
bcpx |
(not found) |
||
bcpy |
(not found) |
||
bcpz |
(not found) |
||
beta_dPdr_dust |
real |
0.0 |
|
brownian_T0 |
real |
0.0 |
|
c_ellipsoid |
real |
0.0 |
|
coeff |
complex, dimension (7) |
(0.0,0.0) |
|
coeff_restitution |
real |
0.5 |
|
cond_ratio |
real |
0.0 |
|
delta_vp0 |
real |
1.0 |
|
Deltauy_gas_friction |
real |
0.0 |
|
dustdensity_powerlaw |
(not found) |
||
eps1 |
real |
0.5 |
|
eps_dtog |
(not found) |
||
epsp_friction_increase |
real |
100.0 |
|
frac_init_particles |
real |
1.0 |
|
gab_width |
(not found) |
||
gravr |
real |
1.0 |
|
gravr_profile |
character (len=labellen) |
‘’ |
|
gravsmooth |
real |
0.0 |
|
gravx |
real |
0.0 |
|
gravx_profile |
character (len=labellen) |
‘’ |
|
gravz |
real |
0.0 |
|
gravz_profile |
character (len=labellen) |
‘’ |
|
initvvp |
character (len=labellen), dimension (ninit) |
‘nothing’ |
|
initxxp |
character (len=labellen), dimension (ninit) |
‘nothing’ |
|
interp_pol_gradTT |
character (len=labellen) |
‘ngp’ |
|
interp_pol_oo |
character (len=labellen) |
‘ngp’ |
|
interp_pol_pp |
character (len=labellen) |
‘ngp’ |
|
interp_pol_rho |
character (len=labellen) |
‘ngp’ |
|
interp_pol_species |
character (len=labellen) |
‘ngp’ |
|
interp_pol_TT |
character (len=labellen) |
‘ngp’ |
|
interp_pol_uu |
character (len=labellen) |
‘ngp’ |
|
kx_gg |
real |
1.0 |
|
kx_vpx |
real |
0.0 |
|
kx_vpy |
real |
0.0 |
|
kx_vpz |
real |
0.0 |
|
kx_vvp |
real |
0.0 |
|
kx_xxp |
real |
0.0 |
|
ky_vpx |
real |
0.0 |
|
ky_vpy |
real |
0.0 |
|
ky_vpz |
real |
0.0 |
|
ky_vvp |
real |
0.0 |
|
ky_xxp |
real |
0.0 |
|
kz_gg |
real |
1.0 |
|
kz_vpx |
real |
0.0 |
|
kz_vpy |
real |
0.0 |
|
kz_vpz |
real |
0.0 |
|
kz_vvp |
real |
0.0 |
|
kz_xxp |
real |
0.0 |
|
l_hole |
integer |
0 |
|
lbrownian_forces |
logical |
.false. |
|
lcalc_uup |
logical |
.false. |
|
lcentrifugal_force_par |
logical |
.false. |
|
lcheck_exact_frontier |
(not found) |
||
lcoldstart_amplitude_correction |
logical |
.false. |
|
lcollisional_cooling_rms |
logical |
.false. |
|
lcollisional_cooling_taucool |
logical |
.false. |
|
lcollisional_cooling_twobody |
logical |
.false. |
|
lcollisional_dragforce_cooling |
logical |
.false. |
|
lcollisional_heat |
logical |
.false. |
|
lcompensate_friction_increase |
logical |
.false. |
|
lcoriolis_force_par |
logical |
.true. |
|
ldragforce_dust_par |
logical |
.false. |
|
ldragforce_equi_global_eps |
logical |
.false. |
|
ldragforce_equi_noback |
logical |
.false. |
|
ldragforce_gas_par |
logical |
.false. |
|
ldragforce_heat |
logical |
.false. |
|
ldragforce_radialonly |
logical |
.false. |
|
ldragforce_stiff |
logical |
.false. |
|
ldraglaw_eps_stk_transonic |
logical |
.false. |
|
ldraglaw_epstein |
logical |
.true. |
|
ldraglaw_epstein_stokes_linear |
logical |
.false. |
|
ldraglaw_epstein_transonic |
logical |
.false. |
|
ldraglaw_purestokes |
logical |
.false. |
|
ldraglaw_simple |
logical |
.false. |
|
ldraglaw_steadystate |
logical |
.false. |
|
ldt_adv_par |
logical |
.true. |
|
ldt_grav_par |
logical |
.true. |
|
lenforce_policy |
logical |
.false. |
|
lglobalrandom |
logical |
.false. |
|
linsert_particles_continuously |
(not found) |
||
linterpolate_spline |
(not found) |
||
lmigration_real_check |
(not found) |
||
lmigration_redo |
(not found) |
||
lnocalc_np |
(not found) |
||
lnocalc_rhop |
(not found) |
||
lnostore_uu |
logical |
.true. |
|
lparticle_gravity |
logical |
.true. |
|
lparticlemesh_cic |
(not found) |
||
lparticlemesh_pqs_assignment |
(not found) |
||
lparticlemesh_tsc |
(not found) |
||
lrandom_particle_pencils |
(not found) |
||
lreassign_strat_rhom |
logical |
.true. |
|
lsinkparticle_1 |
(not found) |
||
lsinkpoint |
logical |
.false. |
|
ltau_coll_min_courant |
logical |
.true. |
|
lthermophoretic_forces |
logical |
.false. |
|
Lx0 |
real |
0.0 |
|
Ly0 |
real |
0.0 |
|
Lz0 |
real |
0.0 |
|
m_hole |
integer |
0 |
|
mean_free_path_gas |
real |
0.0 |
|
mp_swarm |
(not found) |
||
mpmat |
(not found) |
||
n_hole |
integer |
0 |
|
np_const |
(not found) |
||
np_swarm |
(not found) |
||
nu_epicycle |
real |
0.0 |
|
particle_mesh |
(not found) |
||
particle_radius |
(not found) |
||
phase_vpx |
real |
0.0 |
|
phase_vpy |
real |
0.0 |
|
phase_vpz |
real |
0.0 |
|
pos_ellipsoid |
real, dimension (3) |
(/0.0,0.0,0.0/) |
|
pos_sphere |
real, dimension (3) |
(/0.0,0.0,0.0/) |
|
rad_sphere |
real |
0.0 |
|
rhop_const |
(not found) |
||
rhop_swarm |
(not found) |
||
rhopmat |
(not found) |
||
Ri0 |
real |
0.25 |
|
rp_ext |
(not found) |
||
rp_int |
(not found) |
||
rpbeta |
real |
0.0 |
|
rpbeta_species |
real, target, dimension (npar_species) |
0.0 |
|
rsinkparticle_1 |
(not found) |
||
rsinkpoint |
real |
0.0 |
|
tau_coll_min |
real |
0.0 |
|
taucool |
real |
0.0 |
|
tausg_min |
real |
0.0 |
|
tausp |
real |
0.0 |
|
tausp_species |
real, target, dimension (npar_species) |
0.0 |
|
temp_grad0 |
real, dimension (3) |
(/0.0,0.0,0.0/) |
|
thermophoretic_eq |
character (len=labellen) |
‘nothing’ |
|
thermophoretic_T0 |
real |
0.0 |
|
tstart_brownian_par |
real |
0.0 |
|
tstart_collisional_cooling |
real |
0.0 |
|
tstart_dragforce_par |
real |
0.0 |
|
tstart_grav_par |
real |
0.0 |
|
tstart_grav_r_par |
real |
0.0 |
|
tstart_grav_x_par |
real |
0.0 |
|
tstart_grav_z_par |
real |
0.0 |
|
tstart_liftforce_par |
real |
0.0 |
|
tstart_sink_par |
real |
0.0 |
|
vpx0 |
real |
0.0 |
|
vpx1 |
real |
0.0 |
|
vpx2 |
real |
0.0 |
|
vpx3 |
real |
0.0 |
|
vpy0 |
real |
0.0 |
|
vpy1 |
real |
0.0 |
|
vpy2 |
real |
0.0 |
|
vpy3 |
real |
0.0 |
|
vpz0 |
real |
0.0 |
|
vpz1 |
real |
0.0 |
|
vpz2 |
real |
0.0 |
|
vpz3 |
real |
0.0 |
|
xp0 |
real |
0.0 |
|
xp1 |
real |
0.0 |
|
xp2 |
real |
0.0 |
|
xp3 |
real |
0.0 |
|
xsinkpoint |
real |
0.0 |
|
yp0 |
real |
0.0 |
|
yp1 |
real |
0.0 |
|
yp2 |
real |
0.0 |
|
yp3 |
real |
0.0 |
|
ysinkpoint |
real |
0.0 |
|
zp0 |
real |
0.0 |
|
zp1 |
real |
0.0 |
|
zp2 |
real |
0.0 |
|
zp3 |
real |
0.0 |
|
zsinkpoint |
real |
0.0 |
Module experimental/particles_dust_brdeplete.f90
The following variables are part of the particles_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
a_ellipsoid |
real |
0.0 |
|
amplvvp |
real |
0.0 |
|
amplxxp |
real |
0.0 |
|
b_ellipsoid |
real |
0.0 |
|
bcpx |
(not found) |
||
bcpy |
(not found) |
||
bcpz |
(not found) |
||
beta_dPdr_dust |
real |
0.0 |
|
birthring_r |
real |
1.0 |
|
birthring_width |
real |
0.1 |
|
brownian_T0 |
real |
0.0 |
|
c_ellipsoid |
real |
0.0 |
|
coeff |
complex, dimension (7) |
(0.0,0.0) |
|
coeff_restitution |
real |
0.5 |
|
cond_ratio |
real |
0.0 |
|
delta_vp0 |
real |
1.0 |
|
Deltauy_gas_friction |
real |
0.0 |
|
dustdensity_powerlaw |
(not found) |
||
eps1 |
real |
0.5 |
|
eps_dtog |
(not found) |
||
epsp_friction_increase |
real |
100.0 |
|
frac_init_particles |
real |
1.0 |
|
gab_width |
(not found) |
||
gravr |
real |
1.0 |
|
gravr_profile |
character (len=labellen) |
‘’ |
|
gravsmooth |
real |
0.0 |
|
gravx |
real |
0.0 |
|
gravx_profile |
character (len=labellen) |
‘’ |
|
gravz |
real |
0.0 |
|
gravz_profile |
character (len=labellen) |
‘’ |
|
initvvp |
character (len=labellen), dimension (ninit) |
‘nothing’ |
|
initxxp |
character (len=labellen), dimension (ninit) |
‘nothing’ |
|
interp_pol_gradTT |
character (len=labellen) |
‘ngp’ |
|
interp_pol_oo |
character (len=labellen) |
‘ngp’ |
|
interp_pol_pp |
character (len=labellen) |
‘ngp’ |
|
interp_pol_rho |
character (len=labellen) |
‘ngp’ |
|
interp_pol_species |
character (len=labellen) |
‘ngp’ |
|
interp_pol_TT |
character (len=labellen) |
‘ngp’ |
|
interp_pol_uu |
character (len=labellen) |
‘ngp’ |
|
kx_gg |
real |
1.0 |
|
kx_vpx |
real |
0.0 |
|
kx_vpy |
real |
0.0 |
|
kx_vpz |
real |
0.0 |
|
kx_vvp |
real |
0.0 |
|
kx_xxp |
real |
0.0 |
|
ky_vpx |
real |
0.0 |
|
ky_vpy |
real |
0.0 |
|
ky_vpz |
real |
0.0 |
|
ky_vvp |
real |
0.0 |
|
ky_xxp |
real |
0.0 |
|
kz_gg |
real |
1.0 |
|
kz_vpx |
real |
0.0 |
|
kz_vpy |
real |
0.0 |
|
kz_vpz |
real |
0.0 |
|
kz_vvp |
real |
0.0 |
|
kz_xxp |
real |
0.0 |
|
l_hole |
integer |
0 |
|
lbrownian_forces |
logical |
.false. |
|
lcalc_uup |
logical |
.false. |
|
lcentrifugal_force_par |
logical |
.false. |
|
lcheck_exact_frontier |
(not found) |
||
lcoldstart_amplitude_correction |
logical |
.false. |
|
lcollisional_cooling_rms |
logical |
.false. |
|
lcollisional_cooling_taucool |
logical |
.false. |
|
lcollisional_cooling_twobody |
logical |
.false. |
|
lcollisional_dragforce_cooling |
logical |
.false. |
|
lcollisional_heat |
logical |
.false. |
|
lcompensate_friction_increase |
logical |
.false. |
|
lcoriolis_force_par |
logical |
.true. |
|
ldragforce_dust_par |
logical |
.false. |
|
ldragforce_equi_global_eps |
logical |
.false. |
|
ldragforce_equi_noback |
logical |
.false. |
|
ldragforce_gas_par |
logical |
.false. |
|
ldragforce_heat |
logical |
.false. |
|
ldragforce_radialonly |
logical |
.false. |
|
ldragforce_stiff |
logical |
.false. |
|
ldraglaw_eps_stk_transonic |
logical |
.false. |
|
ldraglaw_epstein |
logical |
.true. |
|
ldraglaw_epstein_stokes_linear |
logical |
.false. |
|
ldraglaw_epstein_transonic |
logical |
.false. |
|
ldraglaw_purestokes |
logical |
.false. |
|
ldraglaw_simple |
logical |
.false. |
|
ldraglaw_steadystate |
logical |
.false. |
|
ldt_adv_par |
logical |
.true. |
|
ldt_grav_par |
logical |
.true. |
|
lenforce_policy |
logical |
.false. |
|
lgaussian_birthring |
logical |
.false. |
|
lglobalrandom |
logical |
.false. |
|
lignore_rhop_swarm |
(not found) |
||
linsert_particles_continuously |
(not found) |
||
linterpolate_spline |
(not found) |
||
lmigration_real_check |
(not found) |
||
lmigration_redo |
(not found) |
||
lnocalc_np |
(not found) |
||
lnocalc_rhop |
(not found) |
||
lnostore_uu |
logical |
.true. |
|
lparticle_gravity |
logical |
.true. |
|
lparticlemesh_cic |
(not found) |
||
lparticlemesh_pqs_assignment |
(not found) |
||
lparticlemesh_tsc |
(not found) |
||
lrandom_particle_pencils |
(not found) |
||
lreassign_strat_rhom |
logical |
.true. |
|
lsinkparticle_1 |
(not found) |
||
lsinkpoint |
logical |
.false. |
|
ltau_coll_min_courant |
logical |
.true. |
|
lthermophoretic_forces |
logical |
.false. |
|
lvector_gravity |
logical |
.false. |
|
lwithhold_init_particles |
logical |
.false. |
|
Lx0 |
real |
0.0 |
|
Ly0 |
real |
0.0 |
|
Lz0 |
real |
0.0 |
|
m_hole |
integer |
0 |
|
mean_free_path_gas |
real |
0.0 |
|
mp_swarm |
(not found) |
||
mpmat |
(not found) |
||
n_hole |
integer |
0 |
|
np_const |
(not found) |
||
np_swarm |
(not found) |
||
nu_epicycle |
real |
0.0 |
|
particle_mesh |
(not found) |
||
particle_radius |
(not found) |
||
phase_vpx |
real |
0.0 |
|
phase_vpy |
real |
0.0 |
|
phase_vpz |
real |
0.0 |
|
pos_ellipsoid |
real, dimension (3) |
(/0.0,0.0,0.0/) |
|
pos_sphere |
real, dimension (3) |
(/0.0,0.0,0.0/) |
|
rad_sphere |
real |
0.0 |
|
rhop_const |
(not found) |
||
rhop_swarm |
(not found) |
||
rhopmat |
(not found) |
||
Ri0 |
real |
0.25 |
|
rp_ext |
(not found) |
||
rp_int |
(not found) |
||
rpbeta |
real |
0.0 |
|
rpbeta_species |
real, target, dimension (npar_species) |
0.0 |
|
rsinkparticle_1 |
(not found) |
||
rsinkpoint |
real |
0.0 |
|
tau_coll_min |
real |
0.0 |
|
taucool |
real |
0.0 |
|
tausg_min |
real |
0.0 |
|
tausp |
real |
0.0 |
|
tausp_species |
real, target, dimension (npar_species) |
0.0 |
|
temp_grad0 |
real, dimension (3) |
(/0.0,0.0,0.0/) |
|
thermophoretic_eq |
character (len=labellen) |
‘nothing’ |
|
thermophoretic_T0 |
real |
0.0 |
|
tstart_brownian_par |
real |
0.0 |
|
tstart_collisional_cooling |
real |
0.0 |
|
tstart_dragforce_par |
real |
0.0 |
|
tstart_grav_par |
real |
0.0 |
|
tstart_grav_r_par |
real |
0.0 |
|
tstart_grav_x_par |
real |
0.0 |
|
tstart_grav_z_par |
real |
0.0 |
|
tstart_liftforce_par |
real |
0.0 |
|
tstart_sink_par |
real |
0.0 |
|
vpx0 |
real |
0.0 |
|
vpx1 |
real |
0.0 |
|
vpx2 |
real |
0.0 |
|
vpx3 |
real |
0.0 |
|
vpy0 |
real |
0.0 |
|
vpy1 |
real |
0.0 |
|
vpy2 |
real |
0.0 |
|
vpy3 |
real |
0.0 |
|
vpz0 |
real |
0.0 |
|
vpz1 |
real |
0.0 |
|
vpz2 |
real |
0.0 |
|
vpz3 |
real |
0.0 |
|
xp0 |
real |
0.0 |
|
xp1 |
real |
0.0 |
|
xp2 |
real |
0.0 |
|
xp3 |
real |
0.0 |
|
xsinkpoint |
real |
0.0 |
|
yp0 |
real |
0.0 |
|
yp1 |
real |
0.0 |
|
yp2 |
real |
0.0 |
|
yp3 |
real |
0.0 |
|
ysinkpoint |
real |
0.0 |
|
zp0 |
real |
0.0 |
|
zp1 |
real |
0.0 |
|
zp2 |
real |
0.0 |
|
zp3 |
real |
0.0 |
|
zsinkpoint |
real |
0.0 |
Module experimental/particles_nbody_ajwr.f90
The following variables are part of the particles_nbody_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
accrete_hills_frac |
real, dimension(nspar) |
0.2 |
|
bcspx |
(not found) |
||
bcspy |
(not found) |
||
bcspz |
(not found) |
||
cdtpnbody |
real |
0.1 |
|
delta_vsp0 |
real |
1.0 |
|
density_scale |
real |
0.001 |
|
eccentricity |
real |
0.0 |
|
final_ramped_mass |
real, dimension(nspar) |
0.0 |
|
GNewton |
real |
||
icreate |
integer |
100 |
|
initvvsp |
character (len=labellen) |
‘nothing’ |
|
initxxsp |
character (len=labellen) |
‘random’ |
|
istar |
integer |
1 |
|
laccrete_when_create |
logical |
.true. |
|
laccretion |
logical, dimension(nspar) |
.false. |
|
ladd_mass |
logical, dimension(nspar) |
.false. |
|
lcreate_dust |
logical |
.true. |
|
lcreate_gas |
logical |
.true. |
|
lcreate_sinks |
logical |
.false. |
|
lcylindrical_gravity_nbody |
logical, dimension(nspar) |
.false. |
|
ldt_nbody |
logical |
.true. |
|
lexclude_frozen |
logical |
.false. |
|
linertial_frame |
logical |
.true. |
|
linterpolate_gravity |
logical |
.false. |
|
linterpolate_quadratic_spline |
logical |
.false. |
|
lramp |
logical |
.false. |
|
lretrograde |
logical |
.false. |
|
lvectorgravity |
logical |
.false. |
|
maxsink |
integer |
10*nspar |
|
pmass |
real, dimension(nspar) |
0.0 |
|
r_smooth |
real, dimension(nspar) |
0.0 |
|
ramp_orbits |
integer |
5 |
|
semimajor_axis |
real |
1.0 |
|
vspx0 |
real, dimension(nspar) |
0.0 |
|
vspy0 |
real, dimension(nspar) |
0.0 |
|
vspz0 |
real, dimension(nspar) |
0.0 |
|
xsp0 |
real, dimension(nspar) |
0.0 |
|
ysp0 |
real, dimension(nspar) |
0.0 |
|
zsp0 |
real, dimension(nspar) |
0.0 |
Module experimental/particles_potential.f90
The following variables are part of the particles_potential_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
arb_factor |
integer |
10 |
|
cell_in_grid |
integer |
1 |
|
fampl |
real |
1. |
|
lpotential |
logical |
||
Nbin_in_Rcutoff |
integer |
100 |
|
ppotential |
character (len=labellen) |
‘nothing’ |
|
psigma_by_dx |
real |
0.1 |
|
Rcutoff_in_grid |
integer |
1 |
|
rescale_diameter |
real |
1. |
|
sigma_in_grid |
integer |
1 |
|
skin_factor |
real |
2. |
Module experimental/particles_radius_ajwr.f90
The following variables are part of the particles_radius_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
a0_initdist |
real |
5e-6 |
|
alpha_cond |
real |
1.0 |
|
ap0 |
real, dimension (ninit) |
0.0 |
|
ap1 |
real |
1.0 |
|
aphigh |
real |
2.0 |
|
aplow |
real |
1.0 |
|
apmin |
real |
0.0 |
|
cdtpc |
real |
0.2 |
|
cdtps |
real |
0.2 |
|
condensation_coefficient_type |
character (len=labellen) |
‘constant’ |
|
deltavp12_floor |
real |
0.0 |
|
diffusion_coefficient |
real |
1.0 |
|
eps_dtog |
(not found) |
||
initap |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
lborder_driving_ocean |
logical |
.false. |
|
lcondensation_par |
logical |
.false. |
|
llatent_heat |
logical |
.true. |
|
lparticles_radius_rpbeta |
(not found) |
||
lsweepup_par |
logical |
.false. |
|
mbar |
real |
1.0 |
|
nbin_initdist |
integer |
20 |
|
qplaw |
real |
0.0 |
|
radii_distribution |
real, dimension (ninit) |
0.0 |
|
rhopmat |
(not found) |
||
rpbeta0 |
real |
0.0 |
|
sigma_initdist |
real |
0.2 |
|
tau_damp_evap |
real |
0.0 |
|
tau_ocean_driving |
real |
0.0 |
|
tstart_sweepup_par |
real |
0.0 |
|
TTocean |
real |
300.0 |
|
vthresh_sweepup |
real |
-1.0 |
|
ztop_ocean |
real |
0.0 |
Module experimental/particles_radius_strubbechiang.f90
The following variables are part of the particles_radius_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
a0_initdist |
real |
5e-6 |
|
alpha_cond |
real |
1.0 |
|
ap0 |
real, dimension (ndustrad) |
0.0 |
|
ap1 |
real |
1.0 |
|
aphigh |
real |
2.0 |
|
aplow |
real |
1.0 |
|
apmin |
real |
0.0 |
|
cdtpc |
real |
0.2 |
|
cdtps |
real |
0.2 |
|
condensation_coefficient_type |
character (len=labellen) |
‘constant’ |
|
deltavp12_floor |
real |
0.0 |
|
diffusion_coefficient |
real |
1.0 |
|
eps_dtog |
(not found) |
||
initap |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
lborder_driving_ocean |
logical |
.false. |
|
lcondensation_par |
logical |
.false. |
|
lfixed_particles_radius |
logical |
.false. |
|
llatent_heat |
logical |
.true. |
|
lparticles_radius_rpbeta |
(not found) |
||
lsweepup_par |
logical |
.false. |
|
mbar |
real |
1.0 |
|
nbin_initdist |
integer |
20 |
|
qplaw |
real |
0.0 |
|
radii_distribution |
real, dimension (ndustrad) |
0.0 |
|
rhopmat |
(not found) |
||
rpbeta0 |
(not found) |
||
sigma_initdist |
real |
0.2 |
|
tau_damp_evap |
real |
0.0 |
|
tau_ocean_driving |
real |
0.0 |
|
tstart_sweepup_par |
real |
0.0 |
|
TTocean |
real |
300.0 |
|
vthresh_sweepup |
real |
-1.0 |
|
ztop_ocean |
real |
0.0 |
Module experimental/poisson_cyl.f90
The following variables are part of the poisson_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ipoisson_method |
character (len=labellen) |
‘nothing’ |
|
iteration_threshold |
real |
1e-3 |
|
kmax |
real |
0.0 |
|
lrazor_thin |
logical |
.true. |
Module experimental/poisson_expand.f90
The following variables are part of the poisson_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
kmax |
real |
0.0 |
|
lexpand_grid |
logical |
.false. |
|
lklimit_shear |
logical |
.false. |
|
lrazor_thin |
logical |
.false. |
|
lsemispectral |
logical |
.false. |
Module experimental/solid_cells_CGEO.f90
The following variables are part of the solid_cells_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
bc_thermo_type |
character(len=12) |
‘Dirichlet’ |
|
bc_vel_type |
character(len=12) |
‘no-slip’ |
|
charac_len |
real, dimension(maxterm) |
for local nusselt number |
|
flow_dir_set |
integer |
||
geometryfile |
character(len=32), dimension(maxterm) |
‘1stl’ |
|
init_uu |
real |
0 |
|
initsolid_cells |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
lset_flow_dir |
logical |
.false. |
|
nobjects |
integer |
||
reverse_normal_value |
integer |
1.0 |
|
SCALE_STL |
real |
1.0 |
|
solid_xpos |
real |
0.0 |
|
solid_ypos |
real |
0.0 |
|
solid_zpos |
real |
0.0 |
|
TOL_STL |
real |
1e-23 |
|
TX_STL |
real |
0.0 |
|
TY_STL |
real |
0.0 |
Module experimental/solid_cells_reactive.f90
The following variables are part of the solid_cells_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl_noise |
real |
0 |
|
cylinder_radius |
real, dimension(max_items) |
||
cylinder_temp |
real, dimension(max_items) |
330.0 |
|
cylinder_theta |
real, dimension(max_items) |
0.0 |
|
cylinder_xpos |
real, dimension(max_items) |
||
cylinder_xvel |
real, dimension(max_items) |
0.0 |
|
cylinder_ypos |
real, dimension(max_items) |
||
cylinder_yvel |
real, dimension(max_items) |
0.0 |
|
flow_dir_set |
real |
||
ineargridshift |
real |
1.0 |
|
init_uu |
real |
0 |
|
initsolid_cells |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
limit_close_linear |
real |
0.7 |
|
lset_flow_dir |
logical |
.false. |
|
ncylinders |
integer |
0 |
|
new_Stefan |
logical |
.false. |
|
nforcepoints |
integer |
200 |
|
nspheres |
integer |
0 |
|
object_skin |
real |
0 |
|
pressure0 |
real |
10.13e5 |
|
skin_depth |
real |
0 |
|
solid_reactions_intro_time |
real |
0.0 |
|
sphere_phi |
real, dimension(max_items) |
0.0 |
|
sphere_radius |
real, dimension(max_items) |
||
sphere_temp |
real, dimension(max_items) |
330.0 |
|
sphere_theta |
real, dimension(max_items) |
0.0 |
|
sphere_xpos |
real, dimension(max_items) |
||
sphere_xvel |
real, dimension(max_items) |
0.0 |
|
sphere_ypos |
real, dimension(max_items) |
||
sphere_yvel |
real, dimension(max_items) |
0.0 |
|
sphere_zpos |
real, dimension(max_items) |
||
sphere_zvel |
real, dimension(max_items) |
0.0 |
Module experimental/supernova.f90
The following variables are part of the interstellar_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl_SN |
real |
||
center_SN_x |
real |
||
center_SN_y |
real |
||
center_SN_z |
real |
||
cooling_select |
character (len=labellen) |
‘RBN’ |
|
energy_width_ratio |
real |
1. |
|
frac_ecr |
real |
0.1 |
|
frac_eth |
real |
0.9 |
|
h_SNI |
real |
||
h_SNII |
real |
||
heating_rate |
real |
0.015 |
|
heating_select |
character (len=labellen) |
‘wolfire’ |
|
initial_SNI |
integer |
0 |
|
initinterstellar |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
inner_shell_proportion |
real |
1. |
|
kampl_SN |
real |
||
kpara |
real |
0.025 |
|
kperp |
real |
0.05 |
|
lheatz_min |
logical |
.true. |
|
lSN_ecr |
logical |
.true. |
|
lSN_eth |
logical |
.true. |
|
lSN_fcr |
logical |
.false. |
|
lSN_mass |
logical |
.true. |
|
lSN_scale_rad |
logical |
.false. |
|
lSN_velocity |
logical |
.false. |
|
lSNI |
logical |
.true. |
|
lSNII |
logical |
.false. |
|
lSNII_gaussian |
logical |
.true. |
|
lthermal_hse |
logical |
.false. |
|
luniform_zdist_SNI |
logical |
.false. |
|
mass_profile |
character (len=labellen) |
‘gaussian3’ |
|
mass_SN |
real |
||
mass_width_ratio |
real |
1. |
|
N_mass |
real |
60.0 |
|
outer_shell_proportion |
real |
1.2 |
|
rho0ts |
real |
||
rho_SN_max |
real |
||
rho_SN_min |
real |
||
T0hs |
real |
||
t_next_SNI |
real |
0.0 |
|
t_next_SNII |
real |
0.0 |
|
thermal_profile |
character (len=labellen) |
‘gaussian3’ |
|
TT_SN_max |
real |
||
velocity_profile |
character (len=labellen) |
‘gaussian3’ |
|
velocity_SN |
real |
||
velocity_width_ratio |
real |
1. |
|
width_SN |
real |
Module experimental/test_chemistry.f90
The following variables are part of the chemistry_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplchem |
real |
1. |
|
amplchemk |
real, dimension(nchemspec) |
0. |
|
amplchemk2 |
real, dimension(nchemspec) |
0. |
|
chem_diff |
real |
0. |
|
Cp_const |
(not found) |
||
Cv_const |
real |
||
Diff_coef_const |
real |
||
file_name |
character(len=60) |
‘nothing’ |
|
flame_pos |
real |
0. |
|
global_phi |
real |
||
init_pressure |
real |
10.13e5 |
|
init_rho |
real |
1. |
|
init_rho2 |
real |
1. |
|
init_TT1 |
real |
298. |
|
init_TT2 |
real |
2400. |
|
init_ux |
real |
0. |
|
init_uy |
real |
0. |
|
init_uz |
real |
0. |
|
init_x1 |
real |
-0.2 |
|
init_x2 |
real |
0.2 |
|
init_y1 |
real |
-0.2 |
|
init_y2 |
real |
0.2 |
|
init_z1 |
real |
-0.2 |
|
init_z2 |
real |
0.2 |
|
init_zz1 |
real |
0.01 |
|
init_zz2 |
real |
0.2 |
|
initchem |
character(len=labellen), dimension(ninit) |
‘nothing’ |
|
kx_chem |
real |
1. |
|
ky_chem |
real |
1. |
|
kz_chem |
real |
1. |
|
l1step_test |
logical |
.false. |
|
lambda_const |
real |
||
latmchem |
logical |
.false. |
|
lchemistry_diag |
logical |
.false. |
|
lcloud |
logical |
.false. |
|
ldamp_zone_for_NSCBC |
logical |
.false. |
|
lDiff_lewis |
logical |
.false. |
|
lDiff_simple |
logical |
.false. |
|
lfilter_strict |
logical |
.false. |
|
lfix_Pr |
logical |
.false. |
|
lfix_Sc |
logical |
.false. |
|
lFlux_simple |
logical |
.false. |
|
lheatc_chemistry |
logical |
.true. |
|
lhotspot |
logical |
.false. |
|
linit_density |
logical |
.false. |
|
linit_temperature |
logical |
.false. |
|
lreac_as_aux |
logical |
.false. |
|
lSmag_diffusion |
logical |
.false. |
|
lSmag_heat_transport |
logical |
.false. |
|
lspecies_cond_simplified |
logical |
.true. |
|
lT_const |
logical |
.false. |
|
lT_tanh |
logical |
.false. |
|
lThCond_simple |
logical |
.false. |
|
nu_spec |
real, dimension(nchemspec) |
0. |
|
Pr_turb |
real |
0.7 |
|
prerun_directory |
character(len=60) |
‘nothing’ |
|
reac_rate_method |
character(len=30) |
‘chemkin’ |
|
Sc_number |
real |
0.7 |
, Pr_number=0.7 |
str_thick |
real |
0.02 |
|
visc_const |
real |
||
widthchem |
real |
1. |
|
z_cloud |
real |
0. |
Module experimental/test_eos_chemistry.f90
The following variables are part of the eos_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
cp |
real |
||
cs0 |
real |
1. |
|
error_cp |
real |
1e-6 |
|
gamma |
real |
5./3. |
|
mu |
real |
1. |
|
rho0 |
real |
1. |
Module inactive/gravitational_waves_hTXk_no_xpara.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplgij |
real |
0. |
|
amplhij |
real |
0. |
|
cstress_prefactor |
character (len=labellen) |
‘6’ |
|
ctrace_factor |
character (len=labellen) |
‘1/3’ |
|
fourthird_in_stress |
character (len=labellen) |
‘4/3’ |
|
initgij |
character (len=labellen) |
‘nothing’ |
|
inithij |
character (len=labellen) |
‘nothing’ |
|
lggTX_as_aux |
logical |
.true. |
|
lhhTX_as_aux |
logical |
.true. |
|
lno_transverse_part |
logical |
.false. |
|
lStress_as_aux |
logical |
.true. |
Module inactive/testfield.f90
The following variables are part of the testfield_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
B_ext |
real, dimension(3) |
(/0.,0.,0./) |
|
initaatest |
character (len=labellen) |
‘zero’ |
|
xextent |
logical |
.true. |
|
zextent |
logical |
.true. |
Module inactive/testfield_xz.f90
The following variables are part of the testfield_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
B_ext |
real, dimension(3) |
(/0.,0.,0./) |
|
initaatest |
character (len=labellen) |
‘zero’ |
|
zextent |
logical |
.true. |
Module magnetic/maxwell.f90
The following variables are part of the magnetic_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
alpha_inflation |
real |
0. |
|
ampl_uy |
real |
0. |
|
amplaa |
real |
1e-4 |
|
B_ext |
real, dimension(3) |
0.0 |
|
beta_inflation |
real |
0. |
|
conductivity |
character (len=labellen) |
‘const’ |
|
cutoff_aa |
real |
0.0 |
|
initaak |
character (len=labellen) |
‘nothing’ |
|
initeek |
character (len=labellen) |
‘nothing’ |
|
initpower2_aa |
real |
-11./3. |
|
initpower_aa |
real |
0.0 |
|
k1hel |
real |
0. |
|
k2hel |
real |
1. |
|
kgaussian_aa |
real |
0. |
|
kpeak_aa |
real |
10. |
|
kx_aa |
integer |
0 |
|
ky_aa |
integer |
0 |
|
kz_aa |
integer |
0 |
|
laa_as_aux |
logical |
.false. |
|
lbb_as_aux |
logical |
.true. |
|
lee_as_aux |
logical |
.true. |
|
lemf |
logical |
.false. |
|
linflation |
logical |
.false. |
|
ljj_as_aux |
logical |
.false. |
|
lminus_mode |
logical |
.false. |
|
lpolarization_basis |
logical |
.false. |
|
lreheating |
logical |
.false. |
|
lscale_tobox |
logical |
.true. |
|
lskip_projection_aa |
logical |
.false. |
|
lswitch_sign_e2 |
logical |
.false. |
|
ncutoff_aa |
real |
1. |
|
phase_aa |
real |
0. |
|
relhel_aa |
real |
1. |
|
rescale_aa |
real |
0.0 |
|
sigma |
real |
0. |
|
sigma_t1 |
real |
0. |
|
sigma_t2 |
real |
0. |
|
t1_sigma |
real |
0. |
|
t2_sigma |
real |
0. |
|
ux_const |
real |
0. |
Module magnetic/meanfield.f90
The following variables are part of the magn_mf_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
init_mf |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
x1_alp |
real |
0. |
|
x2_alp |
real |
0. |
|
y1_alp |
real |
0. |
|
y2_alp |
real |
0. |
Module magnetic/meanfield_demfdt.f90
The following variables are part of the magn_mf_demfdt_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
eta_emf_over_etat |
real |
0. |
|
initemf |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
lgive_eta_emf |
logical |
||
tau1_emf |
real |
0. |
|
tau_emf |
real |
0. |
Module obsolete/density_anelastic.f90
The following variables are part of the density_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampllnrho |
real, dimension (ninit) |
0.0 |
|
amplrho |
real, dimension (ninit) |
0.0 |
|
b_ell |
(not found) |
||
beta_glnrho_global |
(not found) |
||
co1_ss |
real |
0. |
|
co2_ss |
real |
0. |
|
coeflnrho |
complex |
0. |
|
cs2bot |
(not found) |
||
cs2top |
(not found) |
||
density_floor |
real |
-1.0 |
|
eps_planet |
real |
0.5 |
|
hh0 |
real |
0.0 |
|
hoverr |
real |
0.05 |
|
idiff |
character (len=labellen), dimension(ndiff_max) |
‘’ |
|
initlnrho |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
kx_lnrho |
real, dimension (ninit) |
1.0 |
|
kxx_lnrho |
real, dimension (ninit) |
0.0 |
|
ky_lnrho |
real, dimension (ninit) |
1.0 |
|
kyy_lnrho |
real, dimension (ninit) |
0.0 |
|
kz_lnrho |
real, dimension (ninit) |
1.0 |
|
kzz_lnrho |
real, dimension (ninit) |
0.0 |
|
lanti_shockdiffusion |
logical |
.false. |
|
lcontinuity_gas |
logical |
.true. |
|
ldensity_nolog |
(not found) |
||
ldiffusion_nolog |
logical |
.false. |
|
lexponential_smooth |
logical |
.false. |
|
lnrho_const |
real |
0.0 |
|
lnrho_z_shift |
real |
0.0 |
|
lrho_as_aux |
logical |
.false. |
|
lshare_plaw |
logical |
.false. |
|
lwrite_stratification |
(not found) |
||
mpoly |
real |
||
phase_lnrho |
real, dimension (ninit) |
0.0 |
|
plaw |
real, target |
0.0 |
|
powerlr |
real |
3.0 |
|
q_ell |
real |
5.0 |
|
radial_percent_smooth |
real |
10. |
|
radius_lnrho |
real, dimension (ninit) |
0.5 |
|
rbound |
(not found) |
||
rho_const |
real |
1.0 |
|
rho_left |
real, dimension (ninit) |
1.0 |
|
rho_right |
real, dimension (ninit) |
1.0 |
|
rshift |
real |
0.0 |
|
Sigma1 |
real |
150. |
|
strati_type |
character (len=labellen) |
‘lnrho_ss’ |
|
wdamp |
real |
0. |
|
widthlnrho |
real, dimension (ninit) |
0.1 |
|
xblob |
real |
0. |
|
yblob |
real |
0. |
|
zblob |
real |
0. |
|
zoverh |
real |
1.5 |
Module obsolete/magnetic_axisym.f90
The following variables are part of the magnetic_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl_B0 |
real |
0. |
|
amplaa |
real, dimension (ninit) |
0.0 |
|
axisr1 |
real, dimension(3) |
(/0,0,1/) |
|
axisr2 |
real, dimension(3) |
(/1,0,0/) |
|
axisr3 |
real, dimension(3) |
(/1,0,0/) |
|
B_ext |
real, dimension(3) |
(/0.,0.,0./) |
|
by_left |
real |
0. |
|
by_right |
real |
0. |
|
bz_left |
real |
0. |
|
bz_right |
real |
0. |
|
center1_x |
real |
0. |
|
center1_y |
real |
0. |
|
center1_z |
real |
0. |
|
coefaa |
complex, dimension(3) |
(/0.,0.,0./) |
|
coefbb |
complex, dimension(3) |
(/0.,0.,0./) |
|
cutoff_aa |
real |
0. |
|
dispr1 |
real, dimension(3) |
(/0.,0.5,0./) |
|
dispr2 |
real, dimension(3) |
(/0.,-0.5,0./) |
|
dispr3 |
real, dimension(3) |
(/0.,-0.5,0./) |
|
epsilonaa |
real |
1e-2 |
|
fluxtube_border_width |
real |
||
fring1 |
real |
0. |
|
fring2 |
real |
0. |
|
fring3 |
real |
0. |
|
fring_profile |
character (len=labellen) |
‘tanh’ |
|
inclaa |
real |
0. |
|
initaa |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
initpower_aa |
real |
0. |
|
Iring1 |
real |
0. |
|
Iring2 |
real |
0. |
|
Iring3 |
real |
0. |
|
kx_aa |
real, dimension (ninit) |
1. |
|
ky_aa |
real, dimension (ninit) |
1. |
|
kz_aa |
real, dimension (ninit) |
1. |
|
lB_ext_pot |
logical |
.false. |
|
lbb_as_aux |
logical |
.false. |
|
lbbt_as_aux |
logical |
.false. |
|
lbext_curvilinear |
logical |
.true. |
|
lcheck_positive_va2 |
logical |
.false. |
|
lforce_free_test |
logical |
.false. |
|
lgauss |
logical |
.false. |
|
ljj_as_aux |
logical |
.false. |
|
ljjt_as_aux |
logical |
.false. |
|
lneutralion_heat |
logical |
.true. |
|
lohmic_heat |
logical |
.true. |
|
lpress_equil |
logical |
.false. |
|
lpress_equil_via_ss |
logical |
.false. |
|
mu_ext_pot |
real |
-0.5 |
|
mu_r |
real |
-0.5 |
(still needed for backwards compatibility) |
N_modes_aa |
integer |
1 |
|
nrings |
integer |
2 |
|
phasex_aa |
real, dimension (ninit) |
0. |
|
phasey_aa |
real, dimension (ninit) |
0. |
|
phasez_aa |
real, dimension (ninit) |
0. |
|
radius |
real |
.1 |
|
rm_ext |
real |
0. |
|
rm_int |
real |
0. |
|
rmode |
real |
1. |
|
Rring1 |
real |
1. |
|
Rring2 |
real |
1. |
|
Rring3 |
real |
1. |
|
va2max_jxb |
real |
0. |
|
va2power_jxb |
integer |
5 |
|
widthaa |
real |
.5 |
|
wr1 |
real |
0.3 |
|
wr2 |
real |
0.3 |
|
wr3 |
real |
0.3 |
|
x0aa |
real |
0. |
|
z0aa |
real |
0. |
|
zmode |
real, target |
1. |
(temporary) |
Module obsolete/magnetic_old.f90
The following variables are part of the magnetic_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl_B0 |
real |
0.0 |
|
amplaa |
real, dimension (ninit) |
0.0 |
|
B_ext |
real, dimension(3) |
(/0.0,0.0,0.0/) |
|
by_left |
real |
0.0 |
|
by_right |
real |
0.0 |
|
bz_left |
real |
0.0 |
|
bz_right |
real |
0.0 |
|
center1_x |
real |
0.0 |
|
center1_y |
real |
0.0 |
|
center1_z |
real |
0.0 |
|
coefaa |
complex, dimension(3) |
(/0.0,0.0,0.0/) |
|
coefbb |
complex, dimension(3) |
(/0.0,0.0,0.0/) |
|
cutoff_aa |
real |
0.0 |
|
epsilonaa |
real |
0.01 |
|
eta_jump |
real |
0.0 |
|
fluxtube_border_width |
real |
||
inclaa |
real |
0.0 |
|
initaa |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
initpower_aa |
real |
0.0 |
|
kx_aa |
real, dimension (ninit) |
1.0 |
|
ky_aa |
real, dimension (ninit) |
1.0 |
|
kz_aa |
real, dimension (ninit) |
1.0 |
|
lB_ext_pot |
logical |
.false. |
|
lbb_as_aux |
logical |
.false. |
|
lbbt_as_aux |
logical |
.false. |
|
lbext_curvilinear |
logical |
.true. |
|
lcheck_positive_va2 |
logical |
.false. |
|
lforce_free_test |
logical |
.false. |
|
lgauss |
logical |
.false. |
|
ljj_as_aux |
logical |
.false. |
|
ljjt_as_aux |
logical |
.false. |
|
lneutralion_heat |
logical |
.true. |
|
lohmic_heat |
logical |
.true. |
|
lpress_equil |
logical |
.false. |
|
lpress_equil_alt |
logical |
.false. |
|
lpress_equil_via_ss |
logical |
.false. |
|
mu_ext_pot |
real |
-0.5 |
|
mu_r |
real |
-0.5 |
(still needed for backwards compatibility) |
N_modes_aa |
integer |
1 |
|
phasex_aa |
real, dimension (ninit) |
0.0 |
|
phasey_aa |
real, dimension (ninit) |
0.0 |
|
phasez_aa |
real, dimension (ninit) |
0.0 |
|
radius |
real |
0.1 |
|
relhel_aa |
real |
1. |
|
rm_ext |
real |
0.0 |
|
rm_int |
real |
0.0 |
|
rmode |
real |
1.0 |
|
rnoise_ext |
real |
||
rnoise_int |
real |
||
va2max_jxb |
real |
0.0 |
|
va2power_jxb |
integer |
5 |
|
widthaa |
real |
0.5 |
|
x0aa |
real |
0.0 |
|
z0aa |
real |
0.0 |
|
zmode |
real, target |
1.0 |
(temporary) |
Module obsolete/particles_nbody.f90
The following variables are part of the particles_nbody_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
accrete_hills_frac |
real, dimension(nspar) |
0.2 |
|
bcspx |
(not found) |
||
bcspy |
(not found) |
||
bcspz |
(not found) |
||
cdtpnbody |
real |
0.1 |
|
delta_vsp0 |
real |
1.0 |
|
density_scale |
real |
0.001 |
|
eccentricity |
real |
0.0 |
|
final_ramped_mass |
real, dimension(nspar) |
0.0 |
|
GNewton |
real |
||
icreate |
integer |
100 |
|
initvvsp |
character (len=labellen) |
‘nothing’ |
|
initxxsp |
character (len=labellen) |
‘random’ |
|
istar |
integer |
1 |
|
laccrete_when_create |
logical |
.true. |
|
laccretion |
logical, dimension(nspar) |
.false. |
|
ladd_mass |
logical, dimension(nspar) |
.false. |
|
lcreate_dust |
logical |
.true. |
|
lcreate_gas |
logical |
.true. |
|
lcreate_sinks |
logical |
.false. |
|
lcylindrical_gravity_nbody |
logical, dimension(nspar) |
.false. |
|
ldt_nbody |
logical |
.true. |
|
lexclude_frozen |
logical |
.false. |
|
linertial_frame |
logical |
.true. |
|
linterpolate_gravity |
logical |
.false. |
|
linterpolate_quadratic_spline |
logical |
.false. |
|
lramp |
logical |
.false. |
|
lretrograde |
logical |
.false. |
|
maxsink |
integer |
10*nspar |
|
pmass |
real, dimension(nspar) |
0.0 |
|
r_smooth |
real, dimension(nspar) |
||
ramp_orbits |
integer |
5 |
|
semimajor_axis |
real |
1.0 |
|
vspx0 |
real, dimension(nspar) |
0.0 |
|
vspy0 |
real, dimension(nspar) |
0.0 |
|
vspz0 |
real, dimension(nspar) |
0.0 |
|
xsp0 |
real, dimension(nspar) |
0.0 |
|
ysp0 |
real, dimension(nspar) |
0.0 |
|
zsp0 |
real, dimension(nspar) |
0.0 |
Module obsolete/radiation_fld.f90
The following variables are part of the radiation_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
a_SB |
real |
1. |
|
ampl_pert |
real |
0 |
|
amplee |
real |
0 |
|
c_gam |
real |
100 |
|
initrad |
character (len=labellen) |
‘equil’ |
|
k_B_radiation |
real |
1. |
k_B*m_unit in to not get to big numbers |
kappa_es_radiation |
real |
0 |
|
mbar |
real |
1. |
mbar*m_unit in to not get to big numbers |
opas |
real |
1e-8 |
|
pertee |
character (len=labellen) |
‘none’ |
Module obsolete/radiation_nongrey.f90
The following variables are part of the radiation_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplkapparho |
real |
1.0 |
|
amplSrad |
real |
1.0 |
|
angle_weight |
character (len=labellen) |
‘constant’ |
|
bcx_rad |
character (len=2*bclen+1), dimension(nnu) |
||
bcy_rad |
character (len=2*bclen+1), dimension(nnu) |
||
bcz_rad |
character (len=2*bclen+1), dimension(nnu) |
||
Frad_boundary_ref |
real |
0.0 |
|
kappa_cst |
real |
1.0 |
|
kapparho_const |
real |
1.0 |
|
lcommunicate |
logical |
.true. |
|
lintrinsic |
logical |
.true. |
|
lrad_cool_diffus |
logical |
.false. |
|
lrad_debug |
logical |
.false. |
|
lrad_pres_diffus |
logical |
.false. |
|
lradflux |
logical |
.false. |
|
lrevision |
logical |
.true. |
|
nufreq |
real, dimension(nnu) |
||
opacity_type |
character (len=labellen),dimension(nnu) |
‘Planck’ |
|
rad2max |
integer |
1 |
|
radius_kapparho |
real |
1.0 |
|
radius_Srad |
real |
1.0 |
|
radx |
integer |
0 |
|
rady |
integer |
0 |
|
radz |
integer |
1 |
|
scalefactor_Srad |
real |
1. |
|
source_function_type |
character (len=labellen),dimension(nnu) |
‘LTE’ |
|
Srad_const |
real |
1.0 |
|
tau_bot |
real |
0.0 |
|
tau_top |
real |
0.0 |
|
TT_bot |
real |
0.0 |
|
TT_top |
real |
0.0 |
Module obsolete/radiation_ray_periodic.f90
The following variables are part of the radiation_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplkapparho |
real |
1.0 |
|
amplSrad |
real |
1.0 |
|
bc_rad |
character (len=2*bclen+1), dimension(3) |
(/’0:0’,’0:0’,’S:0’/) |
|
kappa_cst |
real |
1.0 |
|
kapparho_const |
real |
1.0 |
|
lcommunicate |
logical |
.true. |
|
lintrinsic |
logical |
.true. |
|
lrad_debug |
logical |
.false. |
|
lradflux |
logical |
.false. |
|
lrevision |
logical |
.true. |
|
opacity_type |
character (len=labellen) |
‘Hminus’ |
|
rad2max |
integer |
1 |
|
radius_kapparho |
real |
1.0 |
|
radius_Srad |
real |
1.0 |
|
radx |
integer |
0 |
|
rady |
integer |
0 |
|
radz |
integer |
1 |
|
source_function_type |
character (len=labellen) |
‘LTE’ |
|
Srad_const |
real |
1.0 |
|
tau_bot |
real |
0.0 |
|
tau_top |
real |
0.0 |
|
TT_bot |
real |
0.0 |
|
TT_top |
real |
0.0 |
Module obsolete/special/axionSU2back.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
axion_sum_range |
real, dimension (2) |
(/0.,1./) |
|
chi_prefactor |
real |
.49 |
|
chidot0 |
real |
0. |
|
dk |
real |
1e-2 |
|
fdecay |
real |
.003 |
|
g |
real |
1.11e-2 |
|
H |
real |
1.04e-6 |
|
k0 |
real |
1e-2 |
|
lam |
real |
500. |
|
lanalytic |
logical |
.false. |
|
lconf_time |
logical |
.false. |
|
ldo_adjust_krange |
logical |
.true. |
|
lim_psi_TR |
logical |
.false. |
|
lleft_psiL_TL |
logical |
.false. |
|
llnk_spacing |
logical |
.false. |
|
llnk_spacing_adjustable |
logical |
.false. |
|
lswap_sign |
logical |
.false. |
|
lvariable_k |
logical |
.false. |
|
mu |
real |
1.5e-4 |
|
Ndivt |
integer |
100 |
|
nmax0 |
real |
3. |
|
nmin0 |
real |
-1. |
|
Q0 |
real |
3e-4 |
|
Qdot0 |
real |
0. |
Module obsolete/temperature.f90
The following variables are part of the entropy_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl_ss |
real |
0. |
|
epsilon_ss |
real |
0. |
|
grads0 |
(not found) |
||
initlnTT |
character (len=labellen) |
‘nothing’ |
|
isothtop |
(not found) |
||
khor_ss |
real |
1. |
|
mpoly0 |
(not found) |
||
mpoly1 |
(not found) |
||
mpoly2 |
(not found) |
||
radius_ss |
real |
0.1 |
|
ss_left |
real |
||
ss_right |
real |
||
thermal_background |
real |
0. |
|
thermal_peak |
real |
0. |
|
thermal_scaling |
real |
1. |
|
widthss |
real |
2* |
Module obsolete/temperature_TT.f90
The following variables are part of the entropy_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl_lnTT |
real |
0. |
|
center1_x |
real |
0. |
|
center1_y |
real |
0. |
|
center1_z |
real |
0. |
|
Fbot |
real |
||
initlnTT |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
Kmax |
real |
0. |
|
Kmin |
real |
0. |
|
kx_lnTT |
real |
1.0 |
|
ky_lnTT |
real |
1.0 |
|
kz_lnTT |
real |
1.0 |
|
lnTT_const |
real |
0.0 |
|
lnTT_left |
real |
1.0 |
|
lnTT_right |
real |
1.0 |
|
mpoly0 |
(not found) |
||
mpoly1 |
(not found) |
||
r_bcz |
real |
0. |
|
radius_lnTT |
real |
0.1 |
|
Tbump |
real |
0. |
|
TT_const |
real |
1.0 |
|
widthlnTT |
real |
2* |
Module special/advective_gauge.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl |
real |
1e-3 |
|
init |
character(len=50) |
‘zero’ |
|
kx |
real |
1. |
|
ky |
real |
0. |
|
kz |
real |
0. |
|
laa_adv_as_aux |
logical |
.false. |
|
ladvecto_resistive |
logical |
.true. |
Module special/alphadisk.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
alpha |
real |
real(1.0d-2) |
|
ampl_nut |
real |
0.0 |
|
dlnHdlnR |
real |
1.28571428571 |
|
initsigma |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
inittmid |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
lambda_nut |
real |
0.0 |
|
mdot_input |
real |
real(1.0d-7) |
Mass accretion rate in Msun/yr |
mumol |
real |
2.34 |
|
mwind_input |
real |
real(1.0d-8) |
Wind mass loss rate in Msun/yr |
nsigma_table |
integer |
500 |
Resolution of look-up tables for the |
nut_constant |
real |
0.0 |
|
plaw_density |
real |
1.0 |
|
plaw_r0 |
real |
1.0 |
|
plaw_temperature |
real |
0.5 |
|
r0_gaussian |
real |
1.0 |
|
radius_star |
real |
1e11 |
Stellar radius, in cm |
sigma0 |
real |
1700.0 |
|
sigma_floor |
real |
real(1d-4) |
Density floor of the simulation, also |
sigma_middle |
real |
1. |
Dividing line between linear and log |
temperature0 |
real |
280.0 |
|
temperature_background |
real |
10. |
Background temperature of disk |
temperature_model |
character (len=labellen) |
‘radiative’ |
|
temperature_precision |
real |
0.1 |
Newton-Raphson iteration precision |
temperature_star |
real |
4000 |
Stellar temperature, in Kelvin |
tmid_table_buffer |
real |
0.01 |
Small buffer for temperature, so that |
width_gaussian |
real |
1.0 |
Module special/ascale_collapse.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ascale_type |
(not found) |
||
k_ascale_collapse |
real |
1. |
Module special/atmosphere.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
aerosol_present |
real |
1. |
|
bc_lnrho_aver_final |
real |
||
bc_qv_aver_final |
real |
||
delta |
real |
||
dsize0_max |
real |
0. |
|
dsize0_min |
real |
0. |
|
dsize_max |
real |
0. |
|
dsize_min |
real |
0. |
|
dYw |
real |
1. |
|
dYw1 |
real |
||
dYw2 |
real |
||
lACTOS |
logical |
.false. |
|
laverage |
logical |
.false. |
|
lboundary_layer |
logical |
.false. |
|
lbuffer_zone_chem |
logical |
.false. |
|
lbuffer_zone_T |
logical |
.false. |
|
lbuffer_zone_uy |
logical |
.false. |
|
lbuffer_zone_uz |
logical |
.false. |
|
lbuoyancy_x |
logical |
.false. |
|
lbuoyancy_y |
logical |
.false. |
|
lbuoyancy_z |
logical |
.false. |
|
lbuoyancy_z_model |
logical |
.false. |
|
lgrav_LES |
logical |
.false. |
|
llarge_part |
logical |
.false. |
|
lLES |
logical |
.false. |
|
llognormal |
logical |
.false. |
|
logrho_ref2_bot |
real |
||
logrho_ref2_top |
real |
||
logrho_ref_bot |
real |
||
logrho_ref_top |
real |
||
lsmall_large_part |
logical |
.false. |
|
lsmall_part |
logical |
.false. |
|
nd0 |
real |
||
Ntot |
real |
1e3 |
|
Ntot_input |
real |
||
Ntot_ratio |
real |
1. |
|
Period |
real |
1. |
|
PP |
real |
||
pp_init |
real |
3.013e5 |
|
qwater0 |
real |
||
r0 |
real |
||
r02 |
real |
||
rotat_position |
real |
0. |
|
rotat_ux |
real |
0. |
|
rotat_uy |
real |
0. |
|
sigma |
real |
1. |
|
T_ampl |
real |
||
t_final |
real |
||
TT0 |
real |
||
TT1 |
real |
0. |
|
TT2 |
real |
0. |
|
TT_ref_bot |
real |
||
TT_ref_top |
real |
||
ux_bot |
real |
0. |
|
ux_bz |
real |
||
ux_ref_top |
real |
0. |
|
uy_bot |
real |
0. |
|
uy_bz |
real |
||
UY_ref |
real |
0. |
|
uy_ref_top |
real |
0. |
|
uz_bc |
real |
0. |
|
uz_ref_bot |
real |
0. |
|
uz_ref_top |
real |
0. |
Module special/axionSU2back.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
alpha |
real |
0.1 |
|
axion_sum_range |
real, dimension (2) |
(/0.,1./) |
|
chi_prefactor |
real |
.49 |
|
chidot0 |
real |
0. |
|
dk |
real |
1e-2 |
|
fdecay |
real |
.003 |
|
g |
real |
1.11e-2 |
|
H |
real |
1.04e-6 |
|
inflaton_ini |
real |
16. |
|
k0 |
real |
1e-2 |
|
lam |
real |
500. |
|
lanalytic |
logical |
.false. |
|
lconf_time |
logical |
.false. |
|
ldo_adjust_krange |
logical |
.true. |
|
lhubble |
logical |
.false. |
|
lim_psi_TR |
logical |
.false. |
|
lleft_psiL_TL |
logical |
.false. |
|
llnk_spacing |
logical |
.false. |
|
llnk_spacing_adjustable |
logical |
.false. |
|
lSchwinger_scalar |
logical |
.false. |
|
lswap_sign |
logical |
.false. |
|
lvariable_k |
logical |
.false. |
|
m_alpha |
real |
3.285e-11 |
|
m_inflaton |
real |
1.275e-7 |
|
m_phi |
real |
1.275e-7 |
|
mscal |
real |
0. |
|
mu |
real |
1.5e-4 |
|
n_alpha |
real |
1.5 |
|
Ndivt |
integer |
100 |
|
nmax0 |
real |
3. |
|
nmin0 |
real |
-1. |
|
phi_ini |
real |
16. |
|
Q0 |
real |
3e-4 |
|
Qdot0 |
real |
0. |
|
sgn |
real |
1. |
|
sgn_g |
real |
-1. |
|
V_choice |
character (len=labellen) |
‘quadratic’ |
Module special/axionU1back.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
alpf |
real |
50. |
|
alpha |
real |
0.1 |
|
alpha1_gmssm |
real |
6.5e-11 |
|
const_sigma |
real |
0.0 |
|
dk |
real |
1.06e-4 |
|
dphi_ini |
real |
-1.687e-7 |
|
H |
real |
1.04e-6 |
|
k0 |
real |
1.06e-4 |
|
lambda_gmssm |
real |
1.0 |
|
ldo_adjust_krange |
logical |
.false. |
|
lhubble |
logical |
.true. |
|
llnk_spacing |
logical |
.false. |
|
llnk_spacing_adjustable |
logical |
.false. |
|
lquant_filter |
logical |
.true. |
|
lswap_sign |
logical |
.false. |
|
m_alpha |
real |
3.285e-11 |
|
m_phi |
real |
1.06e-6 |
|
mpl2 |
real |
1. |
|
n_alpha |
real |
1.5 |
|
Ndivt |
integer |
40 |
|
nmax0 |
real |
3. |
|
nmin0 |
real |
-1. |
|
phi_0 |
real |
0.014 |
|
phi_ini |
real |
0.7 |
|
V_choice |
character (len=labellen) |
‘quadratic’ |
Module special/backreact_infl.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampldphi |
real |
.0 |
|
amplee_BD_prefactor |
real |
0. |
|
amplphi |
real |
.1 |
|
ascale_ini |
real |
1. |
|
axionmass |
real |
1.06e-6 |
|
c_light_axion |
real |
1. |
|
cutoff_dphi |
real |
0. |
|
cutoff_phi |
real |
0. |
|
deriv_prefactor_ee |
real |
-1. |
|
dphi0 |
real |
-1.69e-7 |
|
echarge_type |
character (len=50) |
‘const’ |
|
eps |
real |
.01 |
|
Gamma_phi0 |
real |
PAR_DOC: damping factor for phi above aphimax |
|
heating_choice |
character (len=labellen) |
‘Hscript_max’ |
|
Hscript0 |
real |
0. |
|
Hscript_choice |
character (len=labellen) |
‘default’ |
|
infl_v |
real |
.1 |
|
init_rho_chi |
character (len=50) |
‘zero’ |
|
init_rho_rad |
character (len=50) |
‘zero’ |
|
initpower2_dphi |
real |
0. |
|
initpower2_phi |
real |
0. |
|
initpower_dphi |
real |
0. |
|
initpower_phi |
real |
0. |
|
initspecial |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
kgaussian_phi |
real |
0. |
|
kpeak_dphi |
real |
0. |
|
kpeak_phi |
real |
0. |
|
kx_phi |
real |
1. |
|
ky_phi |
real |
0. |
|
kz_phi |
real |
0. |
|
la2rhop_wrong_factor |
logical |
.false. |
PAR_DOC: should be false to have correct results; kept for backward compatibility |
lambda_axion |
real |
0. |
|
lapply_BD_kNy_factor |
logical |
.false. |
PAR_DOC: apply $1/N^(D/2)$ factor in the Bunch-Davies initial condition. |
lappy_BD_k1D_factor |
logical |
.false. |
PAR_DOC: apply $k_1^D$ factor in the Bunch-Davies initial condition (NOTE typo in name!) |
lBD_scaling_wHubble |
logical |
.true. |
PAR_DOC: Bunch-Davies scaling with Hubble (true for backward compatibility, but should be false to be correct) |
lcompute_dphi0 |
logical |
.true. |
|
lconf_time |
logical |
.true. |
|
ldefine_a2rhopm_without_Vpotential |
logical |
.false. |
PAR_DOC: should be false to have correct results |
lem_backreact |
logical |
.true. |
|
lflrw |
logical |
.false. |
|
linv_BD |
logical |
.true. |
PAR_DOC: apply forward transform in the Bunch-Davies initial condition. |
lno_noise_dphi |
logical |
.false. |
|
lno_noise_phi |
logical |
.false. |
|
lrho_chi |
logical |
.false. |
|
lrho_chi_inhom |
logical |
.false. |
PAR_DOC: inhomogeneous heating |
lrho_rad |
logical |
.false. |
PAR_DOC: radiation from inflaton decay |
lscale_tobox |
logical |
.true. |
|
lsolve_for_phi_always |
logical |
.true. |
PAR_DOC: misnomer: is now used for switching off the phi solver: is now used for switching off the phi solver |
lsolve_for_phi_switch |
logical |
.true. |
PAR_DOC: switch must be on for automatically switching off the phi solver. |
lwstate_crit |
logical |
.true. |
PAR_DOC: lwstate_crit switch (would put phi=0, is false by default) |
lwstate_crit_old |
logical |
.false. |
PAR_DOC: lwstate_crit_old (to restore the old wstate criterion used in the 0d-tests/reheating autotest) |
ncutoff_phi |
real |
1. |
|
offset |
real |
0. |
|
phase_phi |
real |
0. |
|
phi0 |
real |
.44 |
|
rho_chi_init |
real |
0. |
|
scale_rho_chi_Heqn |
real |
1. |
|
scale_rho_rad_Heqn |
real |
1. |
|
width |
real |
.1 |
|
wstate_crit |
real |
0.333333333 |
PAR_DOC: critical w (EoS) value (1/3) |
wstate_tolerance |
real |
0. |
PAR_DOC: tolerance w (EoS) value |
Module special/chem_stream.f90
The following variables are part of the chem_stream_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
H_max |
real |
||
index_H2 |
integer |
0 |
|
index_H2O |
integer |
0 |
|
index_N2 |
integer |
0 |
|
index_O2 |
integer |
0 |
|
init_lnrho |
real |
||
init_lnTT1 |
real |
5.7 |
|
init_p2 |
real |
1.013e6 |
|
init_TT1 |
real |
400. |
|
init_TT2 |
real |
2400. |
|
init_ux |
real |
||
init_x1 |
real |
-0.2 |
|
init_x2 |
real |
0.2 |
|
initstream |
character (len=labellen) |
‘default’ |
|
lT_prof1 |
logical |
.true. |
|
lT_prof2 |
logical |
.false. |
|
lT_tanh |
logical |
.false. |
|
rho_init |
real |
1. |
|
str_thick |
real |
0. |
|
T_init |
real |
1. |
|
ux_init |
real |
0. |
|
Y1_init |
real |
1. |
|
Y2_init |
real |
1. |
|
Y3_init |
real |
1. |
Module special/chiral_mhd.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplmu5 |
real |
0. |
|
amplmuS |
real |
0. |
|
cdtchiral |
real |
0.4 |
|
coef_mu5 |
real |
0. |
|
coef_muS |
real |
0. |
|
cutoff_mu5 |
real |
0. |
|
cutoff_muS |
real |
0. |
|
initpower_mu5 |
real |
0. |
|
initpower_muS |
real |
0. |
|
initspecial |
character (len=labellen) |
‘nothing’ |
|
kgaussian_mu5 |
real |
0. |
|
kgaussian_muS |
real |
0. |
|
kpeak_mu5 |
real |
0. |
|
kpeak_muS |
real |
0. |
|
kx_mu5 |
real |
0. |
|
kx_muS |
real |
0. |
|
ky_mu5 |
real |
0. |
|
ky_muS |
real |
0. |
|
kz_mu5 |
real |
0. |
|
kz_muS |
real |
0. |
|
lCVE |
logical |
.false. |
|
lmu5adv |
logical |
.true. |
|
lmuS |
logical |
.false. |
|
lmuSadv |
logical |
.true. |
|
lremove_mean_mu5 |
logical |
.false. |
|
lremove_mean_muS |
logical |
.false. |
|
mu5_const |
real |
0. |
|
muS_const |
real |
0. |
|
phase_mu5 |
real |
0. |
|
phase_muS |
real |
0. |
|
radius_mu5 |
real |
0. |
|
sigma_mu5 |
real |
0. |
|
widthmu5 |
real |
0.5 |
|
widthmuS |
real |
0.5 |
Module special/collapse.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
cs2 |
real |
||
initspecial |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
mass_blackhole |
real |
0. |
Module special/coronae.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
dummy_init_pars |
real, dimension(1) |
0. |
Module special/disp_current.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
alpf |
real |
0. |
|
alpfpsi |
real |
0. |
|
ampl_a0 |
real |
0.0 |
|
ampl_ex |
real |
0.0 |
|
ampl_ey |
real |
0.0 |
|
ampl_ez |
real |
0.0 |
|
ampla0 |
real |
0.0 |
|
amplee |
real, dimension (ninit) |
0.0 |
, kx_aa=1.0, ky_aa=1.0, kz_aa=1.0 |
coupl_gy |
real |
.345 |
electroweak SU(2) x U(1) coupling of Higgs to U(1) |
cutoff_a0 |
real |
0.0 |
|
cutoff_ee |
real |
0.0 |
|
inita0 |
character(len=labellen) |
‘zero’ |
|
initee |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
initpower2_a0 |
real |
0.0 |
|
initpower2_ee |
real |
0.0 |
|
initpower_a0 |
real |
0.0 |
|
initpower_ee |
real |
0.0 |
|
kgaussian_a0 |
real |
0.0 |
|
kgaussian_ee |
real |
0.0 |
|
kpeak_a0 |
real |
0.0 |
|
kpeak_ee |
real |
0.0 |
|
kx_a0 |
real |
0.0 |
|
kx_ex |
real |
0.0 |
|
kx_ey |
real |
0.0 |
|
kx_ez |
real |
0.0 |
|
ky_a0 |
real |
0.0 |
|
ky_ex |
real |
0.0 |
|
ky_ey |
real |
0.0 |
|
ky_ez |
real |
0.0 |
|
kz_a0 |
real |
0.0 |
|
kz_ex |
real |
0.0 |
|
kz_ey |
real |
0.0 |
|
kz_ez |
real |
0.0 |
|
ldensity_add_je_heating |
logical |
.false. |
|
ldivE_as_aux |
logical |
.false. |
|
leedot_as_aux |
logical |
.false. |
|
lfixed_phase_ee |
logical |
.false. |
|
llongitudinalE |
logical |
.true. |
|
llorentzforce_ee |
logical |
.false. |
|
llorenz_gauge_disp |
logical |
.false. |
|
lno_noise_ee |
logical |
.false. |
|
loverride_c_light |
logical |
.false. |
|
lphi_hom |
logical |
.false. |
AB: these variables should have been defined in backreaction. |
lphi_linear_regime |
logical |
.false. |
AB: these variables should have been defined in backreaction. |
lpower_profile_file |
logical |
.false. |
|
lpsi_hom |
logical |
.false. |
|
lrandom_ampl_ee |
logical |
.false. |
|
lscale_tobox |
logical |
.true. |
|
lsigB_as_aux |
logical |
.false. |
|
lsigE_as_aux |
logical |
.false. |
|
lskip_projection_ee |
logical |
.false. |
|
lsolve_chargedensity |
logical |
.false. |
|
lswitch_off_Gamma |
logical |
.false. |
|
luse_scale_factor_in_sigma |
logical |
.false. |
|
ncutoff_a0 |
real |
0.0 |
|
ncutoff_ee |
real |
0.0 |
|
phase_a0 |
real |
0.0 |
|
phase_ex |
real |
0.0 |
|
phase_ey |
real |
0.0 |
|
phase_ez |
real |
0.0 |
|
power_filename |
character (len=labellen) |
‘power_profile.dat’ |
|
relhel_a0 |
real |
0.0 |
|
relhel_ee |
real |
0.0 |
|
weight_longitudinalE |
real |
2.0 |
Module special/electroweaksu2.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl_dW0 |
real, dimension(3) |
0.0 |
|
ampl_dWx |
real, dimension(3) |
0.0 |
|
ampl_dWy |
real, dimension(3) |
0.0 |
|
ampl_dWz |
real, dimension(3) |
0.0 |
|
ampl_W0 |
real, dimension(3) |
0.0 |
|
ampl_Wx |
real, dimension(3) |
0.0 |
|
ampl_Wy |
real, dimension(3) |
0.0 |
|
ampl_Wz |
real, dimension(3) |
0.0 |
|
amplWW |
real, dimension (ninit, 3) |
0.0 |
|
coupl_gw |
real |
.65 |
electroweak SU(2) x U(1) coupling of Higgs to SU(2) |
cutoff_dWW |
real, dimension(3) |
0.0 |
|
initdWW |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
initdWW0 |
character(len=labellen) |
‘nothing’ |
|
initpower2_dWW |
real, dimension(3) |
0.0 |
|
initpower2_WW |
real, dimension(3) |
0.0 |
|
initpower_dWW |
real, dimension(3) |
0.0 |
|
initpower_WW |
real, dimension(3) |
0.0 |
|
initWW |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
initWW0 |
character(len=labellen) |
‘nothing’ |
|
kgaussian_dWW |
real, dimension(3) |
0.0 |
|
kpeak_dWW |
real, dimension(3) |
0.0 |
|
kx_dWx |
real, dimension(3) |
0.0 |
|
kx_dWy |
real, dimension(3) |
0.0 |
|
kx_dWz |
real, dimension(3) |
0.0 |
|
kx_Wx |
real, dimension(3) |
0.0 |
|
kx_Wy |
real, dimension(3) |
0.0 |
|
kx_Wz |
real, dimension(3) |
0.0 |
|
ky_dWx |
real, dimension(3) |
0.0 |
|
ky_dWy |
real, dimension(3) |
0.0 |
|
ky_dWz |
real, dimension(3) |
0.0 |
|
ky_Wx |
real, dimension(3) |
0.0 |
|
ky_Wy |
real, dimension(3) |
0.0 |
|
ky_Wz |
real, dimension(3) |
0.0 |
|
kz_dWx |
real, dimension(3) |
0.0 |
|
kz_dWy |
real, dimension(3) |
0.0 |
|
kz_dWz |
real, dimension(3) |
0.0 |
|
kz_Wx |
real, dimension(3) |
0.0 |
|
kz_Wy |
real, dimension(3) |
0.0 |
|
kz_Wz |
real, dimension(3) |
0.0 |
|
ldivdotW_as_aux |
logical |
.false. |
, lsolve_chargedensityW=.false. |
lfixed_phase_WW |
logical |
.false. |
|
llongitudinalW |
logical |
.true. |
|
lno_noise_WW |
logical |
.false. |
|
lpower_profile_file |
logical |
.false. |
|
lscale_tobox |
logical |
.true. |
|
lskip_projection_WW |
logical |
.false. |
|
lWddot_as_aux |
logical |
.false. |
, lsolve_chargedensityW=.false. |
ncutoff_dWW |
real, dimension(3) |
0.0 |
|
phase_dWx |
real, dimension(3) |
0.0 |
|
phase_dWy |
real, dimension(3) |
0.0 |
|
phase_dWz |
real, dimension(3) |
0.0 |
|
phase_Wx |
real, dimension(3) |
0.0 |
|
phase_Wy |
real, dimension(3) |
0.0 |
|
phase_Wz |
real, dimension(3) |
0.0 |
|
power_filename |
character (len=labellen) |
‘power_profile.dat’ |
|
relhel_dWW |
real, dimension(3) |
0.0 |
|
weight_longitudinalW |
real |
2.0 |
Module special/flowaroundsphere.f90
The following variables are part of the flowaroundsphere_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
cylinder_temp |
real |
293.0 |
|
initspecial |
character(len=24) |
‘nothing’ |
|
ltest |
logical |
.false. |
|
nequator |
integer |
||
northern |
logical |
.true. |
|
skin_depth |
real |
0.0 |
|
southern |
logical |
.true. |
|
special_infuu |
real |
-1. |
|
special_inituu |
character(len=24) |
‘nothing’ |
|
sph_center_x |
integer |
||
sph_dia |
real |
||
sph_l1 |
integer |
||
sph_l2 |
integer |
||
sph_n1 |
integer |
||
sph_n2 |
integer |
||
sph_nx |
integer |
||
sph_ny |
integer |
||
sph_rad |
real |
||
sphere_radius |
real |
0.0 |
|
sphere_type |
character(len=24) |
‘none’ |
Module special/footpoints.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
n_pivot |
integer |
1 |
Module special/gravitational_waves.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplggT |
real |
0. |
|
amplggX |
real |
0. |
|
amplhhT |
real |
0. |
|
amplhhX |
real |
0. |
|
initggT |
character (len=labellen) |
‘nothing’ |
|
inithhT |
character (len=labellen) |
‘nothing’ |
|
kx_ggT |
real |
0. |
|
kx_hhT |
real |
0. |
|
ky_ggT |
real |
0. |
|
ky_hhT |
real |
0. |
|
kz_ggT |
real |
0. |
|
kz_hhT |
real |
0. |
|
lno_transverse_part |
logical |
.false. |
Module special/gravitational_waves_hij6.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplgij |
real |
0. |
|
amplhij |
real |
0. |
|
cstress_prefactor |
character (len=labellen) |
‘6’ |
|
ctrace_factor |
character (len=labellen) |
‘1/3’ |
|
fourthird_in_stress |
character (len=labellen) |
‘4/3’ |
|
initgij |
character (len=labellen) |
‘nothing’ |
|
inithij |
character (len=labellen) |
‘nothing’ |
|
kx_gij |
real |
0. |
|
kx_hij |
real |
0. |
|
ky_gij |
real |
0. |
|
ky_hij |
real |
0. |
|
kz_gij |
real |
0. |
|
kz_hij |
real |
0. |
|
lggTX_as_aux |
logical |
.true. |
|
lhhTX_as_aux |
logical |
.true. |
|
lno_transverse_part |
logical |
.false. |
|
lStress_as_aux |
logical |
.false. |
Module special/gravitational_waves_hTXk.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplGW |
real |
0. |
|
amplGW2 |
real |
0. |
|
amplGWX |
real |
0. |
|
cstress_prefactor |
character (len=labellen) |
‘6’ |
|
ctrace_factor |
character (len=labellen) |
‘1/3’ |
|
cutoff_GW |
real |
500. |
|
fourthird_in_stress |
character (len=labellen) |
‘4/3’ |
|
initGW |
character (len=labellen) |
‘nothing’ |
|
initpower2_gw |
real |
-4. |
|
initpower_gw |
real |
0. |
|
initpower_med_GW |
real |
1. |
|
kbreak_GW |
real |
0.5 |
|
kpeak_GW |
real |
1. |
|
kpeak_log_GW |
real |
1. |
|
lcomp_GWh_k |
logical |
.false. |
|
lcomp_GWs_k |
logical |
.false. |
|
ldark_energy_GW |
logical |
.false. |
|
ldouble_GW |
logical |
.false. |
|
lelectmag |
logical |
.false. |
|
lfactors_GW |
logical |
.false. |
|
lgamma_factor |
logical |
.false. |
|
lggTX_as_aux |
logical |
.true. |
|
lhhTX_as_aux |
logical |
.true. |
|
linflation |
logical |
.false. |
|
llogbranch_GW |
logical |
.false. |
|
lmagstress |
logical |
.true. |
|
lmatter_GW |
logical |
.false. |
|
lnew_switch_om2_min |
logical |
.false. |
|
lno_noise_GW |
logical |
.false. |
|
lno_transverse_part |
logical |
.false. |
|
lonly_mag |
logical |
.false. |
, lread_scl_factor_file=.false. |
lrandom_ampl_GW |
logical |
.false. |
|
lread_pulsar |
logical |
.false. |
|
lread_scl_factor_file |
(not found) |
||
lreal_space_gTX_as_aux |
logical |
.false. |
|
lreal_space_hij_as_aux |
logical |
.false. |
|
lreal_space_hTX_as_aux |
logical |
.false. |
|
lreheating_GW |
logical |
.false. |
|
lscalar |
logical |
.false. |
|
lscalar_phi |
logical |
.false. |
|
lscale_tobox |
logical |
.false. |
|
lStress_as_aux |
logical |
.true. |
|
nfact_GW |
real |
0. |
|
nfact_GWh |
real |
4. |
|
nfact_GWs |
real |
4. |
|
nfactd_GW |
real |
4. |
|
om2_min_factor |
real |
1e-4 |
(=keep this for now, but in future, we want to put it to 0. exactly) |
t_ini |
real |
60549 |
Module special/gross_pitaevskii.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl_gpe |
real, dimension(ninit) |
0. |
|
cutoff_gpe |
real |
0. |
|
eps_gpe |
real |
.5 |
|
g_gpe |
real |
1. |
|
gamma_gpe |
real |
0. |
|
initgpe |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
initpower2_gpe |
real |
-5./3. |
|
initpower_gpe |
real |
4. |
|
kgaussian_gpe |
real |
0. |
|
kpeak_gpe |
real |
1. |
|
kx_gpe |
real |
6. |
|
ky_gpe |
real |
6. |
|
kz_gpe |
real |
6. |
|
lno_noise_gpe |
logical |
.false. |
|
mu_gpe |
real |
1. |
|
n_gpe |
real |
10. |
|
nvortices |
integer |
2 |
|
phase_gpe |
real |
0. |
|
radius_gpe |
real |
1. |
|
relhel_gpe |
real |
0. |
|
test_sphere_radius |
real |
0. |
|
V0_gpe |
real |
0. |
|
vortex_quantization |
integer |
1 |
|
vortex_spacing |
real |
12.000 |
|
width_gpe |
real, dimension(ninit) |
0. |
|
xpos_gpe |
real, dimension(ninit) |
0. |
|
xslope_gpe |
real |
0. |
|
ypos_gpe |
real, dimension(ninit) |
0. |
|
zpos_gpe |
real, dimension(ninit) |
0. |
Module special/internal_flow.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampluu_spec |
real |
0 |
|
central_vel |
real |
0 |
|
initspecial |
character(len=24) |
‘nothing’ |
|
Re_tau |
real |
180 |
Module special/jet.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
initspecial |
character(len=24) |
‘nothing’ |
|
jet_center |
real, dimension(2) |
(/0.,0./) |
|
momentum_thickness |
real, dimension(2) |
(/0.014,0.0182/) |
|
radius |
real, dimension(2) |
(/0.0182,0.0364/) |
|
turb_inlet_dir |
character(len=fnlen) |
‘’ |
|
u_t |
real |
5. |
|
velocity_ratio |
real |
3.3 |
Module special/klein_gordon.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
alpha_usr |
real |
1. |
ultra-slow-roll potential parameters |
ampldphi |
real |
.0 |
|
ampldpsi |
real |
0. |
|
amplee_BD_prefactor |
real |
0. |
|
amplphi |
real |
.1 |
|
amplpsi |
real |
0. |
|
ascale_ini |
real |
1. |
|
beta_usr |
real |
1.4349 |
ultra-slow-roll potential parameters |
c_phi |
real |
1. |
|
c_psi |
real |
1. |
|
coupl_phipsi |
real |
0. |
|
cutoff_dphi |
real |
0. |
|
cutoff_phi |
real |
0. |
|
deriv_prefactor_ee |
real |
-1. |
|
dphi0 |
real |
-1.69e-7 |
|
echarge_type |
character (len=50) |
‘const’ |
|
eps |
real |
.01 |
|
eta_phi |
real |
0. |
|
higgs_friction |
real |
0. |
|
Hscript0 |
real |
0. |
|
Hscript_choice |
character (len=labellen) |
‘set’ |
|
init_rho_chi |
character (len=50) |
‘zero’ |
|
initpower2_dphi |
real |
0. |
|
initpower2_phi |
real |
0. |
|
initpower_dphi |
real |
0. |
|
initpower_phi |
real |
0. |
|
initspecial |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
kgaussian_phi |
real |
0. |
|
kpeak_dphi |
real |
0. |
|
kpeak_phi |
real |
0. |
|
kx_phi |
real |
1. |
|
ky_phi |
real |
0. |
|
kz_phi |
real |
0. |
|
lambda_phi |
real |
0. |
|
lambda_psi |
real |
0. |
|
lcompute_dphi0 |
logical |
.true. |
|
lem_backreact |
logical |
.false. |
|
lflrw |
logical |
.false. |
|
lhiggs_friction |
logical |
.false. |
|
lno_noise_dphi |
logical |
.false. |
|
lno_noise_phi |
logical |
.false. |
|
lphi_doublet |
logical |
.false. |
|
lphi_hypercharge |
logical |
.false. |
|
lphi_weakcharge |
logical |
.false. |
|
lrho_chi |
logical |
.false. |
|
lscale_tobox |
logical |
.true. |
|
lwaterfall |
logical |
.false. |
|
ncutoff_phi |
real |
1. |
|
offset |
real |
0. |
|
phase_phi |
real |
0. |
|
phi0 |
real |
.44 |
|
phi_v |
real |
.1 |
|
phimass |
real |
1.06e-6 |
|
psimass |
real |
1. |
|
rho_chi_init |
real |
0. |
|
scale_rho_chi_Heqn |
real |
1. |
|
V0_usr |
real |
4e-10 |
ultra-slow-roll potential parameters |
v_usr |
real |
0.3286335 |
ultra-slow-roll potential parameters |
Vprime_choice |
character (len=labellen) |
‘quadratic’ |
|
width_phi |
real |
.1 |
Module special/Lambda_CDM.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ascale_type |
(not found) |
||
Hubble0 |
real |
0.072 |
|
nconformal |
(not found) |
||
Omega_Lam |
real |
.73 |
|
Omega_rad |
real |
1e-4 |
|
redshift0 |
real |
4500. |
Module special/lorenz_gauge.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl |
real |
1e-3 |
|
cphi |
real |
1. |
|
etaphi |
real |
0. |
|
init |
character(len=50) |
‘zero’ |
|
kx |
real |
1. |
|
ky |
real |
0. |
|
kz |
real |
0. |
Module special/lucky_droplet.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
gam_lucky |
real |
Module special/magneticspiral.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
B0 |
real |
0.0064252940531717906 |
|
etamu0 |
real |
0.6 |
|
Omega0 |
real |
1.0 |
|
r0 |
real |
1.0 |
Module special/meanfield_alpm.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplalpm |
real |
.1 |
|
initalpm |
character (len=labellen) |
‘zero’ |
|
kx_alpm |
real |
1. |
|
ky_alpm |
real |
1. |
|
kz_alpm |
real |
1. |
Module special/meanfield_alpm_alternate.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplalpm |
real |
.1 |
|
initalpm |
character (len=labellen) |
‘zero’ |
|
kx_alpm |
real |
1. |
|
ky_alpm |
real |
1. |
|
kz_alpm |
real |
1. |
Module special/meanfield_alpm_etat.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplalpm |
real |
.1 |
|
ampletat |
real |
1. |
|
initalpm |
character (len=labellen) |
‘zero’ |
|
initetam |
character (len=labellen) |
‘constant’ |
|
kx_alpm |
real |
1. |
|
ky_alpm |
real |
1. |
|
kz_alpm |
real |
1. |
Module special/meanfield_dynamo_z.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl |
real |
1e-3 |
|
init |
character(len=50) |
‘zero’ |
|
kx |
real |
1. |
|
ky |
real |
0. |
|
kz |
real |
0. |
Module special/meanfield_e_tensor.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
acoef_name |
character (len=fnlen) |
||
acoef_scale |
real |
||
alpha_name |
character (len=fnlen) |
||
alpha_scale |
real |
||
bcoef_name |
character (len=fnlen) |
||
bcoef_scale |
real |
||
beta_name |
character (len=fnlen) |
||
beta_scale |
real |
||
dataset |
character (len=fnlen) |
||
dataset_name |
character (len=fnlen) |
||
dataset_type |
character (len=fnlen) |
||
delta_name |
character (len=fnlen) |
||
delta_scale |
real |
||
emftensors_file |
character (len=fnlen) |
‘emftensors.h5’ |
|
gamma_name |
character (len=fnlen) |
||
gamma_scale |
real |
||
interpname |
character (len=fnlen) |
||
kappa_name |
character (len=fnlen) |
||
kappa_scale |
real |
||
lacoef |
logical |
.false. |
|
lacoef_c |
logical, dimension(6) |
||
lalpha |
logical |
.false. |
|
lalpha_c |
logical, dimension(6) |
||
lbcoef |
logical |
.false. |
|
lbcoef_c |
logical, dimension(3,6) |
||
lbeta |
logical |
.false. |
|
lbeta_c |
logical, dimension(6) |
||
ldelta |
logical |
.false. |
|
ldelta_c |
logical, dimension(3) |
||
lgamma |
logical |
.false. |
|
lgamma_c |
logical, dimension(3) |
||
lkappa |
logical |
.false. |
|
lkappa_c |
logical, dimension(3,6) |
||
lloop |
logical |
.false. |
|
lumean |
logical |
.false. |
|
lumean_c |
logical, dimension(3) |
||
lusecoefs |
logical |
.false. |
|
umean_name |
character (len=fnlen) |
||
umean_scale |
real |
Module special/neutron_star.f90
The following variables are part of the neutron_star_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
accretion_flux |
real |
0. |
|
beta_hand |
real |
1. |
|
hot_star |
logical |
.false. |
|
initnstar |
character (len=labellen) |
‘default’ |
|
l1D_cooling |
logical |
.false. |
|
l1D_heating |
logical |
.false. |
|
L_disk_point |
integer |
0 |
|
laccelerat_zone |
logical |
.false. |
|
ldecelerat_zone |
logical |
.false. |
|
leffective_gravity |
logical |
.false. |
|
lextrapolate_bot_density |
logical |
.false. |
|
lgrav_x_mdf |
logical |
.false. |
|
lmass_source_NS |
logical |
.false. |
|
lnstar_1D |
logical |
.false. |
|
lnstar_entropy |
logical |
.false. |
|
lnstar_T_const |
logical |
.false. |
|
lsurface_zone |
logical |
.false. |
|
ltop_velocity_kep |
logical |
.false. |
|
M_star |
real |
1. |
|
nu_for_1D |
real |
1. |
|
R_star |
real |
1. |
|
rho_disk |
real |
1. |
|
rho_star |
real |
1. |
|
rho_surf |
real |
1. |
|
star_rot |
real |
0. |
|
T_disk |
real |
1. |
|
T_disk_const |
logical |
.false. |
|
T_star |
real |
1. |
|
uu_init |
real |
0. |
Module special/newton_cooling.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
taucool_floor |
real |
Module special/oscillation_0D.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
init |
character(len=50) |
‘zero’ |
|
om1 |
real |
||
om2 |
real |
||
u1ini |
real |
||
u2ini |
real |
Module special/oscillation_0D_Lorenz.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl |
real, dimension (ninit) |
0. |
|
bet |
real |
||
gam |
real |
||
init |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
rho |
real |
||
xxini |
real |
||
yyini |
real |
||
zzini |
real |
Module special/oscillation_3D.f90
The following variables are part of the oscillation_3D_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl_dpsi |
real |
0. |
|
ampl_psi |
real |
0. |
|
init_psi |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
initpower2_dpsi |
real |
0. |
|
initpower2_psi |
real |
0. |
|
initpower_dpsi |
real |
0. |
|
initpower_psi |
real |
0. |
|
kpeak_dpsi |
real |
0. |
|
kpeak_psi |
real |
0. |
|
lscale_tobox_psi |
logical |
.true. |
Module special/param_instab.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
init |
character(len=50) |
‘zero’ |
|
u1ini |
real |
0. |
|
u2ini |
real |
0. |
Module special/photoelectric_dust.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
const_pr |
real, dimension(ndustspec) |
0.0 |
|
factor_localiso |
real |
0.0 |
|
factor_photoelectric |
real |
1.0 |
|
kappa |
real |
0.0 |
|
ldivrhop_by_vol |
logical |
.false. |
|
ldust_pressureforce |
logical |
.true. |
|
lradiation_PRdrag |
logical |
.false. |
|
mu |
real |
1.0 |
Module special/planet_atmosphere.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
Bext_ampl |
real |
0. |
|
cp_ref |
real |
1.44e4 |
unit: [J/(kg*K)] |
cs_ref |
real |
2.e3 |
unit: [m/s] |
dTeqbot |
real |
0. |
unit: [K] |
dTeqtop |
real |
100. |
unit: [K] |
frac_sponge_polar |
real |
0 |
|
frac_sponge_r |
real |
0 |
|
iBext |
character (len=labellen) |
‘nothing’ |
|
lat_ss |
real |
0. |
unit: [degree] |
leta_planet_as_aux |
logical |
.false. |
|
linit_equilibrium |
logical |
.false. |
|
lon_ss |
real |
0. |
unit: [degree] |
pbot0 |
real |
1.e7 |
unit: [Pa] |
peqbot |
real |
1.d6 |
unit: [Pa] |
peqtop |
real |
1.d2 |
unit: [Pa] |
pradbot |
real |
1.d6 |
unit: [Pa] |
pradtop |
real |
1.d3 |
unit: [Pa] |
q_drag |
real |
0.0 |
|
q_sponge_polar |
real |
0.0 |
|
q_sponge_r |
real |
0.0 |
|
R_planet |
real |
9.5e7 |
unit: [m] |
rho_ref |
real |
1.e-2 |
unit: [kg/m3] |
T_ref |
real |
1533 |
unit: [K] |
tauradbot |
real |
1.d7 |
unit: [s] |
tauradtop |
real |
1.d4 |
unit: [s] |
Module special/pressure_bump.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
pb_amplitude |
real |
1.0 |
|
pb_type |
character (len=labellen) |
‘none’ |
Module special/radial_dist_func.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
file_in |
character(LEN=labellen) |
‘../np_ap1.dat’ |
|
lloffset_search |
logical |
.false. |
|
rdf_stride_inner |
integer |
1 |
|
rdf_stride_outer |
integer |
1 |
Module special/reaction_0D.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
AA0 |
integer |
10 |
|
DD0 |
integer |
0 |
|
init_qq |
character(len=50) |
‘set’ |
|
LL0 |
integer |
0 |
Module special/rel_1d.f90
The following variables are part of the rel_1d_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
alp |
real |
0. |
|
amplspecial |
real |
.1 |
|
initspecial |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
lbet_as_aux |
logical |
.false. |
|
r0 |
real |
3. |
|
width |
real |
.1 |
Module special/schur_triple_decomp.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
lbschur2_as_aux |
logical |
.false. |
|
lbschur_as_aux |
logical |
.false. |
|
lbschurm_as_aux |
logical |
.false. |
|
lbschurp2_as_aux |
logical |
.false. |
|
leig_as_aux |
logical |
.false. |
|
loee_as_aux |
logical |
.false. |
|
lovRR_as_aux |
logical |
.false. |
|
lovSH_as_aux |
logical |
.false. |
|
luschur2_as_aux |
logical |
.false. |
|
luschur_as_aux |
logical |
.false. |
|
luschurm_as_aux |
logical |
.false. |
|
luschurp2_as_aux |
logical |
.false. |
Module special/shallow_water.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
interval_between_storms |
real |
17.0 |
|
lautotest_mode |
logical |
.false. |
|
rsize_storm |
real |
0.03 |
|
storm_strength |
real |
||
tduration |
real |
17.0 |
Module special/shell.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
deltG |
real |
1e-5 |
internal time step |
div_phase |
real |
1. |
divisor for phase changes |
f_amp |
real |
1.0 |
forcing amplitude |
k_amp |
real |
1. |
k normalization |
l_altu |
logical |
.false. |
removes a 3cycle from the GOY model |
l_needspecialuu |
logical |
.false. |
Need real-space velocity |
l_nogoy |
logical |
.false. |
|
l_qphase |
logical |
.true. |
NOT update real-space velocity vectors |
l_quenched |
logical |
.true. |
NOT update real-space velocity vectors |
lambda |
real |
2. |
shell separation |
maxshell |
integer |
-1 |
bounds of physically relevant |
minshell |
integer |
-1 |
bounds of physically relevant |
minshell2 |
integer |
-1 |
bounds of physically relevant |
nshell |
integer |
20 |
number of shells |
nstability1 |
real |
1e6 |
timesteps during start |
nstability2 |
real |
1e6 |
timesteps during start |
nstability3 |
real |
1e6 |
timesteps during start |
stability_output |
integer |
100000 |
|
u_amp |
real |
1. |
u normalization |
visc |
real |
1e-7 |
viscosity |
Module special/solar_corona.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
linit_lnrho |
logical |
.false. |
|
linit_lnTT |
logical |
.false. |
|
linit_uu |
logical |
.false. |
|
lslope_limited_special |
logical |
.false. |
|
prof_type |
character(len=labellen) |
‘nothing’ |
Module special/spiegel.f90
The following variables are part of the neutron_star_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
initnstar |
character (len=labellen) |
‘default’ |
|
ldecelerat_zone |
logical |
.false. |
|
lnstar_entropy |
logical |
.false. |
|
lraddif_local |
logical |
.false. |
|
lsurface_zone |
logical |
.false. |
|
M_star |
real |
0. |
|
R_star |
real |
0. |
|
rho_bot |
real |
1. |
|
rho_top |
real |
1. |
|
T_bot |
real |
0. |
|
uu_left |
real |
0. |
|
uy_left |
real |
0. |
|
uy_right |
real |
0. |
Module special/stellartide.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
lgravity_fourth_order |
logical |
.true. |
|
lgravity_second_order |
logical |
.true. |
|
lgravity_third_order |
logical |
.true. |
|
mstar |
real |
1000. |
|
Omegap |
real |
1.0 |
Module special/streamfunction.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
alpha |
real |
1.65d-4 |
Thermal expansivity in K^-1 |
alpha_sor |
real |
||
amplpsi |
real |
1d-5 |
amplitude of initial perturbation for psi |
ampltt |
real |
0.01 |
|
Avisc |
real |
4.00 |
constants for viscosity prescriptions |
Bvisc |
real |
0.00 |
|
Cvisc |
real |
0.00 |
|
eta_0 |
real |
1d13 |
Viscosity at melting temperature in Pa s |
gravity_z |
real |
1.3 |
gravity in m/s^2 |
iconv_viscosity |
character (len=labellen) |
‘Newtonian’ |
|
initpsi |
character (len=labellen) |
‘nothing’ |
|
iorder_sor_solver |
character (len=labellen) |
‘high_order’ |
|
kappa |
real |
1d-6 |
Thermal diffusivity in m^2/s |
kx_TT |
real |
2* |
|
kz_TT |
real |
||
lgauss_seidel |
logical |
||
lomega_jacobi |
logical |
||
lpoisson_test |
logical |
.false. |
|
lprint_residual |
logical |
.false. |
|
lsave_residual |
logical |
.true. |
|
maxit |
integer |
1000 |
|
Ra |
real |
||
rho0_bq |
real |
917. |
density in Kg/m^3, Boussinesq value |
Tbot |
real |
270 |
|
tolerance |
real |
1d-3 |
|
Tupp |
real |
100 |
Module special/streamfunction_dimensional.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
alpha_sor |
real |
||
alpha_thermal |
real |
1.65d-4 |
Thermal expansivity in K^-1 |
amplpsi |
real |
1d-5 |
amplitude of initial perturbation for psi |
ampltt |
real |
0.01 |
|
Avisc |
real |
4.00 |
constant |
eta_0 |
real |
1d13 |
Viscosity at melting temperature in Pa s |
gravity_z |
real |
1.3 |
gravity in m/s^2 |
iconv_viscosity |
character (len=labellen) |
‘Newtonian’ |
|
initpsi |
character (len=labellen) |
‘nothing’ |
|
iorder_sor_solver |
character (len=labellen) |
‘high_order’ |
|
kappa |
real |
1d-6 |
Thermal diffusivity in m^2/s |
kx_TT |
real |
2* |
|
kz_TT |
real |
||
lprint_residual |
logical |
.false. |
|
lsave_residual |
logical |
.true. |
|
maxit |
integer |
1000 |
|
Ra |
real |
||
rho0_bq |
real |
917. |
density in Kg/m^3, Boussinesq value |
Tbot |
real |
270 |
|
tolerance |
real |
1d-3 |
|
Tupp |
real |
100 |
Module special/streamfunction_direct.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
alpha |
real |
1.65d-4 |
Thermal expansivity in K^-1 |
alpha_sor |
real |
||
amplpsi |
real |
1d-5 |
amplitude of initial perturbation for psi |
Avisc |
real |
4.00 |
constant |
eta_0 |
real |
1d13 |
Viscosity at melting temperature in Pa s |
gravity_z |
real |
1.3 |
gravity in m/s^2 |
iconv_viscosity |
character (len=labellen) |
‘Newtonian’ |
|
iorder_matrix_solver |
character (len=labellen) |
‘6th_order’ |
|
kappa |
real |
1d-6 |
Thermal diffusivity in m^2/s |
lprint_residual |
logical |
.false. |
|
lrayleigh_nodensity |
logical |
.false. |
|
maxit |
integer |
1000 |
|
Ra |
real |
||
rho0_bq |
real |
917. |
density in Kg/m^3, Boussinesq value |
Tbot |
real |
270 |
|
tolerance |
real |
1d-3 |
|
Tupp |
real |
100 |
Module special/streamfunction_fullmultigrid.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
alpha_sor |
real |
||
alpha_thermal |
real |
1.65d-4 |
Thermal expansivity in K^-1 |
amplpsi |
real |
1d-5 |
amplitude of initial perturbation for psi |
ampltt |
real |
0.01 |
|
Avisc |
real |
4.00 |
constants for viscosity prescriptions |
Bvisc |
real |
0.00 |
|
Cvisc |
real |
0.00 |
|
eta_0 |
real |
1d13 |
Viscosity at melting temperature in Pa s |
gravity_z |
real |
1.3 |
gravity in m/s^2 |
iconv_viscosity |
character (len=labellen) |
‘Newtonian’ |
|
igamma |
integer |
1 |
|
initpsi |
character (len=labellen) |
‘nothing’ |
|
iorder_sor_solver |
character (len=labellen) |
‘high_order’ |
|
kappa |
real |
1d-6 |
Thermal diffusivity in m^2/s |
kx_TT |
real |
2* |
|
kz_TT |
real |
||
ladimensional |
logical |
.true. |
|
ldirect_solver |
logical |
.true. |
|
lmultigrid |
logical |
.true. |
|
lpoisson_test |
logical |
.false. |
|
lprint_residual |
logical |
.false. |
|
lsave_residual |
logical |
.true. |
|
lsave_residual_grid |
logical |
.false. |
|
lsplit_temperature |
logical |
.false. |
|
maxit |
integer |
1000 |
|
n_vcycles |
integer |
1 |
|
npost |
integer |
5 |
|
npre |
integer |
5 |
|
nx_coarsest |
integer |
3 |
|
Ra |
real |
||
rho0_bq |
real |
917. |
density in Kg/m^3, Boussinesq value |
Tbot |
real |
270 |
|
tolerance |
real |
1d-6 |
|
Tupp |
real |
100 |
Module special/streamfunction_multigrid.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
alpha_sor |
real |
||
alpha_thermal |
real |
1.65d-4 |
Thermal expansivity in K^-1 |
amplpsi |
real |
1d-5 |
amplitude of initial perturbation for psi |
ampltt |
real |
0.01 |
|
Avisc |
real |
4.00 |
constants for viscosity prescriptions |
Bvisc |
real |
0.00 |
|
Cvisc |
real |
0.00 |
|
eta_0 |
real |
1d13 |
Viscosity at melting temperature in Pa s |
gamma |
integer |
1 |
|
gravity_z |
real |
1.3 |
gravity in m/s^2 |
iconv_viscosity |
character (len=labellen) |
‘Newtonian’ |
|
initpsi |
character (len=labellen) |
‘nothing’ |
|
iorder_sor_solver |
character (len=labellen) |
‘high_order’ |
|
kappa |
real |
1d-6 |
Thermal diffusivity in m^2/s |
kx_TT |
real |
2* |
|
kz_TT |
real |
||
ladimensional |
logical |
.true. |
|
ldirect_solver |
logical |
.true. |
|
lmultigrid |
logical |
.true. |
|
lpoisson_test |
logical |
.false. |
|
lprint_residual |
logical |
.false. |
|
lprint_residual_svl |
logical |
.false. |
|
lsave_residual |
logical |
.true. |
|
lsplit_temperature |
logical |
.false. |
|
maxit |
integer |
1000 |
|
n_vcycles |
integer |
1 |
|
npost |
integer |
5 |
|
npre |
integer |
5 |
|
nx_coarsest |
integer |
3 |
|
Ra |
real |
||
rho0_bq |
real |
917. |
density in Kg/m^3, Boussinesq value |
Tbot |
real |
270 |
|
tolerance |
real |
1d-3 |
|
Tupp |
real |
100 |
Module special/symbreak.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
ampl |
real, dimension (ninit) |
0. |
|
beta_imag |
real |
||
beta_real |
real |
||
gam |
real |
||
gam_imag |
real |
||
init |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
Limag_ini |
real |
||
Lreal_ini |
real |
||
mu_imag |
real |
||
mu_real |
real |
||
rho |
real |
||
Rimag_ini |
real |
||
Rreal_ini |
real |
Module special/turbpotential.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
alpha |
real |
0.01 |
|
lautotest_mode |
logical |
.false. |
|
lcalc_potturb |
logical |
.true. |
Calculate the turbulent potential |
lcap_modes_at_m6 |
logical |
.false. |
Set amplitude of modes higher than m>6 to zero. |
lgravitational_turbulence |
logical |
.false. |
Choose between asp ratio 4 for the modes (GI) or 1/h (MRI) |
ltime_dependant_amplitude |
logical |
.true. |
Term that makes the modes come in and out of existence smoothly |
lturbulent_force |
logical |
.true. |
Add the turbulent potential to the momentum equation |
lupdate_as_var |
logical |
.false. |
Writes modes.dat and MODESN like var.dat and VARN |
rmodes_ext |
real |
emulate a dead zone |
|
rmodes_int |
real |
Module special/twist_inject.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
alpha |
real |
1.25 |
|
border_width |
real |
0.1 |
|
C_heatflux |
real |
132.0 |
|
cool_RTV |
real |
||
cool_RTV_cutoff |
integer |
2 |
|
cool_type |
integer |
5 |
|
cs0p |
real |
0.104 |
|
dposx |
real |
0.0 |
|
dposz |
real |
0.0 |
|
dtilt |
real |
0.0 |
|
heat_FS |
real |
9.74d-4 |
|
heat_LH |
real |
0.2783 |
|
heat_vol |
real |
0.0 |
|
Ilimit |
real |
0.15 |
|
lactivate_reservoir |
logical |
.false. |
|
lnrho_min |
real |
||
lnrho_min_tau |
real |
1.0 |
|
lnTT_max |
real |
||
lnTT_max_tau |
real |
1.0 |
|
lnTT_min |
real |
||
lnTT_min_tau |
real |
1.0 |
|
lnTT_sponge_tau |
real |
1.0 |
|
lset_boundary_emf |
logical |
.false. |
|
lset_sponge_lnTT |
logical |
.false. |
|
lslope_limited_special |
logical |
.false. |
|
lslope_limited_specialposx |
(not found) |
||
lupin |
logical |
.false. |
|
nlf |
integer |
4 |
|
poslimit |
real |
0.98 |
|
posy |
real |
0.0 |
|
posz |
real, save |
||
res_fac |
real |
2.0 |
|
rhog |
real, dimension(4) |
||
tau_res |
real |
0.65 |
|
tilt |
real |
0.0 |
|
TTsponge |
real |
0.0 |
|
vel_hs |
real |
0.02 |
|
x_cutoff |
real |
Module special/van_der_pol.f90
The following variables are part of the special_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
init |
character(len=50) |
‘zero’ |
|
u1ini |
real |
1.5e-2 |
|
u2ini |
real |
0 |
Module test_methods/testfield_axisym4.f90
The following variables are part of the testfield_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplaatest |
real, dimension (ninit) |
0. |
|
B_ext |
real, dimension(3) |
(/0.,0.,0./) |
|
initaatest |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
kx_aatest |
real, dimension (ninit) |
1. |
|
ky_aatest |
real, dimension (ninit) |
1. |
|
kz_aatest |
real, dimension (ninit) |
1. |
|
ljxb_as_aux |
logical |
.false. |
|
luxb_as_aux |
logical |
.false. |
|
phasex_aatest |
real, dimension (ninit) |
0. |
|
phasez_aatest |
real, dimension (ninit) |
0. |
|
testfield_zaver_range |
real, dimension(2) |
||
zextent |
logical |
.true. |
Module test_methods/testfield_compress_z.f90
The following variables are part of the testfield_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplaatest |
real, dimension (ninit) |
0. |
|
amplhhtest |
real, dimension (ninit) |
0. |
|
ampluutest |
real, dimension (ninit) |
0. |
|
Btest_ext |
real, dimension(3) |
(/0.,0.,0./) |
|
cs0test |
real |
1. |
|
initaatest |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
inithhtest |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
inituutest |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
kx_aatest |
real, dimension (ninit) |
1. |
|
ky_aatest |
real, dimension (ninit) |
1. |
|
kz_aatest |
real, dimension (ninit) |
1. |
|
lfprestest |
logical |
.true. |
|
ljxb_as_aux |
logical |
.true. |
|
lSgh_as_aux |
logical |
.true. |
|
lSghtest |
logical |
.true. |
|
lugh_as_aux |
logical |
.true. |
|
lugu_as_aux |
logical |
.true. |
|
lugutest |
logical |
.true. |
|
luse_main_run |
logical |
.true. |
|
luxb_as_aux |
logical |
.true. |
|
phasex_aatest |
real, dimension (ninit) |
0. |
|
phasez_aatest |
real, dimension (ninit) |
0. |
|
zextent |
logical |
.true. |
Module test_methods/testfield_general.f90
The following variables are part of the testfield_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
B_ext |
real, dimension(3) |
(/0.,0.,0./) |
|
luxb_as_aux |
logical |
.false. |
Module test_methods/testfield_nonlin_z.f90
The following variables are part of the testfield_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplaatest |
real, dimension (ninit) |
0. |
|
Btest_ext |
real, dimension(3) |
(/0.,0.,0./) |
|
initaatest |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
kx_aatest |
real, dimension (ninit) |
1. |
|
kz_aatest |
real, dimension (ninit) |
1. |
|
ljxb_as_aux |
logical |
.false. |
|
lugu_as_aux |
logical |
.false. |
|
luse_main_run |
logical |
.true. |
|
luxb_as_aux |
logical |
.false. |
|
phasex_aatest |
real, dimension (ninit) |
0. |
|
phasez_aatest |
real, dimension (ninit) |
0. |
|
zextent |
logical |
.true. |
Module test_methods/testfield_x.f90
The following variables are part of the testfield_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplaatest |
real, dimension (ninit) |
0. |
|
B_ext |
real, dimension(3) |
(/0.,0.,0./) |
|
initaatest |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
kx_aatest |
real |
1. |
|
ky_aatest |
real |
1. |
|
kz_aatest |
real |
1. |
|
ljxb_as_aux |
logical |
.false. |
|
luxb_as_aux |
logical |
.false. |
|
zextent |
logical |
.true. |
Module test_methods/testscalar.f90
The following variables are part of the testscalar_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplcctest |
real, dimension (ninit) |
0. |
|
initcctest |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
kx_cctest |
real, dimension (ninit) |
1. |
|
ky_cctest |
real, dimension (ninit) |
1. |
|
kz_cctest |
real, dimension (ninit) |
1. |
|
lug_as_aux |
logical |
.false. |
|
phasex_cctest |
real, dimension (ninit) |
0. |
|
phasez_cctest |
real, dimension (ninit) |
0. |
|
zextent |
logical |
.true. |
Module test_methods/testscalar_axisym.f90
The following variables are part of the testscalar_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplcctest |
real, dimension (ninit) |
0. |
|
initcctest |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
kx_cctest |
real, dimension (ninit) |
1. |
|
ky_cctest |
real, dimension (ninit) |
1. |
|
kz_cctest |
real, dimension (ninit) |
1. |
|
lug_as_aux |
logical |
.false. |
|
phasex_cctest |
real, dimension (ninit) |
0. |
|
phasez_cctest |
real, dimension (ninit) |
0. |
|
testscalar_zaver_range |
real, dimension(2) |
||
zextent |
logical |
.true. |
Module test_methods/testscalar_simple.f90
The following variables are part of the testscalar_init_pars namelist:
Variable |
Type |
Default |
Meaning |
|---|---|---|---|
amplcctest |
real, dimension (ninit) |
0. |
|
initcctest |
character (len=labellen), dimension(ninit) |
‘nothing’ |
|
kx_cctest |
real, dimension (ninit) |
1. |
|
ky_cctest |
real, dimension (ninit) |
1. |
|
kz_cctest |
real, dimension (ninit) |
1. |
|
lug_as_aux |
logical |
.false. |
|
phasex_cctest |
real, dimension (ninit) |
0. |
|
phasez_cctest |
real, dimension (ninit) |
0. |
|
zextent |
logical |
.true. |